NOTES: REVISION AH MTMM-1XX-XX-XX-X-XXX-XX-XXX C 1. REPRESENTS A CRITICAL DIMENSION. 2. MAXIMUM ALLOWABLE BOW: 0.005 .13 IN/IN AFTER ASSEMBLY. OPTION No OF POSITIONS 3. MAXIMUM PIN ROTATION IN BODY: 2 POLARIZATION DO NOT -01 THRU -50 4. MINIMUM PUSHOUT FORCE: 1LB SPECIFY POS -XXX TO BE OMITTED SCALE FROM 5. CUT PARTS WITH METAL WASHERS TOWARDS OPERATOR ALLOWING TERMINAL SPEC THIS PRINT FLASH TO BE ON POST AWAY FROM CRITICAL AREA (METAL WASHERS). OPTION LEAD STYLE (SEE TABLE 1) 6. INSERT PINS SO THAT BANDOLIER MARKS ARE LIMITED IN THE POST C **-MW: METAL WASHER AREA (SEE TABLE 3). PLATING SPECIFICATION (-D & -Q BODY SPECS ONLY) (SEE FIG 4, SHT 2) -G: 20 SELECTIVE GOLD IN CONTACT AREA, (30 POS PER ROW MAX) 3 SELECTIVE GOLD ON TAIL. TAIL MUST BE .090 2.29 - .300 7.62 -T: MATTE TIN ON CONTACT AND TAIL. POST HEIGHT -S: 30 SELECTIVE GOLD IN CONTACT AREA, C +.0000 0.000 XXX = (SEE TABLE 1) MATTE TIN ON TAIL. (NO OF POS x .0787 2.000 ) -.0100 0.254 -L: 10 SELECTIVE GOLD IN CONTACT AREA, BODY SPECIFICATION MATTE TIN ON TAIL. -S: SINGLE (TMM-50-S, SEE FIG 1) -F: 3 SELECTIVE GOLD IN CONTACT AREA, REF C -D: DOUBLE (TMM-50-D, SEE FIG 2, SHT 2) MATTE TIN ON TAIL. (SEE TABLE 4) -Q: QUAD (TMM-50-Q, SEE FIG 3, SHT 2) -H: 30 SELECTIVE GOLD IN CONTACT AREA, 3 SELECTIVE GOLD ON TAIL. 02 01 -SM: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -TM: MATTE TIN ON CONTACT AND TAIL. -LM: 10 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -FM: 3 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL020 0.50 SQ REF (TYP) ** -MW OPTION, DO NOT DESIGN IN. SAMTEC WILL T-1S13-XX-XX-2 ONLY SUPPORT EXISTING BUSINESS 02/08/2002 C.005 0.124 (.0000 0.000 MIN) .0590 1.499 TAIL REF REF 2 MAX SWAY 2 MAX SWAY (EITHER DIRECTION) (EITHER DIRECTION) .0787 2.000 REF FIG 1 -S: SINGLE ROW OPTION MTMM-1XX-02-XX-S-100 SHOWN PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE DECIMALS ANGLES OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 .XXXX: .0020 0.051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: INSULATOR: LCP, UL 94 VO, COLOR: BLACK 2MM TERMINAL STRIP ASSEMBLY TERMINAL: PHOS BRONZE DWG. NO. MTMM-1XX-XX-XX-X-XXX-XX-XXX F: DWG MISC MKTG MTMM-1XX-XX-XX-X-XXX-XX-XXX-MKT.SLDDRW BY: REIDINGER 12/01/1993 SHEET OF1 204 REVISION AH 02 01 03 C REF 01 05 REF C (SEE TABLE 4, SHT 1) (SEE TABLE 4, SHT 1) .0787 2.000 REF .0787 2.000 REF (TYP) FIG 3 FIG 2 -Q: QUAD ROW OPTION -D: DOUBLE ROW OPTION MTMM-1XX-02-XX-Q-100 SHOWN MTMM-1XX-02-XX-D-100 SHOWN (SAME AS FIG 1, DIFFERENT AS SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) .090 2.29 A B IN PROCESS 1 SCALE 4:1 .005 0.13 MAX POST AREA .090 2.29 SQT-MW REF DETAIL B (SEE TABLE 1, SHT 4) SCALE 16 : 1 FIG 4 -MW: METAL WASHER OPTION .075 1.91 REF IN PROCESS 2 MTMM-1XX-02-XX-X-100-MW SHOWN (ONE PER POSITION) C BANDOLIER REF SCALE 4:1 (-D &-Q PODY SPEC ONLY, SEE NOTE 5) (SAME AS FIG 1, DIFFERENT AS SHOWN) TAIL AREA IN PROCESS 4 ** -MW OPTION, DO NOT DESIGN IN. SAMTEC WILL (-T PLATING ONLY) ONLY SUPPORT EXISTING BUSINESS 02/08/2002 (SEE NOTE 6 & TABLE 3) C +.0080 +0.203 .0590 1.499 -.0050 -0.127 PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND .0050 0.127 MAX PROPRIETARY INFORMATION AND ALL DESIGN, MEASURE AT TAIL MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, 2 MAX SWAY INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 (EITHER DIRECTION) OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 2MM TERMINAL STRIP ASSEMBLY IN PROCESS 3 SCALE 4:1 DWG. NO. SHEET SCALE: 3:1 REPRESS TO PROPER TAIL DIM DETAIL A .0050 0.127 MAX MTMM-1XX-XX-XX-X-XXX-XX-XXX SCALE 8 : 1 MEASURE AT TAIL F: DWG MISC MKTG MTMM-1XX-XX-XX-X-XXX-XX-XXX-MKT.SLDDRW BY: REIDINGER 12/01/1993 SHEET OF2 2