NOTES: DO NOT HW-XX-XX-XX-X-XXXX-SM-X-XXX C 1. REPRESENTS A CRITICAL DIMENSION. SCALE FROM 2. TUBE POSITIONS -05 THRU -36 ONLY POSITIONS -02 THIS PRINT THRU -04 TO BE LAYER PACKAGED. No OF POSITIONS OPTION 2 3. MAXIMUM CUT FLASH: .020 0.51 CUT FLASH TO BE POLARIZED POSITION -02 THRU -36 IN A NON-CRITICAL AREA LOCATED BETWEEN BODIES. SPECIFY OMITTED PIN LEAD STYLE OPTION 1 (SEE TABLE 1) -LC: LOCKING CLIP (SEE FIG 2, SHT 2) PLATING SPECIFICATION (-D: USE RTSM-50-DVU, USE LC-05-TM) (-S: USE TSM-50-SV BODY, USE LC-08-TM-02) 36 02 -T: MATTE TIN ON CONTACT AND TAIL. -A: ALIGNMENT PIN (SEE FIG 3, SHT 2) -S: 30 SELECTIVE GOLD IN CONTACT AREA, (-S: 3 POSITION USE TSM-03-SV-A, .195 4.95 MATTE TIN ON TAIL. MUST BE MOLDED TO POSITION) REF -G: 10 SELECTIVE GOLD IN CONTACT AREA, (4-50 POSITIONS USE TSM-XX-SV-XX, 3 SELECTIVE GOLD ON TAIL. 2 POSITIONS TO USE TSM-48-SV-04) 35 01 -L: 10 SELECTIVE GOLD IN CONTACT AREA, (-D: FOR MOLDED TO POSITION, 2 MAX SWAY MATTE TIN ON TAIL. USE RTSM-50-DVU-XX BODY, .100 2.54 REF (EITHER DIRECTION) -TL: 250 TIN/LEAD ON CONTACT AND TAIL. AVAILABLE ON POS -02 THRU -36) -H: 30 SELECTIVE GOLD IN CONTACT -S: SINGLE ROW (-D: FOR STAKED, USE RTSM-50-DVU BODY, AREA, 3 SELECTIVE GOLD ON TAIL. 3 POS MIN) -F: 3 SELECTIVE GOLD IN CONTACT AREA, -TR: TAPE & REEL 02 72 MATTE TIN ON TAIL. (27 MAX POSITIONS) -TM: MATTE TIN ON CONTACT AND TAIL. (MAX HEIGHT: .6875) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, .295 7.49 LEAVE BLANK FOR NO HOLD DOWN OPTION MATTE TIN ON TAIL. REF (-D: USE RTSM-50-DVU, CAN BE CUT -LM: 10 SELECTIVE GOLD IN CONTACT AREA, TO POSITION, SEE FIG 1) MATTE TIN ON TAIL. (-S: USE TSM-50-SV, CAN BE CUT -FM: 3 SELECTIVE GOLD IN CONTACT AREA, 01 71 TO POSITION, SEE FIG 1) MATTE TIN ON TAIL. 2 MAX SWAY .200 5.08 REF (EITHER DIRECTION) SURFACE MOUNT ROW OPTION -D: DOUBLE ROW FIG 1 (USE RTSM-50-DVU FOR BOTTOM INSULATOR) BOARD SPACE HW-XX-10-XX-X-675-SM SHOWN (USE WRTSM-50-DVU FOR TOP INSULATOR) = -XXX -S: SINGLE ROW (SEE FIG 1 & TABLE 1) (USE TSM-XX-S BODY FOR BOTTOM INSULATOR) +.000 0.00 MAX= C + .150 (NO OF POS x .100 2.54 ) (USE WTSM-50-SV FOR TOP INSULATOR) - .015 0.38 .000 0.00 MIN (NO OF POS -1) x .100 2.54 C + .150 3.81 ) -A .025 0.64 SQ .050 1.27 REF (TYP) .100 2.54 WTSM-50-SV .100 2.54 REF T-1S6-XX-XX-2 WRTSM-50-DVU.008 0.20 BOARD OPTION REF (.250 6.35 MIN) (SEE TABLE 1) +5 (MAX = + .150 3.81 ) 90 -0 .100 2.54 REF .006 0.15 TSM-50-SV .050 1.27 RTSM-50-DVU -S: SINGLE ROW UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 0.051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATOR: LCP, UL 94 V0, COLOR: BLACK HW BOARD TO BOARD ASSEMBLY TERMINAL: PHOS BRONZE DWG. NO. HW-XX-XX-XX-X-XXXX-SM-X-XXX BY: G PURVIS 03/12/1993 SHEET OF1 2 F: DWG MISC MKTG HW-XX-XX-XX-X-XXXX-SM-X-XXX-MKT.SLDDRWREVISION AS +.000 0.00 -.005 0.13 .045 1.14 .055 1.40 OAL REF REF .100 2.54 LC-05-TM (NO OF POS -2) x.100 2.54 LC-08-TM-02 .110 2.79 -D: DOUBLE ROW -S: SINGLE ROW FIG 2 -LC: LOCKING CLIP IN-PROCESS (SAME AS FIG 1, DIFFERENT AS SHOWN) SEE TABLE 3 TSM-XX-SV-XX -S: SINGLE ROW SM-AH (NO OF POS -2) x.100 2.54 .063 1.59 REF -D: DOUBLE ROW .047 1.19 REF FIG 4 FIG 3 PACKAGING VIEW -A: ALIGNMENT PIN (TUBE PLUG LOCATED AS SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) (2 POS USE 1 PER STRIP, 3-36 POS USE 2 PER STRIP) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING HW BOARD TO BOARD ASSEMBLY DWG. NO. SHEET SCALE: 2:1 HW-XX-XX-XX-X-XXXX-SM-X-XXX F: DWG MISC MKTG HW-XX-XX-XX-X-XXXX-SM-X-XXX-MKT.SLDDRW BY: G PURVIS 03/12/1993 SHEET OF2 2