HTSW-120-07-S-T Samtec

F-219 HTSW11611GS 10 YEAR MFG WITH 30 GOLD EXTENDED LIFE PRODUCT HIGH MATING CYCLES TSW20909FSRA HTSW11505LQ (2.54 mm) .100 THROUGH-HOLE .025 SQ POST HEADER Board Mates: NO. PINS SSW, SSQ, SSM, ESW, ESQ, TYPE STRIP PIN CENTERS PER ROW BCS, BSW, CES, SLW Cable Mates: IDSD, IDSS .200 (5.08 mm) Centers, .100 (2.54 mm) Centers, Standard = = = 2 1 Every Other Position Filled TSW Strip All Positions Filled SPECIFICATIONS (2.54) (5.08) .100 .200 For complete specifications Hi-Temp = see www.samtec.com TSW HTSW Strip or www.samtec.com HTSW Insulator Material: TSW: Black Glass Filled Polyester HTSW: Natural Liquid Crystal Polymer Terminal Material: (2.54) .100 x No. of Positions (2.54) Phosphor Bronze .100 Straight (2.54) (2.48) Plating: S .100 .098 Au or Sn over 50 (1.27 m) Ni Pin (2.54) 50 01 Operating Temp Range: .100 02 100 Versions -55 C to +125 C with Gold -55 C to +105 C with Tin (5.08) (2.54) (5.02) Voltage Rating: .200 .100 .198 D 550 VAC mated with SSW 500 VAC mated with 01 99 BCS or ESQ 03 150 450 VAC -RA/-RE mated with BCS or SSM (2.54) .100 400 VAC mated with CES (7.62) (7.56) (5.08) .300 .200 .298 RoHS Compliant: Yes T LeadFree Solderable: HTSW: Yes 01 148 TSW: No, Lead Wave Only 03 150 CURRENT RATING 01 (PER PIN) (5.08) (7.56) (7.62) .300 .200 .298 TSW mated with thru Q ESW SSW SLW SSQ SSM BCS SNT 50 01 148 5.2 A 5.7 A 5.2 A 6.3 A 5.2 A 4.6 A 4.3 A = .100 (2.54 mm) TSW HTSW Center Version 2 POSITIONS POWERED Right- (2.54) .100 x No. of Positions (2.54) .100 RECOGNITIONS Angle (3.02) (3.09) S (1.78) (1.78) .119 .122 Versions .070 .070 For complete scope 01 of recognitions see 02 www.samtec.com/quality 100 02 50 thru (2.54) APPLICATIONS (6.10) (5.56) D .100 .240 FILE NO. E111594 .219 25 (1.78) (1.78) TSW SSW .070 .070 = .200 (5.08 mm) 01 99 Center Version 03 150 (2.54) .100 (5.08) (8.12) (8.10) T .200 HORIZONTAL .320 .319 (1.78) (1.78) .070 .070 01 148 ALSO AVAILABLE 03 150 (MOQ Required) Other platings (5.08) (8.12) (8.10) Q .200 .320 .319 (1.78) (1.78) .070 .070 Note: 01 148 TSW HTSW Some lengths, styles and options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.TSW10910FDRA TSW11416GSRE HTSW12013TD TSW11207GT TSW, HTSW SERIES THROUGH-HOLE .025 SQ POST HEADER LEAD PLATING ROW OTHER OPTIONS STYLE OPTION OPTION S LC F RA or RE = Single = Gold flash on post, Matte Tin on tail = Locking Clip = Right-angle Row (Styles 08 thru 13 & 22 only) L NA D = 10 (0.25 m) Gold on post, Matte Tin on tail IDSS or IDSD = Right-angle STRIP ASSEMBLY = Double (using straight body for coplanar Row LOCKING .025 SQ CLIP mating with SSW-RA series) TERMINAL G STRIP (TSW) PC = 10 (0.25 m) Gold on post, Gold flash on balance BOARD T Requires 4 pin minimum = Triple (1.27) (NA with -T,-Q,-RA or -RE) T Row .050 = Matte