RF-18 MH113MH1RPMH1RP0300 MH113MH1RP01BJ10300 MH113* SERIES MICRO HIGH FREQUENCY RF CABLES U.FL Type SPECIFICATIONS For complete specifications see Micro High Frequency RF, www.samtec.com MH113 MHF or SMA Bulkhead Outer Contact Material: Au plated Phosphor Bronze Center Contact Material: Au plated Phosphor Bronze (MHX) Au plated BeCu (SMA) Insulator Material: PBT (MHX) (1.13 mm) .045 PTFE (SMA) Diameter Cable Operating Temperature: -40 C to +90 C Voltage Rating: 170 V max Dielectric Withstanding MATING SOLUTIONS Voltage: 200 Vrms APPLICATION Micro RF PCB Frequency Range: connectors for 0~6 GHz Micro High Impedance: 2.4 mm Mating PCB 50 (2.5 mm MAX) Frequency RFs MH1RP connectors available RoHS Compliant: MH1RP end mates Yes with RSP-122811-01 1.4 mm 1.13 mm Cable: (Cycles: 30 max.) (1.55 mm MAX) Impedance: 50 Capacitance: 95 pF/meter END 1 END 2 OVERALL Max Attenuation MH113 CONNECTOR CONNECTOR LENGTH (cable only): 2 dB 1 GHz Conductor Size: 32 AWG, (1.13 mm) .045 dia. Conductor Material: Specify 0030 Silver Plated Copper Conductor Resistance: = 1.18 (30 mm) END OPTIONS 0.60 /meter max from chart Insulator Diameter: 0050 (0.66 mm) .026 = 1.97 (50 mm) Insulator Material: FEP Shield Material: Tinned Copper XXXX = OAL (millimeters) 0100 (2.69) Jacket Material: FEP = 3.94 (100 mm) .106 Jacket Diameter: DIA (1.13 mm) .045 dia (8.00) Bend Radius: 0150 .315 6.8 mm = 5.91 (150 mm) Hex. Jacket Temp Rating: -40 C to +90 C 0300 RoHS Compliant: Yes = 11.81 (300 mm) END OPTIONS ALSO AVAILABLE (MOQ Required) MH1RP = MHF1 Type Plug (3.9 (.1 m) Gold on Center Contact, Additional stripping and 1.9 (.05 m) Gold on Shell) tinning options 01BJ1 = SMA Straight Bulkhead Jack STRIPPED & TINNED Additional end connector (Dimensions in mm) combinations 01BJ2 = SMA Straight Bulkhead Jack, Reversed Polarity Overall lengths CALLOUT A B C 01SB1 = SMA Straight Jack, Sealed Bulkhead Contact Samtec. 01SR1 = SMA Straight Jack, Sealed Bulkhead, 303030 3.0 3.0 3.0 Reversed Polarity 303040 3.0 3.0 4.0 (30 (0.76 m) Gold on Center Contact, EXTRACTION 403030 4.0 3.0 3.0 Gold Flash on Shell) TOOL 403040 4.0 3.0 4.0 SING = Single Ended 404040 4.0 4.0 4.0 MH1RP = RSP-122893-01 (End 2 callout) Both center conductor and B braid shield are stripped, XXXXXX = A C Stripped & Tinned only the center conductor is tinned. (End 2 callout) * MH113 Series was previously RF113 Series Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Samtec manufacturer: Other Similar products are found below : ESQT-135-03-F-D-380 QTE-060-01-L-D-A MSAS-179-ZUGG-18 MTSW-103-07-F-S-240 BCS-116-L-S-TE ERF8-020-05.0-S-DV-K-TR ERF8-060-05.0-L-DV-K-TR IDMD-10-T-12.00-A-G-R SFML-115-01-S-D SFML-125-01-S-D LSHM-120-02.5-L-DV-A-N-K-TR ESQ-110- 14-G-D ESQT-125-03-F-D-310 SO-0515-01-01-02 FJH-50-D-12.00-4 CES-150-01-T-D QTE-040-04-L-D-A QTH-020-04-F-D-DP-A-K-TR QTH-060-01-F-D-A QTH-090-04-L-D-A TCSD-10-S-05.00-01-F-N TCSD-15-D-02.00-01-N TFM-115-02-L-DH TFM-120-12-S-D-LC TFML-140-02-S-D TLW-107-05-G-D BDL-136-T-E TSS-132-01-G-S TST-113-04-S-D-RA TSW-105-14-F-D MMS-110-01-H-DH HPF- 03-02-T-S DW-25-11-L-D-450 ERF8-020-01-L-D-RA-L-TR ERF8-040-05.0-L-DV-TR SL-120-T-10 SLM-115-01-S-D CLP-132-02-G-D TFC-125-02-F-D-A-K TSW-202-07-T-S ISDF-25-D-M IPT1-105-01-S-D-RA IPL1-125-01-S-D-RA ICO-422-L-GT HTSW-116-15-L-S-LL HTSW-103-08-L-S-RA ESQ-116-33-T-T ERM8-020-02.0-S-DV-TR TCSD-10-D-06.00-01-N TCSD-20-D-12.00-01-N