HSEC8-140-01-SM-DV-A Samtec

HIGH-SPEED EDGE CARD SYSTEMS 0.60 mm, 0.80 mm and 1.00 mm PITCH FEATURES & BENEFITS 56 Gbps PAM4 performance PCI Express 3.0, 4.0 and 5.0 Edge Rate contacts optimized for signal integrity performance and cycle life Up to 200 positions available Vertical, right-angle, edge mount, pass-through orientations Power/signal combo, press-fit tails, rugged weld tabs, locks and latches Mating cable assemblies available Rugged tucked Differential pair for Custom designs allow beam technology increased speed for misalignment in (HTEC8) (HSEC8-DP) the X-Y axes (HSEC1) KEY SPECIFICATIONS TOTAL INSULATOR CONTACT OPERATING CURRENT VOLTAGE LEAD-FREE SERIES PITCH POSITIONS MATERIAL MATERIAL TEMP RANGE RATING RATING SOLDERABLE HSEC6 0.60 mm 56-168 Black LCP Copper Alloy -55 to +125 0.8 A (12 pins) 300 VAC Yes HTEC8 0.80 mm 40-200 Black LCP Copper Alloy -55 to +125 3.0 A (2 pins) 215 VAC Yes HSEC8 0.80 mm 18-200 Black LCP BeCu -55 to +125 2.8 A (2 pins) 240 VAC Yes HSEC1 1.00 mm 20-140 Black LCP Phosphor Bronze -55 to +125 2.2 A (2 pins) 215 VAC Yes View complete specifications at: samtec.com HSEC6-DV F-221 samtec.com/EdgeCard samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice. (0.80 mm) .0315 PITCH VERTICAL EDGE CARD SOCKET POSITIONS CARD PLATING OTHER - HSEC8 1 DV A - PER ROW - THICKNESS - OPTION - - OPTIONS 09, 10, 13, 20, 01 L K = (1.60 mm) .062 = 10 (0.25 m) = Polyimide 25, 30, 37, 40, thick card Gold on contact Pick & Place Pad 49, 50, 60, 70, area, Matte Tin 03 on tail BL 80, 100 = Board Locks -01 card = (2.36 mm) .093 (13, 25, 49 only only (Weld tab standard) available with -L or thick card S -L2 option 09 only = 30 (0.76 m) available with L Gold on contact -L2 option = Latching Option area, Matte Tin 37 only available -01 card only on tail with -L option) (13, 25, 37, 49 only) (Weld tab standard) L2 = ECDP Latching -01 card only (09, 13, 25, 49 only) (For use with ECDP) (Weld tab standard) No. of Positions x (0.80) .0315 + (7.80) .307 WT HSEC8-DV No. of Positions x (0.80) .0315 + (7.80) .307 (7.00) = Weld tab .276 Card Mates: TR (7.00) (1.60 mm) .062 card A .276 = Tape & Reel (2.36 mm) .093 card B (09 - 70 only) HSC8 A B FR (7.98) Cable Mates: = Full Reel Tape & Reel .314 ECDP (must order max. (7.98) quantities per reel .314 contact Samtec for (No. of Positions + 6) x (0.80) .0315 + (0.60) .024 quantity breaks) (1.32) 09, 13, 25, 37 & 40 .052 (09-70 only) (No. of Positions + 6) x (0.80) .0315 + (0.60) .024 THRU 100 POSITIONS (1.32) No. of Positions .052 x (0.80) .0315 + (4.60) .181 No. of Positions (5.60) x (0.80) .0315 + (4.60) .181 .220 (5.60) No. of Positions x (0.80) .0315 + (2.20) .087 .220 No. of Positions x (0.80) .0315 + (2.20) .087 10, 20, & 30 POSITIONS POSITIONS OTHER SOLUTIONS A B CABLE CONNECTOR PER ROW 09* (4.50) .177 (11.80) .465 ECDP-04 HSEC8-109-L2 For complete edge card system 13* (6.10) .240 (15.00) .591 ECDP-08 HSEC8-113-L2 with cards and sockets, visit samtec.com RU8. 25* (6.10) .240 (24.60) .969 ECDP-16 HSEC8-125-L2 37 (18.10) .713 (34.20) 1.346 ECDP-32 HSEC8-149-L2 For a card to mate with 40 (18.90) .744 (36.60) 1.441 an HSEC8 socket, visit samte.com HSC8 49* (22.90) .902 (43.80) 1.724 50 (22.90) .902 (44.60) 1.756 60 (26.90) 1.059 (52.60) 2.071 70 (26.90) 1.059 (60.60) 2.386 10 YEAR MFG 80 (26.90) 1.059 (68.60) 2.701 EXTENDED LIFE PRODUCT 100 (26.90) 1.059 (84.60) 3.331 HIGH MATING Positions where no dimensions are given do CYCLES not have keying feature. * Mates with ECDP Series Available with -01 Card Only Note: Some sizes, styles and options are non-standard, View complete specifications at: samtec.com HSEC8-DV non-returnable. F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.