MTSW-112-07-T-D-110-RA Samtec

MODIFIED .025 SQ POST HEADERS (2.54 mm) .100 PITCH MTSW/HMTSW SERIES MTSW/HMTSW PIN CENTERS NO. PINS PER ROW LEAD STYLE SERIES Board Mates: - - - - SSW, SSQ, ESW, ESQ, BCS, BSW CES, SLW, HLE, SSM Specify MTSW 1 01 thru 50 LEAD STYLE = Modified Strip = (2.54 mm) .100 Pitch = .100 (2.54 mm) Cable Mates: (All positions filled) Center Version from chart IDSD, IDSS HMTSW = Hi-Temp 2 02 thru 25 Modified Strip = (5.08 mm) .200 Pitch = .200 (5.08 mm) SPECIFICATIONS (Every other position filled) Center Version Insulator Material: MTSW: Black Glass Filled Polyester HMTSW: Natural Liquid Crystal Polymer Terminal Material: LEAD Phosphor Bronze A STYLE Plating: Au or Sn over 06 (7.62) .300 50 (1.27 m) Ni 07 (10.92) .430 Operating Temp Range: -55 C to +125 C with Gold 08 (13.46) .530 -55 C to +105 C with Tin 09 (18.54) .730 10 (21.08) .830 PROCESSING 11 (23.62) .930 12 (26.16) 1.030 LeadFree Solderable: MTSW: No, Lead Wave Only 13 (31.24) 1.230 HMTSW: Yes 21 (36.32) 1.430 22 (16.00) .630 23 (11.30) .445 24 (12.19) .480 27 (33.78) 1.330 (2.54) .100 x No. of Positions A 28 (28.70) 1.130 (2.54) (2.48) S .100 .098 C B A (5.08) (5.02) FOR B = (2.29) .090 D .200 .198 C LEAD C B MAXIMUM STYLE STRAIGHT 06 (2.79) .110 A 07 (6.10) .240 08 (8.64) .340 (7.62) (7.56) T 09 (13.72) .540 .300 .298 10 (16.26) .640 C B 11 (18.80) .740 12 (21.34) .840 A 13 (26.42) 1.040 21 (31.50) 1.240 (7.62) (7.56) Q 22 (11.18) .440 .300 .298 Straight Pin Versions 23 (6.48) .255 C B 24 (7.37) .290 HMTSW MTSW 27 (28.96) 1.140 Straight Pin Versions 28 (23.88) .940 Note: These Series are non-standard, non-returnable. F-221 samtec.com MTSW or samtec.com HMTSW Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.PLATING OPTION ROW OPTION POST HEIGHT OTHER OPTION POLARIZED OPTION - - - - - F S XXXX RA or RE XXX = Gold flash on post, = Single Row = C Dimension = Right-angle = Polarized Matte Tin on tail (Specify post height in (Specify XXX as position number) INCHES D LL .005 (0.13 mm) increments) L = Double Row = Locking Lead = 10 (0.25 m) (not available with RE, not available Gold on post, in single row 1 or 2 positions) T Matte Tin on tail (Available on tails from (2.29 mm) .090 = Triple Row to (10.16 mm) .400 only) G Q = 10 (0.25 m) LA = Double Row Gold on post, = RA option with LL Option .200 (5.08 mm) Gold flash on balance (Maximum C = (13.46 mm) .530 ) row space T = Matte Tin (2.54) .100 x No. of Positions C D (3.02) (3.09) S .119 .122 RX E D OPTION RA (1.52) .060 C RE (4.06) .160 (6.10) (5.56) D .240 .219 E C FOR E = (2.29) .090 MIN FOR RA & RE) C C LEAD MAXIMUM MAXIMUM STYLE (8.12) (8.10) with/RA with/RE T .320 .319 06 Not Available Not Available 07 (3.30) .130 Not Available 08 (5.84 .230 (3.30) .130 E 09 (10.92 .430 (8.38) .330 10 (13.46) .530 (10.92) .430 C 11 (16.00 .630 (13.46) .530 12 (18.54) .730 (16.00) .630 (23.62) .930 (21.08) .830 (8.12) (8.10) * 13 Q .320 .319 (28.70) 1.130 (26.16) 1.030 * 21 22 (8.38) .330 (5.84) .230 HMTSW MTSW * 23 (3.68) .145 E Not Available * 24 (4.57) .180 Right-Angle Versions (-RA Options) (26.16) 1.030 (23.62) .930 * 27 Right-Angle Versions (-RE Options) Single Row Only (21.08) .830 (18.54) .730 * 28 * Styles 21, 23, 24, 27 not available with D Right-angle (HMTSW S &D = 36 positions maximum) Styles 13, 21, 23, 24, 27, 28 not available with T or Q Right-angle F-221 samtec.com MTSW or samtec.com HMTSW Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.