F-219
MEC112002FDA
MEC113002FDA
MEC114002LD
(1.00 mm) .0394" MEC1 SERIES
MINI EDGE CARD SOCKET
Mates with
Mates with:
(1.60 mm)
SPECIFICATIONS
(1.60 mm) .062" card
.062" card
For complete specifications and
recommended PCB layouts see
APPLICATION
www.samtec.com?MEC1
Insulator Material:
Black LCP
Contact Material:
BeCu
Plating:
Sn or Au over 50
(1.27 m) Ni
Operating Temp Range:
-55 C to +125 C
Current Rating:
2.2 A per pin
(2 adjacent pins powered)
Voltage Rating:
300 VAC
Insertion Depth:
(5.84 mm) .230" to
HIGH-SPEED CHANNEL PERFORMANCE
Optional
(8.13 mm) .320"
Alignment pin
RoHS Compliant:
MEC1
Yes
Rating based on Samtec reference channel.
For full SI performance data visit Samtec.com
14
PROCESSING
or contact SIG@samtec.com
Gbps
LeadFree Solderable:
Yes
SMT Lead Coplanarity:
PLATING OTHER
POSITIONS
(0.10 mm) .004" max (05-20)
1
MEC1 02 D NP
OPTION OPTION
PER ROW
(0.15 mm) .006" max (30-70)*
*(.004" stencil solution
may be available; contact
IPG@samtec.com)
A
RECOGNITIONS
= Alignment
F NP
Pin metal or
For complete scope of
05, 08, 20, 30, 40, 50, 60, 70
= Gold flash on contact, = No
recognitions see plastic at
www.samtec.com/quality Matte tin on tail Polarization
Samtec
(05, 08, 20 &
discretion.
30 positions
L
FILE NO. E111594
only)
= 10 (0.25 m)
K
Gold on contact,
= (7.87 mm)
Leave
Matte Tin on tail
.310" DIA
Blank for
ALSO AVAILABLE
Polyimide film
polarization
(MOQ Required)
Pick &
Place Pad
Locking Clip
(Manual placement required) POLARIZED
POSITIONS
(No. of Positions + 2) x
POSITIONS
TR
Other platings
PER ROW
(1.00) .03937 + (2.54) .100
(No Contact)
= Tape & Reel
02 140
3, 4
05
(05-60 only)
(6.99) 08 5, 6
.275
20 15, 16
30 21, 22
01 139 (1.83)
(0.36)
.072
Important Note: 40 31, 32
(1.00)
.014
Samtec recommends that
.03937 41, 42
50
pads on the mating board be
(No. of Positions + 2)
60 31, 32, 63 & 64
Gold plated.
x (1.00) .03937
70 53, 54, 115 & 116
Notes:
(8.89) (9.04) (0.15)
(1.40)
While optimized for
.350 .356 .006
.055
50 W applications, this
connector with alternative
(0.89)
signal/ground patterns may
.035
(8.51)
also perform well in certain
DIA
.335
75 W applications.
A
Some sizes, styles and OPTION
options are non-standard,
non-returnable.
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtecs specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Standard Card Edge Connectors category:
Click to view products by Samtec manufacturer:
Other Similar products are found below :
6565204-6 PKC-156 1437274-4 147889-1 1489165-4 EBT156-12B1X EBT15622B2X EBT156-22R2W 1-582587-1 1-582589-1 2-
6437275-9 284-0102-12100 306022901000000 307-012-502-202 307-024-526-201 307-056-520-300 307-080-526-208 1926088-2 245-062-
520-350 287-0032-12101 306-010-500-112 306-028-525-102 306-240-318 307-036-502-202 307-036-521-301 307-072-526-202 345-060-
559-303 368-004-520-201 392-008-559-201 534671-1 5-530501-5 341-240-317 345-029-520-300 345-030-500-301 345-044-500-300 345-
220-058 346-240-318 387-012-523-300 395-044-520-300 395-100-524-300 50-12B-10 50-6SN-5 09-07-2032 10035388-106LF 10035388-
802LF 10115859-011LF 10122859-009LF 101269333204245CLF 10127905-B04B24BLF 530555-1