Tin LA LL Q = RA Option = Double = Locking Lead with LL Option Row OTHER SOLUTIONS Two leads per strip crimped in (5.08 mm) opposite directions on or near .200 centerline. See charts for available Elevated Right-angle option styles. N/A with single row 1 or 2 XXX row positions. Recommended hole size = Polarized Position Shunts space (1.02 mm 0.03 mm) .040 .001 Straight Pin Versions Right-Angle Versions (Specify LEAD STYLE from chart) (Specify LEAD STYLE from chart and select RA or RE from other options) SINGLE ( S STYLE DOUBLE ( D) STYLE A B C A B C RA LEAD TRIPLE (T & Q) RE LEAD SINGLE C STYLE STYLE A C A (3.30) (8.51) (2.67) (23.62) (18.29) A A 05 18 .130 .335 .105 .930 .720 (2.29) (2.29) (2.29) (4.83) * * 08 09 (26.16) (20.83) (2.41) (7.62) (2.67) .090 .090 .090 .190 19 06 (2.79) 1.030 .820 .095 .300 .105 (7.37) * * (7.37) (7.37) (7.37) .110 09 10 (31.24) (25.91) (2.54) (10.92) .290 .290 .290 .290 20 07 1.230 1.020 .100 .430 (9.91) (5.84) * * (9.91) (9.91) (9.91) 11 10 (5.08) (13.46) (36.32) (30.99) .390 .230 .390 (5.84) .390 .390 21 08 .200 .530 1.430 1.220 .230 * * (12.45) (12.45) (12.45) (12.45) 12 (7.62) (16.00) 11 (10.16) (18.54) .490 .490 .490 .490 22 09 .300 .630 .400 .730 (5.84) (17.53) * (14.99) (14.99) (14.99) 13 (11.30) .230 12 (12.70) (21.08) (5.84) .690 .590 .590 .590 23 10 .445 .500 .830 .230 (2.92) (2.54) (8.13) * (20.07) (20.07) N/A 16 .115 (12.15) (6.73) 13 (15.24) (23.62) .100 .320 .790 .790 24 11 .480 .265 .600 .930 (22.61) * (5.08) (8.13) (5.08) (5.08) 21 (5.33) (16.00) (8.13) 16 (17.78) (26.16) .890 .200 .320 .200 .200 25 12 .210 .630 .320 * .700 1.030 * (2.29) (25.15) N/A N/A 22 (3.20) (11.58) 21 (22.86) (31.24) .090 .990 (5.84) (5.84) 26 13 .126 .456 .900 1.230 .230 (20.07) .230 (4.83) (4.83) (4.83) 27 (25.40) (33.78) (5.84) 22 (13.46) (8.13) .790 .190 .190 .190 27 14 1.000 1.330 .230 * (2.79) .530 .320 (14.99) (2.54) (8.13) (2.54) (2.54) 25 28 .110 (20.32) (28.70) (13.21) .590 .100 .320 .100 .100 15 28 .800 1.130 * (18.54) .520 (22.61) * 27 N/A (7.87) .730 (8.13) (23.11) (33.78) .890 *Available with LA (5.84) 16 29 .310 .320 .910 1.330 (8.13) (17.53) .230 (17.53) * (Locking Lead) Option 28 (18.03) (28.70) .320 (2.79) (21.08) (15.74) .690 .690 30 17 .710 1.130 N/A .110 .830 .620 * (20.32) 29 N/A (0.89) (9.27) (5.84) .800 (8.13) 41 * Available with LL + .035 .365 .230 .320 (15.24) (15.24) 30 (Locking Lead) Option (1.27) (11.94) (8.13) .600 .600 42 + .050 .470 .320 (0.64) .025 SQ Post + Style 41 & 42 available (1.78) with HTSW only070 C C C Except: Style 26 A A (0.46) .018 DIA Tail B (2.54) (2.54) .100 LEAD .100 B STYLE B (2.54) A (1.52) RA .100 .060 (2.54) (0.64) .025 SQ Tail (4.06) RE .100 .160 Specify -07 for best mate with IDXX Series IDC Cable Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.