PCIEC-098-0340-EC-EC-P Samtec

PCIEC0980151ECECCP F-219 (Rev 08NOV18) PCIe Gen 2 and Gen 3 protocol supported PCIEC0640151ECEMC (1.00 mm) .0394" PCIEC SERIES PCI EXPRESS JUMPERS 30 AWG insulated Mates with: ribbon cable SPECIFICATIONS PCIE, PCIE-LP For complete speci cations and Supports one, recommended PCB layouts see www.samtec.com?PCIEC four, eight and sixteen PCI CABLE Express links ASSEMBLY Cable: HIGH-SPEED CHANNEL PERFORMANCE Eye Speed 30 AWG twinax or Eye Speed 32 AWG twinax; PCIEC 30 AWG insulated ribbon Rating based on Samtec reference channel. Operating Temp: For full SI performance data visit Samtec.com 14 -25 C to +105 C or contact SIG@samtec.com Contact: Gbps Phosphor Bronze Plating: Au or Sn over 50 Ni Performance: APPLICATIONS Supports PCIe Gen 1 & 2 Bend Radius: (3.18 mm) .125" Loop back Extender (From one PCIe slot to another PCIe slot) 30 or 32 AWG -EM Connector: Ser-Des Physical Extender (From one PCIe slot to another PCIe Ser-Des) twinax ribbon cable Black Nylon Physical Extender for easy troubleshooting of PCIe card debug and analysis Card Insertion Depth: (PCIe slot to Emulator or Analyzer) (8.00 mm) .315" RoHS Compliant: Yes NO. OF WIRE CABLE END END PCIEC IMPEDANCE POSITIONS LENGTH OPTION NO. 1 NO. 2 Leave blank EC Specify XXXX for 100 = Edge = Wire Length CABLE EC 036 (x1), Card in millimeters OPTION = PCIe Edge Card 85 064 (x4), 0050 mm from = 85 minimum chart 098 (x8), EM = PCIe Edge 164 (x16) Mount Connector OAL = Wire Length + L IMPEDANCE CABLE OPTION 85 100 32 AWG NOT BLANK TAPED SHIELD AVAILABLE* 30 AWG C NOT TOOLED* (No Power Lines) TAPED SHIELD CP 30 AWG NOT TOOLED* (With Power Lines) TAPED SHIELD 32 AWG NOT P (With Power Lines) TAPED SHIELD AVAILABLE* B * Contact hdr@samtec.com for information A END TO END L (39.6) EC to EC 1.56 (49.6) EC to EM 1.95 Notes: PCI-SIG , PCI Express and the PCIe design marks are NO. OF A B registered trademarks and/or (1.57) POSITIONS service marks of PCI-SIG. .062 036 (x1) (20.30) .800 (25.40) 1.00 Wire Length = (1.27) .050 064 (x4) (34.30) 1.35 (39.40) 1.55 (8.71) Cable lengths longer than 40.00" (1 meter) are not .343 (51.30) 2.02 (56.40) 2.22 098 (x8) supported with S.I. test data. 164 (x16) (84.30) 3.32 (89.40) 3.52 (10.11) .398 This Series is non-standard, non-returnable. Due to technical progress, all designs, speci cations and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs speci cations. Customer speci c requirements must be approved by Samtec and identi ed in a Samtec customer-speci c drawing to apply.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for samtec manufacturer: Other Similar products are found below : TW-20-03-H-6-175-225 YTW-20-07-H-6-520-110 TW-10-08-H-D-616-107 TW-15-08-H-D-600-080 TW-30-08-H-D-616-107 MTMM-108- 05-H-D-220 MTMM-103-05-H-D-220 MTMM-120-06-H-D-180 SSQ-108-01-SM-S SSQ-105-01-SM-S ESQT-112-02-F-D-375 ESQT-135- 03-F-D-380 FTSH-111-01-L-DV QTE-060-01-L-D-A MSAS-179-ZUGG-18 MTMM-103-05-H-D-300 MTSW-103-07-F-S-240 MTSW-125- 24-H-D-285 BCS-116-L-S-TE ERF8-020-05.0-S-DV-K-TR IDMD-10-T-12.00-A-G-R IPL1-112-01-L-D-K IPL1-116-01-H-D SFML-115- 01-S-D SFML-125-01-S-D SFSDT-15-28-H-04.50-DR-NDS LSHM-120-02.5-L-DV-A-N-K-TR SMS-125-02-S-D ESQ-110-14-G-D ESQT- 125-03-F-D-310 ESQT-133-03-F-D-350 SO-0515-01-01-02 SQW-120-01-F-D-VS-A SSQ-110-02-H-D SSQ-111-01-G-S SSW-110-02-H-D FJH-50-D-12.00-4 FLE-125-01-G-DV-A CES-150-01-T-D QFS-052-01-SL-D-RA QTE-040-04-L-D-A QTH-020-04-F-D-DP-A-K-TR QTH- 060-01-F-D-A QTH-090-04-L-D-A TCSD-10-S-05.00-01-F-N TFM-110-02-S-D TFM-115-02-L-DH TFM-120-12-S-D-LC TFML-140-02-S- D TLW-107-05-G-D