(2.00 mm) .0787 PITCH CABLE ASSEMBLY/COMPONENTS PINS WIRE PLATING ASSEMBLED END END 2 SERIES - - - - - - PER ROW GAUGE OPTION LENGTH OPTIONS OPTIONS (Only available with S2SD 05, 07, 10, 24 L XX.XX S D, DR & DS) = Double Row = 10 = Wire Length in = Single End 15, 20, 25, 30 PVC Cable 24C (0.25 m) Inches (69.85 mm) (Standard sizes) NUS = Color Gold on 02.75 min. D = Notch up, straight Coded contact S2SDT = Double End (Pin 1 to Pin N-1) Cable = Double Row (S2SD only) Blue *Teflon Specify S for single ended NDS Cable and D for double ended. 26 = Notch down, straight (24, 28, 30 (Pin 1 to Pin 2) Gauge only) (X)R 28 = Retention Latch NUX (SR mates with T2M-WT) 30 = Notch up, crossed (Pin 1 to Pin N) S2SD(T) (X)S = Screw Down Board Mates: No. of positions x NDX (10 positions minimum) (2.00) .0787 + (3.50) .138 T2M = Notch down, crossed (mates with T2M-DS) (Pin 1 to Pin 1) 24C CABLE SPECIFICATIONS COLOR CODING (7.52) .296 PIN COLOR Insulator Material: Black LCP 1 BROWN (5.15) Contact Material: .203 2 RED BeCu 3 ORANGE Plating: 4 YELLOW Au over 50 (1.27 m) Ni Wire: 5 GREEN (11.38) *DuPont Teflon is a 24, 26, 28 or 30 AWG .448 6 VIOLET Assembly registered trademark of the Operating Temp Range: Length 7 GRAY E.I. du Pont de Nemours -10 C to +105 C (PVC) (3.18) .125 and Company or its affiliates. -40 C to +125 C (*Teflon ) 8 WHITE Current Rating 9 BLACK (S2SD-24/T2M): Notes: 10 BLUE 3.8 A per pin Teflon cable is intended ETC REPEAT (2 pins powered) for crimp only. Contact Voltage Rating: Samtec for solderable cable 250 VAC applications. For wiring option information View complete specifications at: samtec.com S2SD and samtec.com S2SDT refer to drawings on web. POSITIONS ROW LATCH WIRE ISD2 SERIES 01 L - PER ROW - OPTION - OPTION - GAUGE - - 05, 07, 10, 15, D M CC81L 2426 L = Double = Metal = Contact, Loose = 24 to 26 AWG = 10 (0.25 m) 20, 25, 30 Row Retention Gold on contact (Standard sizes) Latch CC81R 2830 = Contact, = 28 to 30 AWG S Full Reel = Screw (17,000 Parts Down per Reel) (2.00) (2.03) .079 (2.07) .081 .080 DIA (3.68) (2.64) .145 .104 (1.78) (12.35) .070 .486 (3.17) .125 M S TOOLING Hand Tool: CAT-HT-281-2430-13 Mini Applicator: CAT-MC-281-2426-XX-01 (24-26 AWG) Extraction Tool: CAT-EX-169-01 Mini Applicator: CAT-MC-281-2830-XX-01 (28-30 AWG) Note: Some lengths, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com ISD2, samtec.com CC81R & samtec.com CC81L F-221 samtec.com/2mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 79531-3000 FCN- 360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-010-10-002000 801-43-002-10-013000 801-43-006-10-002000 801-93-011-10-001000