NOTES: REVISION BA C 1. REPRESENTS A CRITICAL DIMENSION. HW-XX-XX-XX-X-XXXX-SM-X-XXX 2. TUBE POSITIONS -05 THRU -36 ONLY POSITIONS -02 THRU -04 TO BE LAYER PACKAGED. No OF POSITIONS OPTION 2 3. MAXIMUM CUT FLASH: .020 0.51 CUT FLASH TO BE DO NOT POLARIZED POSITION -02 THRU -36 IN A NON-CRITICAL AREA LOCATED BETWEEN BODIES. SCALE FROM SPECIFY OMITTED PIN 4. FOR ADDED MECHANICAL STABILITY, SAMTEC RECOMMENDS LEAD STYLE THIS PRINT MECHANICAL BOARD SPACERS BE USED IN APPLICATIONS WITH OPTION 1 (SEE TABLE 1) GOLD OR SELECTIVE GOLD PLATED CONNECTORS. CONTACT -LC: LOCKING CLIP (SEE FIG 2, SHT 2) IPG SAMTEC.COM FOR MORE INFORMATION. (-D: USE RTSM-50-DVU, USE LC-05-TM) PLATING SPECIFICATION (-S: USE TSM-50-SV BODY, USE LC-08-TM-02) 36 02 -T: MATTE TIN ON CONTACT AND TAIL. -A: ALIGNMENT PIN (SEE FIG 3, SHT 2) -S: 30 SELECTIVE GOLD IN CONTACT AREA, (-S: 3 POSITION USE TSM-03-SV-A, .195 4.95 MATTE TIN ON TAIL. MUST BE MOLDED TO POSITION) REF -G: 10 SELECTIVE GOLD IN CONTACT AREA, (4-50 POSITIONS USE TSM-XX-SV-XX, 3 SELECTIVE GOLD ON TAIL. 2 POSITIONS TO USE TSM-48-SV-04) 35 01 -L: 10 SELECTIVE GOLD IN CONTACT AREA, (-D: FOR MOLDED TO POSITION, 2 MAX SWAY MATTE TIN ON TAIL. USE RTSM-50-DVU-XX BODY, .100 2.54 REF (EITHER DIRECTION) -TL: 250 TIN/LEAD ON CONTACT AND TAIL. AVAILABLE ON POS -02 THRU -36) -S: SINGLE ROW -H: 30 SELECTIVE GOLD IN CONTACT (-D: FOR STAKED, USE RTSM-50-DVU BODY, AREA, 3 SELECTIVE GOLD ON TAIL. 3 POS MIN) 02 72 -F: 3 SELECTIVE GOLD IN CONTACT AREA, -TR: TAPE & REEL MATTE TIN ON TAIL. (4 THRU 27 POSITIONS ONLY) -TM: MATTE TIN ON CONTACT AND TAIL. (MAX HEIGHT: .6875) .295 7.49 -SM: 30 SELECTIVE GOLD IN CONTACT AREA, LEAVE BLANK FOR NO HOLD DOWN OPTION REF MATTE TIN ON TAIL. (-D: USE RTSM-50-DVU, CAN BE CUT -LM: 10 SELECTIVE GOLD IN CONTACT AREA, TO POSITION, SEE FIG 1) MATTE TIN ON TAIL. 01 71 (-S: USE TSM-50-SV, CAN BE CUT -FM: 3 SELECTIVE GOLD IN CONTACT AREA, TO POSITION, SEE FIG 1) 2 MAX SWAY MATTE TIN ON TAIL200 5.08 REF (EITHER DIRECTION) SURFACE MOUNT ROW OPTION FIG 1 -D: DOUBLE ROW HW-XX-10-XX-X-675-SM SHOWN (USE RTSM-50-DVU FOR BOTTOM INSULATOR) BOARD SPACE (USE WRTSM-50-DVU FOR TOP INSULATOR) = -XXX -S: SINGLE ROW (SEE FIG 1 & TABLE 1) (USE TSM-XX-S BODY FOR BOTTOM INSULATOR) +.000 0.00 MAX= C + .150 (NO OF POS x .100 2.54 ) - .015 0.38 (USE WTSM-50-SV FOR TOP INSULATOR) .000 0.00 MIN (NO OF POS -1) x .100 2.54 C + .150 3.81 ) -A .025 0.64 SQ .050 1.27 REF (TYP) .100 2.54 WTSM-50-SV .100 2.54 REF C T-1S6-XX-XX-2 WRTSM-50-DVU.008 0.20 BOARD OPTION REF (.250 6.35 MIN) (SEE TABLE 1) +5 (MAX = + .150 3.81 ) 90 -0 C .100 2.54 REF .006 0.15 TSM-50-SV .050 1.27 RTSM-50-DVU -S: SINGLE ROW PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATOR: LCP, UL 94 V0, COLOR: BLACK HW BOARD TO BOARD ASSEMBLY TERMINAL: PHOS BRONZE DWG. NO. HW-XX-XX-XX-X-XXXX-SM-X-XXX SHEET OF BY: G PURVIS 03/12/1993 1 3 F: DWG MISC MKTG HW-XX-XX-XX-X-XXXX-SM-X-XXX-MKT.SLDDRWREVISION BA +.000 0.00 -.005 0.13 OAL .045 1.14 .055 1.40 REF REF .100 2.54 .110 2.79 LC-05-TM (NO OF POS -2) x.100 2.54 LC-08-TM-02 FIG 2 -D: DOUBLE ROW -S: SINGLE ROW IN-PROCESS -LC: LOCKING CLIP (SAME AS FIG 1, DIFFERENT AS SHOWN) SEE TABLE 3 TSM-XX-SV-XX .063 1.59 REF SM-AH (NO OF POS -2) x.100 2.54 -S: SINGLE ROW STAKED ALIGNMENT PINS -D: DOUBLE ROW TSM-XX-SV-XX SEE TABLE 3 PROPRIETARY NOTE * * .040 1.02 REF THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, -D: DOUBLE ROW -S: SINGLE ROW MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, (NO OF POS -2) x.100 2.54 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE .062 1.57 .062 1.57 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY REF PHONE: 812-944-6733 FAX: 812-948-5047 REF MOLDED ALIGNMENT PINS OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING .045 1.14 REF HW BOARD TO BOARD ASSEMBLY .025 0.64 FIG 3 DWG. NO. -A: ALIGNMENT PIN REF (TYP) SHEET SCALE: 2:1 (SAME AS FIG 1, DIFFERENT AS SHOWN) SECTION HW-XX-XX-XX-X-XXXX-SM-X-XXX SECTION (2 POS USE 1 PER STRIP, 3-36 POS USE 2 PER STRIP) SCALE 4 : 1 SCALE 4 : 1 SHEET OF BY: G PURVIS 03/12/1993 2 3 F: DWG MISC MKTG HW-XX-XX-XX-X-XXXX-SM-X-XXX-MKT.SLDDRW