LTMM-1XX-XX-XX-D-XX-XX
NOTES: AO
REVISION AO
C
1. REPRESENTS A CRITICAL DIMENSION.
No OF POSITIONS POLARIZED OPTION
2. MAXIMUM PIN ROTATION: 2.
XX INDICATES POS TO BE OMMITTED
3. MINIMUM PUSHOUT FORCE: 1 LB. -02 THRU -25
4. NOTE DELETED.
TERMINAL STYLE
DO NOT 5. MINIMUM RETENTION FOR LOCKING CLIPS: 12 OZ. OPTION
SCALE FROM 6. MUST BE MEASURED AT BEND. -01: .100[2.54] POST HEIGHT (STANDARD)
LEAVE BLANK FOR THROUGH HOLE
7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE
THIS PRINT -02: .120[3.05] POST HEIGHT
(SEE FIG 1 & TABLE 1)
NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (SEE TABLE 1)
-RA: RIGHT ANGLE
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
AO
(SEE FIG 2, SHT 2 & TABLE 1)
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
PLATING SPECIFICATION
-SM: SURFACE MOUNT
-G: 20" SELECTIVE GOLD IN CONTACT AREA, (SEE FIG 3, SHT 3 & TABLE 1)
AO
3" SELECTIVE GOLD ON TAIL -LC: LOCKING CLIP (SEE NOTE 7)
-T: MATTE TIN CONTACT AND TAIL (USE LC-05-TM FOR TH STYLE,
(NO OF POS X .07874[2.0000] + .0938[2.383])REF
-S: 30" SELECTIVE GOLD IN CONTACT AREA, SEE FIG 1)
MATTE TIN ON TAIL (USE LC-07-TM FOR -SM STYLE,
-L: 15" SELECTIVE GOLD IN CONTACT AREA, SEE FIG 3, SHT 3)
(NO OF POS X .07874[2.0000] + .0238[.605])REF
MATTE TIN ON TAIL (NOT AVAILABLE FOR -RA STYLE)
-F: 3" SELECTIVE GOLD IN CONTACT AREA,
-P: PICK & PLACE PAD
MATTE TIN ON TAIL (USE PPP-24, SEE FIG 4, SHT 2)
.07874 2.0000 REF
.020 0.51
-H: 30" SELECTIVE GOLD IN CONTACT AREA, (-SM OPTION ONLY)
REF
3" SELECTIVE GOLD ON TAIL -M: METAL PICK AND PLACE PAD
02 04
-SM: 30" SELECTIVE GOLD IN CONTACT AREA, (USE MPP-07, SEE FIG 5, SHT 2)
MATTE TIN ON TAIL (-SM OPTION ONLY)
-TM: MATTE TIN ON ENTIRE PIN -K: POLYAMIDE FILM
.07874 2.0000 -LM: 15" SELECTIVE GOLD IN CONTACT AREA, (SEE FIG 6, SHT 3)
C
L
MATTE TIN ON TAIL (-SM OPTION ONLY)
REF
-FM: 3" SELECTIVE GOLD IN CONTACT AREA,
-TR: TAPE AND REEL
MATTE TIN ON TAIL (SEE FIG 7, SHT 4)
(-SM OPTION ONLY)
01 03
C
L
.1774 4.506
ROW SPECIFICATION
REF -D: DOUBLE (USE LTMM-XX-D-LC)
(NO OF POS - 1) X .07874[2.00] REF
.2374 6.030
REF
.140 3.56 REF
2 MAX SWAY
FIRST POSITION ONLY FOR POS 2 MAX SWAY
PIN A
(EITHER DIRECTION)
INDICATOR
(EITHER DIRECTION)
-05 THRU -25
CONTACT AREA
C
.125 3.18 REF
.190 4.83
REF
.075 1.91
.015 0.38 REF LC-05-TM
.020 0.50 SQ
.010 0.25 REF
REF (TYP)
2 MAX SWAY
.056 1.42 REF
(EITHER DIRECTION)
2 MAX SWAY
(EITHER DIRECTION)
(NO OF POS X .07874[2.0000] + .0598[1.519]) .003[0.76]
FIG 1
SECTION
THROUGH HOLE
LTMM-112-02-XX-D-LC SHOWN
UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE
AO
DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
TOLERANCES ARE:
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
.XX: .01 [.3] 2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PURPOSE OTHER THAN THAT WHICH IT WAS
.XXX: .005 [.13]
PHONE: 812-944-6733 FAX: 812-948-5047
OBTAINED WITHOUT THE EXPRESSED WRITTEN
.XXXX: .0020 [.051]
CONSENT OF SAMTEC, INC.
e-Mail: info@SAMTEC.com code: 55322
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION:
LTMM ASSEMBLY
INSULATOR: LCP, COLOR: BLACK
TERMINAL: PHOSPHER BRONZE
DWG. NO.
LTMM-1XX-XX-XX-D-XX-XX
BY: BRYAN T 05/28/1992 SHEET OF1 4
F:\DWG\MISC\MKTG\LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW.07874 2.0000 REF
REVISION AO
2 MAX SWAY
C
(EITHER DIRECTION)
02 04
.090 2.29 REF
PIN A
01 03
PIN B
CONTACT AREA
902
IN-PROCESS
-RA
C
.060 1.52
C
.0787.0050 2.0000.127
PIN A
PIN B
SECTION
FIG 2
RIGHT ANGLE
LTMM-108-01-XX-D-RA SHOWN
NOTE: = USED MEASURED DIMENSION
AO
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
= {-.250 [6.35]) /2} .020 [0.51] REF
AO
.250 6.35 REF
.360 9.14 REF
MPP-07 REF
.237 6.03
REF
.325 8.26 REF .050 1.27
REF
PPP-24
FIG 5
-M: METAL PICK AND PLACE PAD
LTMM-108-01-XX-D-SM-LC-M SHOWN
FOR SURFACE MOUNT OPTIONS ONLY
.240 6.10
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
C
L
DISCLOSED TO OTHERS OR USED FOR ANY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PURPOSE OTHER THAN THAT WHICH IT WAS
PHONE: 812-944-6733 FAX: 812-948-5047
OBTAINED WITHOUT THE EXPRESSED WRITTEN
FIG 4
e-Mail: info@SAMTEC.com code: 55322
CONSENT OF SAMTEC, INC.
-P: PICK AND PLACE PAD
DESCRIPTION:
NOTE: = USED MEASURED DIMENSION
LTMM-108-01-XX-D-SM-LC-P SHOWN DO NOT SCALE DRAWING
= {-.325 [8.26]) /2} .020 [.51] LTMM ASSEMBLY
FOR SURFACE MOUNT OPTIONS ONLY
DWG. NO.
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)
SHEET SCALE: 3:1
LTMM-1XX-XX-XX-D-XX-XX
F:\DWG\MISC\MKTG\LTMM-1XX-XX-XX-D-XX-XX-MKT.SLDDRW BY: BRYAN T 05/28/1992 SHEET OF2 4