DO NOT
SCALE FROM
THIS PRINT
NOTES:
REVISION DH
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
1. REPRESENTS A CRITICAL DIMENSION.C
2. MINIMUM PUSHOUT FORCE: 2 LB. OPTION
3. FOR NON -LC & -A, USE 2TS-XX-D.
-TR: TAPE AND REEL
No OF POSITIONS
4. COPLANARITY TO INCLUDE INSULATOR.
(37 POSTION MAX)
5. MAX BURR ALLOWANCE: .002[0.05].
-02 THRU -50 (PER ROW)
(SEE SHT 5)
6. MAXIMUM CUT FLASH: .015[0.38]. (NO FLASH TO BE ON BOTTOM OF BODY).
7. -MT OPTION: PIN B TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY
OPTION
LEAD STYLE
-DH OPTION: PIN A TO BE FLUSH TO .003" ABOVE A LINE MADE BY THE BODY
-P: PICK & PLACE PAD
-01: .126 [3.20] POST
PIN B TO BE FLUSH TO .001" BELOW/.003" ABOVE A LINE MADE BY THE BODY
(USE PPP-13)
-SH OPTION: PIN A TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY. -02: .175 [4.45] POST
(2 POSITION MINIMUM)
8. ORIENTATE PINS TO REDUCE THE NUMBER OF BANDOLIER MARKS IN THE (SEE TABLE 2)
C
POST AREA. (SEE TABLE 4)
OPTION
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED. THE -LC
PLATING SPECIFICATION -XXX: POLARIZED POSITION
OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
-XXX SPECIFIES POSITION OMITTED
-H: 30" HEAVY GOLD IN CONTACT AREA, 3" ON TAIL
RECOMMENDS MANUAL PLACEMENTFOR ALL ASSEMBLIES WITH
(SEE POLARIZATION VIEW)
-S: 30" SELECTIVE GOLD IN CONTACT AREA,
THE -LC OPTION.
10. NOTE DELETED. MATTE IN ON TAIL
OPTION
(SEE NOTE 3)
-L: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA,
-LC: LOCKING CLIP (SEE NOTE 9)
MATTE TIN ON TAIL
(FOR -DH USE 2TS-XX-DH-LC-XX)
-F: 3" FLASH SELECTIVE GOLD IN CONTACT AREA,
(FOR -SH USE 2TS-XX-SH)
MATTE TIN ON TAIL
(NOT AVAILABLE WITH -A)
-T: MATTE TIN CONTACT AND TAIL
-A: ALIGNMENT PIN
-SM: 30" SELECTIVE GOLD IN CONTACT AREA,
(FOR -DH USE 2TS-XX-DH-A-XX)
MATTE TIN ON TAIL
(FOR -SH USE 2TS-XX-SH-A-XX)
-LM: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA,
(NOT AVAILABLE WITH -LC)
MATTE TIN ON TAIL
-K: POLYIMIDE FILM PAD (SEE FIG 14, SHT 6)
-FM: 3" FLASH SELECTIVE GOLD IN CONTACT AREA,
(3 POS. MIN)
MATTE TIN ON TAIL.
(USE K-DOT-.177-.281-.005)
-TM: MATTE TIN CONTACT AND TAIL
ROW OPTION
-SH: SINGLE (2TS-XX-SH-X-XX)
+.005 [0.13]
(NO. OF POS x .07874[2.0000])
-DH: DOUBLE (2TS-XX-DH-XX-XX)
- .010 [0.25]
-MT: MIXED TECHNOLOGY (2TS-XX-DH-XX-XX)
(NOT AVAILABLE WITH -LC, OR -A OPTIONS)
(NO OF POS - 1) x .07874[2.0000])
.003[0.08]
2 MAX SWAY
02
(EITHER DIRECTION)
.0787 2.000
.15748 4.0000
.055 1.40
REF
2TS-XX-DH-XX-XX 01
SEE NOTE 6
LC-06-TM
.0197 0.500 SQ
.11 2.8
(TYP) REF .245.010 6.220.254
SEE NOTE 5
(SEE TABLE 2)
0 3
C
.003 0.08 MAX
C
(SEE NOTE 7)
SEE TABLE 5
(SEE NOTE 4)
PROPRIETARY NOTE
* *
UNLESS OTHERWISE SPECIFIED,
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
TOLERANCES ARE:
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
.XX: .01 [.3] 5
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
SEE NOTE 5
.XXX: .005 [.13]
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
(NO. OF POS x .07874[2.0000]
.XXXX: .0020 [.051]
WRITTEN CONSENT OF SAMTEC, INC.
e-Mail info@SMATEC.com code 55322
- .15748[4.0000]) .003[0.08]
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION:
INSULATOR: LCP VECTRA; 2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
UL 94 V0;
DWG. NO.
COLOR: BLACK
TERMINAL: PHOS BRONZE
FIG 1 MMT-1XX-XX-XX-XX-XX-XXX-X-XX
MMT-108-01-X-DH-LC SHOWN
BY: DEAN P 12/12/2000 SHEET OF1 6
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRWREVISION DH
.07874 2.0000 REF
2TS-XX-SH-X 01
SEE NOTE 6
.043 1.09
REF
2 MAX SWAY
(EITHER DIRECTION)
.060 1.52 REF
(SEE TABLE 2, SHT 1)
.07874 2.000 REF
.11 2.8
.050.050 1.271.27 REF REF
(NO. OF POS x .07874[2.0000]
5
0
- .15748[4.0000]) .003[0.08]
C
C
.006[0.15]
(SEE NOTE 4)
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
PROPRIETARY NOTE
* *
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
e-Mail: info@SAMTEC.com code: 55322
WRITTEN CONSENT OF SAMTEC, INC.
FIG 2
DESCRIPTION:
DO NOT SCALE DRAWING
MMT-108-01-X-SH-A SHOWN
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
DWG. NO.
SHEET SCALE: 4:1
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
BY: DEAN P 12/12/2000 SHEET OF2 6