IPS1-110-01-S-D Samtec

FLEXIBLE POWER SYSTEMS FEATURES & BENEFITS Board-to-board and discrete wire cable systems Power Mate system with polarized guide posts Mini Mate system with reliable Tiger Buy contacts Individually shrouded contacts Elevated stack heights Optional polarization Vertical and right-angle for parallel, perpendicular and coplanar applications Rugged metal or plastic latching systems Cable components and tooling available Selectively loading contacts achieves customer specific creepage and clearance requrements. KEY SPECIFICATIONS SERIES IPT1/IPS1 IPBT/IPBS HPM/HPW/HPF FWJ/HFWJ/FHP PITCH (2.54 mm) .100 (4.19 mm) .165 (5.08 mm) .200 (3.96 mm) .156 CCC (1 PIN)* 5.9 A 10.3 A /pin (2 pins powered) 16.6 A 13.1 A CCC (2 PINS)* 4.8 A 8.4 A/pin (4 pins powered) 14.4 A 11.2 A CCC (3 PINS)* 4.1 A 7.6 A/pin (6 pins powered) 13.2 A 10.3 A CREEPAGE (2.54 mm) .100 (4.27 mm) .168 (3.94 mm) .155 (3.92 mm) .154 CLEARANCE (1.91 mm) .075 (3.05 mm) .120 (3.94 mm) .155 (2.82 mm) .111 VAC 775 400 850 600 VDC 1095 565 1200 845 CYCLES 1000 (MFG Tested) 100 100 100 F-221 samtec.com/minimate or samtec.com/powermate Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.(2.54 mm) .100 PITCH SHROUDED POWER CONNECTOR SET NO. PINS PLATING TAIL 1 LEAD STYLE D OTHER OPTIONS IPT1 - - - - - - PER ROW OPTION OPTION Requires -01 Specify LEAD 05 L A Lead Style STYLE from = 10 (0.25 m) = Alignment Pin (Leave blank for chart Gold on contact, (VS only) (N/A with LC) 10 Through-hole) Matte Tin on tail LC 15 RA = Locking Clip = Right-angle (Manual placement required) 20 (VS only) (N/A with A) VS 25 = Surface Mount K (Standard Sizes) = (6.00 mm) .236 DIA Polyimide film Pick & Place Pad (VS only) TR = Tape & Reel (VS only) FR No. of positions x (2.54) .100 = Full Reel Tape & Reel + (0.51) .020 (7.16) IPT1 (must order max. quantity .282 per reel contact Samtec Board Mates: for quantity breaks) (5.08) IPS1 A (-VS only) .200 LEAD MATED Through-hole Surface Mount A B -VS STYLE HEIGHT 01 (11.05) .435 (6.35) .250 (2.16) .085 -01-VS (13.59) .535 (6.35) .250 N/A 02 (14.00) .551 (9.30) .366 (2.64) .104 A 03 (16.00) .630 (11.30) .445 (2.16) .085 04 (17.00) .669 (12.30) .484 (2.69) .106 B 05 (19.00) .748 (14.30) .563 (2.46) .097 -RA 06 (20.00) .787 (15.30) .602 (2.35) .093 07 (25.00) .984 (20.30) .799 (2.31) .091 08 (30.00) 1.181 (25.30) .996 (2.39) .094 09 (35.00) 1.378 (30.30) 1.193 (2.46) .097 NO. PINS PLATING TAIL OTHER OPTIONS IPS1 1 01 D - PER ROW - - OPTION - - OPTION - Leave blank for 05 L LC Through-hole = 10 (0.25 m) = Locking Clip (Manual Gold on contact, placement required) 10 RA Matte Tin on tail (VS only) = Right-angle 15 K VS 20 = (5.50 mm) .217 DIA = Surface Mount Polyimide film No. of positions x (2.54) .100 Pick & Place Pad + (0.38) .015 25 (VS only) (Standard Sizes) (4.95) TR .195 = Tape & Reel IPS1 (VS only) Board Mates: Through-hole Surface Mount IPT1 FR = Full Reel Tape & Reel (7.87) (must order max. quantity .310 per reel contact Samtec for quantity breaks) (-VS only) (8.51) .335 -VS Note: -RA Some lengths, styles and options are non-standard, View complete specifications at: samtec.com IPT1 & samtec.com IPS1 non-returnable. F-221 samtec.com/minimate Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.