LTMM-1XX-XX-XX-D-XX-XX NOTES: REVISION AV C 1. REPRESENTS A CRITICAL DIMENSION. POLARIZED OPTION 2. MAXIMUM PIN ROTATION: 2. No OF POSITIONS DO NOT 3. MINIMUM PUSHOUT FORCE: 1 LB. -02 THRU -25 XX INDICATES POS TO BE OMMITTED SCALE FROM 4. NOTE DELETED. TERMINAL STYLE THIS PRINT 5. MINIMUM RETENTION FOR LOCKING CLIPS: 12 OZ. OPTION 6. MUST BE MEASURED AT BEND. -01: .100 2.54 POST HEIGHT (STANDARD) LEAVE BLANK FOR THROUGH HOLE 7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE -02: .120 3.05 POST HEIGHT (SEE FIG 1 & TABLE 1) NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (SEE TABLE 1) -RA: RIGHT ANGLE AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL (SEE FIG 2, SHT 2 & TABLE 1) PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. PLATING SPECIFICATION -SM: SURFACE MOUNT -G: 20 SELECTIVE GOLD IN CONTACT AREA, (SEE FIG 3, SHT 3 & TABLE 1) 3 SELECTIVE GOLD ON TAIL -LC: LOCKING CLIP (SEE NOTE 7) -T: MATTE TIN CONTACT AND TAIL (USE LC-05-TM FOR TH STYLE, (NO OF POS X .07874 2.0000 + .0938 2.383 )REF -S: 30 SELECTIVE GOLD IN CONTACT AREA, SEE FIG 1) MATTE TIN ON TAIL (USE LC-07-TM FOR -SM STYLE, -L: 10 SELECTIVE GOLD IN CONTACT AREA, SEE FIG 3, SHT 3) (NO OF POS X .07874 2.0000 + .0238 .605 )REF MATTE TIN ON TAIL (NOT AVAILABLE FOR -RA STYLE) -F: 3 SELECTIVE GOLD IN CONTACT AREA, -P: PICK & PLACE PAD MATTE TIN ON TAIL (USE PPP-24, SEE FIG 4, SHT 2) .020 0.51 .07874 2.0000 REF -H: 30 SELECTIVE GOLD IN CONTACT AREA, (-SM OPTION ONLY) REF 3 SELECTIVE GOLD ON TAIL (ONLY AVAILABLE IN 04-25 POSITIONS) 02 04 -SM: 30 SELECTIVE GOLD IN CONTACT AREA, -M: METAL PICK AND PLACE PAD MATTE TIN ON TAIL (USE MPP-07, SEE FIG 5, SHT 2) -TM: MATTE TIN ON ENTIRE PIN (-SM OPTION ONLY) -LM: 10 SELECTIVE GOLD IN CONTACT AREA, -K: POLYIMIDE FILM .07874 2.0000 C MATTE TIN ON TAIL (USE K-DOT-.295-.406-.005) L REF -FM: 3 SELECTIVE GOLD IN CONTACT AREA, (SEE FIG 6, SHT 3) MATTE TIN ON TAIL (-SM OPTION ONLY) -TR: TAPE AND REEL 01 03 (SEE FIG 7, SHT 4) C L (-SM OPTION ONLY) .1774 4.506 REF ROW SPECIFICATION (NO OF POS - 1) X .07874 2.00 REF -D: DOUBLE (USE LTMM-XX-D-LC) .2374 6.030 REF .140 3.56 REF 2 MAX SWAY FIRST POSITION 2 MAX SWAY ONLY FOR POS PIN A (EITHER DIRECTION) INDICATOR (EITHER DIRECTION) -05 THRU -25 CONTACT AREA C .125 3.18 REF .190 4.83 REF .075 1.91 .015 0.38 REF LC-05-TM .020 0.50 SQ .010 0.25 REF REF (TYP) 2 MAX SWAY .056 1.42 REF (EITHER DIRECTION) 2 MAX SWAY (EITHER DIRECTION) (NO OF POS X .07874 2.0000 + .0598 1.519 ) .003 0.76 FIG 1 SECTION THROUGH HOLE LTMM-112-02-XX-D-LC SHOWN PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE DECIMALS ANGLES OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail: info SAMTEC.com code: 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: INSULATOR: LCP, COLOR: BLACK LTMM ASSEMBLY TERMINAL: PHOSPHER BRONZE DWG. NO. LTMM-1XX-XX-XX-D-XX-XX BY: BRYAN T 05/28/1992 SHEET OF1 4 c: enterprisevault DWG MISC MKTG LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW.07874 2.0000 REF REVISION AV 2 MAX SWAY C (EITHER DIRECTION) 02 04 PIN A .090 2.29 REF 01 03 PIN B CONTACT AREA 902 IN-PROCESS -RA C .060 1.53 C .0787.0050 1.9990.127 PIN A PIN B SECTION FIG 2 RIGHT ANGLE LTMM-108-01-XX-D-RA SHOWN NOTE: = USED MEASURED DIMENSION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) = -.250 6.35 ) /2 .020 0.51 REF .250 6.35 REF .360 9.14 REF MPP-07 REF .237 6.03 REF .325 8.26 REF .050 1.27 REF PPP-24 FIG 5 -M: METAL PICK AND PLACE PAD LTMM-108-01-XX-D-SM-LC-M SHOWN FOR SURFACE MOUNT OPTIONS ONLY .240 6.10 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3) PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, C INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE L OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY FIG 4 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS -P: PICK AND PLACE PAD WRITTEN CONSENT OF SAMTEC, INC. e-Mail: info SAMTEC.com code: 55322 LTMM-108-01-XX-D-SM-LC-P SHOWN DESCRIPTION: NOTE: = USED MEASURED DIMENSION DO NOT SCALE DRAWING LTMM ASSEMBLY FOR SURFACE MOUNT OPTIONS ONLY = -.325 8.26 ) /2 .020 .51 (ONLY AVAILABLE IN 04-25 POSITIONS) DWG. NO. SHEET SCALE: 3:1 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3) LTMM-1XX-XX-XX-D-XX-XX c: enterprisevault DWG MISC MKTG LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW BY: BRYAN T 05/28/1992 SHEET OF2 4