HIGH-SPEED EDGE CARD SYSTEMS 0.60 mm, 0.80 mm and 1.00 mm PITCH FEATURES & BENEFITS 56 Gbps PAM4 performance PCI Express 3.0, 4.0 and 5.0 Edge Rate contacts optimized for signal integrity performance and cycle life Up to 200 positions available Vertical, right-angle, edge mount, pass-through orientations Power/signal combo, press-fit tails, rugged weld tabs, locks and latches Mating cable assemblies available Rugged tucked Differential pair for Custom designs allow beam technology increased speed for misalignment in (HTEC8) (HSEC8-DP) the X-Y axes (HSEC1) KEY SPECIFICATIONS TOTAL INSULATOR CONTACT OPERATING CURRENT VOLTAGE LEAD-FREE SERIES PITCH POSITIONS MATERIAL MATERIAL TEMP RANGE RATING RATING SOLDERABLE HSEC6 0.60 mm 56-168 Black LCP Copper Alloy -55 to +125 0.8 A (12 pins) 300 VAC Yes HTEC8 0.80 mm 40-200 Black LCP Copper Alloy -55 to +125 3.0 A (2 pins) 215 VAC Yes HSEC8 0.80 mm 18-200 Black LCP BeCu -55 to +125 2.8 A (2 pins) 240 VAC Yes HSEC1 1.00 mm 20-140 Black LCP Phosphor Bronze -55 to +125 2.2 A (2 pins) 215 VAC Yes View complete specifications at: samtec.com HSEC6-DV F-221 samtec.com/EdgeCard samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.4.0 CAPABLE (0.80 mm) .0315 PITCH RUGGED HIGH-SPEED EDGE CARD SOCKET POSITIONS PLATING OTHER OPTION HTEC8 1 01 DV - PER ROW - - OPTION - - - OPTIONS Leave blank for no 20, 30, 40, 50, L K alignment pin = (7.00 mm) .276 DIA = 10 (0.25 m) 60, 80, 100 Polyimide Gold on contact area, Pick & Place Pad A Matte Tin on tail = Alignment Pin TR S = Tape & Reel WT = 30 (0.76 m) (20 thru 60 = Weld Tab Gold on contact area, positions only) (-A option required) Matte Tin on tail (Leave blank for tray) FR = Full Reel Tape & Reel (must order max. quantity per reel contact Samtec for quantity breaks) (20 thru 60 positions only) (Leave blank for tray) HTEC8 Card Mates: (1.60 mm) .062 thick card No. of Positions x (0.80) .0315 + (7.80) .307 C D F E G 40, 50, 60, 80 & 100 POSITIONS No. of Positions x (0.80) .0315 + (4.60) .181 A B POSITIONS C (7.00) D E F G PER ROW .276 40 (36.60) 1.440 (18.90) .744 (16.80) .661 (15.70) .618 (34.40) 1.354 50 (44.60) 1.756 (22.90) .902 (20.80) .819 (19.70) .776 (42.40) 1.669 No. of Positions x (0.80) .0315 + (7.80) .307 No. of Positions x (0.80) .0315 + (7.80) .307No. of Positions x (0.80) .0315 + (7.80) .307 60 (52.60) 2.071 (26.90) 1.059 (24.80) .976 (23.70) .933 (50.40) 1.984 C (7.80) CC D (8.00) F (1.48) DD .307 FF 80 (68.60) 2.701 (26.90) 1.059 (24.80) .976.315 (39.70) 1.563 (66.40) 2.614 .058 100 (84.60) 3.331 (26.90) 1.059 (24.80) .976 (55.70) 2.193 (82.40) 3.244 (0.64) No. of Positions x (0.80) .0315 + (2.20) .087 .025 E EE G GG No. of Positions x (0.80) .0315 + (4.60) .181 POSITIONS No. of Positions x (0.80) .0315 + (4.60) .181No. of Positions x (0.80) .0315 + (4.60) .181 A B A PER ROW AA B B B 20 (17.40) .685 (15.20) 5.98 (7.00) (7.00) (7.00) .276 30 (25.40) 1.000 (23.20) .913 .276 .276 (7.80) (8.00) (7.80) (1.48) (7.80) .307 (8.00)(8.00) (1.48)(1.48) .315 .307 .058 .307 .315.315 .058.058 (0.64) No. of Positions x (0.80) .0315 + (2.20) .087 (0.64)(0.64) .025 No. of Positions x (0.80) .0315 + (2.20) .087No. of Positions x (0.80) .0315 + (2.20) .087 .025.025 20 & 30 POSITIONS WT OPTION Note: Some sizes, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com HTEC8 F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.