NOTES: REVISION AE MTMM-1XX-XX-XX-X-XXX-XX-XXX C 1. REPRESENTS A CRITICAL DIMENSION. 2. MAXIMUM ALLOWABLE BOW: 0.005 .13 IN/IN AFTER ASSEMBLY. OPTION No OF POSITIONS 3. MAXIMUM PIN ROTATION IN BODY: 2 POLARIZATION -01 THRU -50 4. MINIMUM PUSHOUT FORCE: 1LB SPECIFY POS -XXX TO BE OMITTED 5. CUT PARTS WITH METAL WASHERS TOWARDS OPERATOR ALLOWING TERMINAL SPEC FLASH TO BE ON POST AWAY FROM CRITICAL AREA (METAL WASHERS). OPTION LEAD STYLE (SEE TABLE 1) 6. INSERT PINS SO THAT BANDOLIER MARKS ARE LIMITED IN THE POST C **-MW: METAL WASHER AREA (SEE TABLE 3). PLATING SPECIFICATION (-D & -Q BODY SPECS ONLY) (SEE FIG 4, SHT 2) -G: 20 SELECTIVE GOLD IN CONTACT AREA, (30 POS PER ROW MAX) DO NOT 3 SELECTIVE GOLD ON TAIL. TAIL MUST BE .090 2.29 - .300 7.62 SCALE FROM -T: MATTE TIN ON CONTACT AND TAIL. POST HEIGHT THIS PRINT -S: 30 SELECTIVE GOLD IN CONTACT AREA, C +.0000 0.000 XXX = (SEE TABLE 1) MATTE TIN ON TAIL. (NO OF POS x .0787 2.000 ) -.0100 0.254 -L: 15 SELECTIVE GOLD IN CONTACT AREA, BODY SPECIFICATION MATTE TIN ON TAIL. -S: SINGLE (TMM-50-S, SEE FIG 1) -F: 3 SELECTIVE GOLD IN CONTACT AREA, -D: DOUBLE (TMM-50-D, SEE FIG 2, SHT 2) .0787 2.000 REF MATTE TIN ON TAIL. -Q: QUAD (TMM-50-Q, SEE FIG 3, SHT 2) -H: 30 SELECTIVE GOLD IN CONTACT AREA, 3 SELECTIVE GOLD ON TAIL. 02 01 -SM: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -TM: MATTE TIN ON CONTACT AND TAIL. -LM: 15 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -FM: 3 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL020 0.50 SQ REF (TYP) ** -MW OPTION, DO NOT DESIGN IN. SAMTEC WILL T-1S13-XX-XX-2 ONLY SUPPORT EXISTING BUSINESS 02/08/2002 C.005 0.124 (.0000 0.000 MIN) .0590 1.499 REF TAIL REF 2 MAX SWAY 2 MAX SWAY (EITHER DIRECTION) (EITHER DIRECTION) .0787 2.000 REF FIG 1 -S: SINGLE ROW OPTION MTMM-1XX-02-XX-S-100 SHOWN UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 0.051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: INSULATOR: LCP, UL 94 VO, COLOR: BLACK 2MM TERMINAL STRIP ASSEMBLY TERMINAL: PHOS BRONZE DWG. NO. MTMM-1XX-XX-XX-X-XXX-XX-XXX F: DWG MISC MKTG MTMM-1XX-XX-XX-X-XXX-XX-XXX-MKT.SLDDRW BY: REIDINGER 12/01/1993 SHEET OF1 204 REVISION AE 02 01 03 01 05 .1550 3.937 REF .3150 8.000 REF .0787 2.000 REF .0787 2.000 REF (TYP) FIG 2 FIG 3 -D: DOUBLE ROW OPTION -Q: QUAD ROW OPTION MTMM-1XX-02-XX-D-100 SHOWN MTMM-1XX-02-XX-Q-100 SHOWN (SAME AS FIG 1, DIFFERENT AS SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) .090 2.29 A B IN PROCESS 1 SCALE 4:1 .005 0.13 MAX POST AREA .090 2.29 SQT-MW REF DETAIL B (SEE TABLE 1, SHT 4) SCALE 16 : 1 FIG 4 -MW: METAL WASHER OPTION .075 1.91 REF IN PROCESS 2 MTMM-1XX-02-XX-X-100-MW SHOWN (ONE PER POSITION) C BANDOLIER REF SCALE 4:1 (-D &-Q PODY SPEC ONLY, SEE NOTE 5) (SAME AS FIG 1, DIFFERENT AS SHOWN) TAIL AREA IN PROCESS 4 ** -MW OPTION, DO NOT DESIGN IN. SAMTEC WILL (-T PLATING ONLY) ONLY SUPPORT EXISTING BUSINESS 02/08/2002 (SEE NOTE 6 & TABLE 3) AE C +.0080 +0.203 .0590 1.499 -.0050 -0.127 PROPRIETARY NOTE .0050 0.127 MAX THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO MEASURE AT TAIL SAMTEC, INC. AND SHALL NOT BE REPRODUCED 2 MAX SWAY OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 (EITHER DIRECTION) PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 2MM TERMINAL STRIP ASSEMBLY IN PROCESS 3 SCALE 4:1 DWG. NO. SHEET SCALE: 3:1 REPRESS TO PROPER TAIL DIM .0050 0.127 MAX DETAIL A MTMM-1XX-XX-XX-X-XXX-XX-XXX MEASURE AT TAIL SCALE 8 : 1 F: DWG MISC MKTG MTMM-1XX-XX-XX-X-XXX-XX-XXX-MKT.SLDDRW BY: REIDINGER 12/01/1993 SHEET OF2 2