MICRO EDGE CARD SYSTEMS 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm, 2.00 mm PITCH FEATURES & BENEFITS Up to 56 Gbps PAM4 PCI Express 4.0 (MEC5 Series) Solutions for .062 (1.60 mm), and .093 (2.36 mm) thick cards Choice of pitch: 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm, 2.00 mm Vertical, right-angle, edge mount Staggered press-fit tails Justification beam ensures (MEC8-VP) card and body are flushed Available in surface mount and through-hole (MEC5) KEY SPECIFICATIONS TOTAL INSULATOR CONTACT OPERATING CURRENT VOLTAGE LEAD-FREE SERIES PITCH POSITIONS MATERIAL MATERIAL TEMP RANGE RATING RATING SOLDERABLE MEC5 0.50 mm 60-200 Black LCP Phosphor Bronze -55 to +125 1.5 A (2 pins) 125 VAC Yes MEC6 0.635 mm 20-140 Black LCP Phosphor Bronze -55 to +125 2.4 A (2 pins) 195 VAC Yes MEC8 0.80 mm 20-140 Black LCP Phosphor Bronze -55 to +125 1.8 A (4 pins) 185 VAC Yes MEC1 1.00 mm 20-140 Black LCP Phosphor Bronze -55 to +125 2.2 A (2 pins) 250 VAC Yes MECF 1.27 mm 10-100 Black/Natural LCP BeCu -55 to +125 3.5 A (2 pins) 280 VAC Yes MEC2 2.00 mm 10-100 Black/Natural LCP BeCu -55 to +125 3.5 A (2 pins) 238 VAC Yes F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.(0.50 mm) .0197 PITCH MICRO EDGE CARD SOCKET POSITIONS PLATING TAIL WELD TAB OTHER 01 XR MEC5 - - - - - - - PER ROW OPTION OPTION OPTION OPTION Leave blank for -030, -040, -050, L DV W1 K Tray Packaging =10 (0.25 m) Vertical = Weld Tab = Polyimide Pick -060, -070, -080 Gold on contact, Through-hole & Place Pad (-RA & -DV) Matte Tin on tail (Required for RA (Required for TR -DV) Right-angle -DV option) = Tape & Reel -090, -100 (Not available (-DV only) in -RA) W2 FR = Weld Tab = Full Reel Surface Mount Tape & Reel (Not available (must order max. for -DV) quantity per reel contact Samtec for quantity breaks) No. of Positions x (0.50) .0197 + (10.38) .409 POSITIONS MEC5-DV A B C PER ROW A (17.10) (21.63) B Card Mates: 030 N/A No. of Positions x (0.50) .0197 + (10.38) .409 .673 .852 (1.60 mm) .062 (4.60) A (22.10) (26.63) .181 040 N/A thick card with .870 1.048 B standard board (29.60) (15.48) (34.13) (4.60) 050 tolerance 1.165 .609 1.344 .181 (5.85) (34.60) (17.98) (39.13) 060 .230 1.362 .708 1.541 (39.60) (20.48) (44.13) 070 (5.85) 1.559 .806 1.737 (10.25) .230 .404 (44.60) (22.98) (49.13) 080 1.756 .905 1.934 (49.60) (25.48) (54.13) (10.25) 090 1.953 1.003 2.131 .404 (54.60) (27.98) (59.13) C 100 2.150 1.102 2.328 Note: Polarization rib is not present on 030 & -040 positions C View complete specifications at: samtec.com MEC5-DV POSITIONS MEC5-RA A B C D PER ROW (23.38) (17.10) (18.16) Card Mates: 30 N/A .920 .673 .715 (1.60 mm) .062 (28.38) (22.10) (23.16) 40 N/A thick card with 1.117 .870 .912 standard board (35.88) (29.60) (15.44) (30.66) 50 tolerance 1.413 1.165 .608 1.207 (40.88) (34.60) (17.94) (35.66) 60 1.609 1.362 .706 1.404 (45.88) (39.60) (20.44) (40.66) 70 1.806 1.559 .805 1.601 (10.25) .404 (50.88) (44.60) (22.94) (45.66) 80 2.003 1.756 .903 1.798 Note: Polarization rib is not present on 030 & -040 positions A B C (10.25) .404 (11.38) D A .448 (13.53) .532 Note: Some sizes, styles and B options are non-standard, C View complete specifications at: samtec.com MEC5 -RA non-returnable. F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice. (11.38) D .448 (13.53) .532