HIGH-SPEED EDGE CARD SYSTEMS 0.60 mm, 0.80 mm and 1.00 mm PITCH FEATURES & BENEFITS 56 Gbps PAM4 performance PCI Express 3.0, 4.0 and 5.0 Edge Rate contacts optimized for signal integrity performance and cycle life Up to 200 positions available Vertical, right-angle, edge mount, pass-through orientations Power/signal combo, press-fit tails, rugged weld tabs, locks and latches Mating cable assemblies available Rugged tucked Differential pair for Custom designs allow beam technology increased speed for misalignment in (HTEC8) (HSEC8-DP) the X-Y axes (HSEC1) KEY SPECIFICATIONS TOTAL INSULATOR CONTACT OPERATING CURRENT VOLTAGE LEAD-FREE SERIES PITCH POSITIONS MATERIAL MATERIAL TEMP RANGE RATING RATING SOLDERABLE HSEC6 0.60 mm 56-168 Black LCP Copper Alloy -55 to +125 0.8 A (12 pins) 300 VAC Yes HTEC8 0.80 mm 40-200 Black LCP Copper Alloy -55 to +125 3.0 A (2 pins) 215 VAC Yes HSEC8 0.80 mm 18-200 Black LCP BeCu -55 to +125 2.8 A (2 pins) 240 VAC Yes HSEC1 1.00 mm 20-140 Black LCP Phosphor Bronze -55 to +125 2.2 A (2 pins) 215 VAC Yes View complete specifications at: samtec.com HSEC6-DV F-221 samtec.com/EdgeCard samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice. 1.00 mm (.0394 ) PITCH VERTICAL HIGH-SPEED EDGE CARD POSITIONS CARD PLATING OTHER OPTION - HSEC1 DV - PER ROW - THICKNESS - OPTION - - OPTIONS -A or -WT 010, 020, 01 L K required in callout =(1.60 mm) .062 = 10 (0.25 m) =(7.01 mm) .276 DIA 030, 040, thick card Gold on contact Polyimide Film A 050, 060, area, Matte Tin Pick & Place Pad =Alignment Pin on tail 070 (Not available TR with -WT) S =Tape & Reel = 30 (0.76 m) (Required for WT Gold on contact 10-60 positions) =Weld tab area, Matte Tin (Not available on tail FR with -A) = Full Reel Tape & Reel (must order max. quantity per reel contact Samtec for quantity breaks) (Required for 10-60 positions) (No. of Positions x (No. of Positions x HSEC1-DV (1.00) .03937 + (6.50) .256 (1.00) .03937 + (6.50) .256 Card Mates: (No. of Positions x (1.60 mm) .062 (5.60) (1.00) .03937 + (6.50) .256 (5.60) .220 thick card .220 (5.60) -010, -020 & -030 POSITIONS .220 (No. of Positions x (1.00) .03937 + (9.50) .374 (No. of Positions x (1.00) .03937 + (9.50) .374 (2.00) .079 (2.00) .079 (No. of Positions x (1.00) .03937 + (9.50) .374 (2.00) .079 B B A A B -040, -050, -060 & -070 POSITIONS A (7.80) (7.98) (7.80) (7.98) .307 .314 .307 .314 10 YEAR MFG (7.80) (7.98) EXTENDED LIFE .307 .314 PRODUCT C (with -A) C (with -A) HIGH MATING CYCLES D (with -WT) D (with -WT) C (with -A) D (with -WT) C D POSITIONS PER ROW A B (with -A) (with -WT) 010 (11.30) .445 N/A (13.25) .522 (14.50) .571 (21.30) .839 N/A (23.25) .915 (24.50) .965 020 030 (31.30) 1.232 N/A (33.25) 1.309 (34.50) 1.358 (44.30) 1.744 (19.15) .754 (46.25) 1.821 (47.50) 1.870 040 050 (54.30) 2.138 (24.15) .951 (56.25) 2.215 (57.50) 2.264 (64.30) 2.531 (29.15) 1.148 (66.25) 2.608 (67.50) 2.657 060 070 (74.30) 2.925 (34.15) 1.344 (76.25) 3.002 (77.50) 3.051 Note: Some sizes, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com HSEC1-DV F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.