F-219 MEC112002FDA MEC113002FDA MEC114002LD (1.00 mm) .0394 MEC1 SERIES MINI EDGE CARD SOCKET Mates with Mates with: (1.60 mm) SPECIFICATIONS (1.60 mm) .062 card .062 card For complete specifications and recommended PCB layouts see APPLICATION www.samtec.com MEC1 Insulator Material: Black LCP Contact Material: BeCu Plating: Sn or Au over 50 (1.27 m) Ni Operating Temp Range: -55 C to +125 C Current Rating: 2.2 A per pin (2 adjacent pins powered) Voltage Rating: 300 VAC Insertion Depth: (5.84 mm) .230 to HIGH-SPEED CHANNEL PERFORMANCE Optional (8.13 mm) .320 Alignment pin RoHS Compliant: MEC1 Yes Rating based on Samtec reference channel. For full SI performance data visit Samtec.com 14 PROCESSING or contact SIG samtec.com Gbps LeadFree Solderable: Yes SMT Lead Coplanarity: PLATING OTHER POSITIONS (0.10 mm) .004 max (05-20) 1 MEC1 02 D NP OPTION OPTION PER ROW (0.15 mm) .006 max (30-70)* *(.004 stencil solution may be available contact IPG samtec.com) A RECOGNITIONS = Alignment F NP Pin metal or For complete scope of 05, 08, 20, 30, 40, 50, 60, 70 = Gold flash on contact, = No recognitions see plastic at www.samtec.com/quality Matte tin on tail Polarization Samtec (05, 08, 20 & discretion. 30 positions L FILE NO. E111594 only) = 10 (0.25 m) K Gold on contact, = (7.87 mm) Leave Matte Tin on tail .310 DIA Blank for ALSO AVAILABLE Polyimide film polarization (MOQ Required) Pick & Place Pad Locking Clip (Manual placement required) POLARIZED POSITIONS (No. of Positions + 2) x POSITIONS TR Other platings PER ROW (1.00) .03937 + (2.54) .100 (No Contact) = Tape & Reel 02 140 3, 4 05 (05-60 only) (6.99) 08 5, 6 .275 20 15, 16 30 21, 22 01 139 (1.83) (0.36) .072 Important Note: 40 31, 32 (1.00) .014 Samtec recommends that .03937 41, 42 50 pads on the mating board be (No. of Positions + 2) 60 31, 32, 63 & 64 Gold plated. x (1.00) .03937 70 53, 54, 115 & 116 Notes: (8.89) (9.04) (0.15) (1.40) While optimized for .350 .356 .006 .055 50 W applications, this connector with alternative (0.89) signal/ground patterns may .035 (8.51) also perform well in certain DIA .335 75 W applications. A Some sizes, styles and OPTION options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for PCI Express/PCI Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : UEX220-6U 0877159203 10039755-10110TLF 10039755-10211TLF 10025026-10003PLF 10125756-A41010LF 10125756-980000LF 1- 1871239-2 2170560-2 10082378-11003TLF 10125756-980000LF 1775861-2 10039755-10111TLF EB220-3U WD2M144WB2R300 10061913-120PLF 10108777-10002WLF GPCP146400111HR 10144667-112Y0LF 10144667-113Y0LF 205058-1001 GPCP446200120HR GPCP245400111HR 10082378-10000TLF 10082378-10001TLF 87715-9256 MDT580M03001 0877159107 205058-1003 MDT580M01001 10018783-11000MLF 10061913-103BLF 10145445-10003MLF PSASF2130311TR 10147430-113T0LF 10146070-113Y0LF MDT670M01005 10108777-10200MLF MDT420M01002 PSASF3130211TR PSASF4130051TR PSASM2130412TR PSASM2130391TR 10139595-111T0LF 10139595-110T0LF PSASF3130131TR 0745400501 7-1734774-7 10150900-052R2LF 3-1761465-1