ZW0613LD787118 F-219 DW1120TD825 HW1408GS300100 (2.54 mm) .100 DW, EW, ZW, HW-TH SERIES FLEXIBLE .025 SQ BOARD STACKERS Mates with: STACKER OTHER TYPE NO. PINS LEAD ROW SSW, SSQ, ESW, ESQ, PLATING HEIGHT OPTIONS CES, SLW, BSW, BCS, STRIP PER ROW STYLE OPTION OPTION SSM, HLE, PHF Cable Mates: IDSS, IDSD S XXX XXX = Single = ZW or HW = Stacker Row Tail Length Height DW SPECIFICATIONS Specify LEAD STYLE (in inches) (in inches) = (2.79 mm) from chart (1.40 mm) For complete specifications (5.08 mm) .110 Tail D .055 see www.samtec.com DW, .200 www.samtec.com EW, = Double minimum minimum LEAD OAL www.samtec.com ZW or STYLE Row Example: Example: www.samtec.com HW-TH (10.92) .430 250 07 250 Insulator Material: = (6.35 mm) = (6.35 mm) (13.46) .530 08 T DW, EW, ZW: Black Glass POST .250 .250 = Triple (0.00).000 Filled Polyester (18.54) .730 09 MIN Row HW: Natural Liquid (2.79) (21.08) .830 10 .110 Crystal Polymer Terminal Material: 11 (23.62) .930 STACKER Q Phosphor Bronze OVERALL HEIGHT STACKER (26.16) 1.030 (5.08) LENGTH 12 HEIGHT Plating: = Double .200 (OAL) MIN Au or Sn over (31.24) 1.230 Row .200 13 EW 50 (1.27 m) Ni ZW or (5.08 mm) = (8.38 mm) (36.32) 1.430 HW TAIL 14 Operating Temp Range: row space LENGTH .330 Tail (1.40) -55 C to +125 C with Gold (16.00) .630 15 TAIL .055 -55 C to +105 C with Tin MIN (1.40) .055 16 (11.30) .445 MIN RoHS Compliant: Yes (12.19) .480 17 LeadFree Solderable: 19 (33.78) 1.330 DW, EW, ZW: No, Lead Wave Only LL (28.70) 1.130 20 HW: Yes = Locking (8.38) Lead .330 (Shortest RECOGNITIONS dimension For complete scope of F between the recognitions see = Gold flash on contact, tail and the 01 thru 50 www.samtec.com/quality Matte Tin on tail post is the ZW end that will = Custom Tail be crimped. FILE NO. E111594 (2.54) .100 x L Available No. of Positions 01 50 = 10 (0.25 m) on tails from (2.54) Gold on contact area (2.29 mm) S .100 of longer tail, .090 to Matte Tin on tail (7.87 mm) 02 100 .310 only.) (5.08) (2.54) Single row, 01 D .200 .100 TAIL & 02 positions G LENGTH 01 99 & Q row not = 10 (0.25 m) available Gold on contact area 03 150 of longer tail, ALSO AVAILABLE T Gold flash on balance (MOQ Required) (7.52) (5.08) XXX HW .296 or Q* .200 Other platings = Polarized = High Temp T Custom Tail Specify omitted 01 148 Q* = Matte Tin pin position = Same as -T except middle row (2.54) Notes: .100 of pins For added mechanical stability, missing. Samtec recommends mechanical board spacers be (2.54) .100 used in applications with gold or selective gold plated connectors. TAIL Contact ipg samtec.com for LENGTH (0.64) .025 SQ TYP more information. This Series is non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Board to Board & Mezzanine Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : 10135583-642402LF 89885-310LF 589158040000018 6-1393048-0 68683-613 MDF7-12DP-2.54DSA MDF7-18P-2.54DSA(01) MDF7- 20DP-2.54DSA MDF7-26D-2.54DSA(55) MDF7-3P-2.54DSA(01) MDF7B-3P-2.54DSA(55) MDF7C-11P-2.54DSA(55) MDF7C-18P- 2.54DSA(55) MDF7C-5P-2.54DSA(01) MDF7P-5P-2.54DSA(55) 75234-0516 FCN-230C068-11 FCN-268F012-G/BD FCN-268F036-G/BD FCN-268M012-G/0D FCN-268M024-G/1D FCN-360C008-C FCN-360C040-C FCN-723J004/1 MIS-048-01-F-D-DP-K 832-10-034-10- 001000 93696-325LF 11828-1FA AXK630345P 18097-0013 ICA-328STT 2007042-2 304400-2 FCN-214Q030-G/0 FCN-215Q040-G/0 FCN-230C068-ESA FCN-234P048-G/0 FCN-235D050-G/C FCN-360A3 FCN-360C040-B 210-93-314-41-105000 2-22603-0 379-064-521- 202 MDF7-12P-2.54DSA(01) MDF7-16P-2.54DS(56) MDF7-40DP-2.54DSA(55) MDF7-8P-2.54DSA(55) MDF7B-16P-2.54DSA(55) AXG720047 5031084030