F-219 PMSS0518K03.50DLUS PMSDT0224K03.50DLUS (4.19 mm) .165 PMSD, PMSDT, PMSS, PMSST SERIES PDOISWCRERET ME WATIERE C JAUBMLE APERS CSEAMBBLELY Mates with: Wire range SPECIFICATIONS IPBT from 16-24 For complete specifications Plastic latch AWG see www.samtec.com PMSD, www.samtec.com PMSDT, www.samtec.com PMSS or www.samtec.com PMSST Insulator Material: PMSD/IPBT Valox 457 WIRE CURRENT RATING Contact Material: GAUGE (PER PIN) Phosphor Bronze 16 AWG 10.3 A Plating: Sn over 50 18 AWG 8.8 A (1.27 m) Ni 22 AWG 5.7 A Operating Temp Range: 24 AWG 5.2 A -10 C to +105 C (PVC) -40 C to +105 C (*Teflon ) 2 PINS POWERED Single or Voltage Rating: Double end 22 & 24 AWG = Keyed option 300 VAC/424 VDC (PVC) polarization 16,18 & 20 AWG = 424 VAC/600 VDC (PVC) Individually 24 AWG = shrouded contacts 300 VAC/424 VDC (*Teflon ) Plastic latches Wire: 16 to 24 AWG RoHS Compliant: Yes *DuPont Teflon is a registered trademark of the WIRE ASSEMBLED END LATCH PINS TYPE E.I. du Pont de Nemours K GAUGE LENGTH OPTION OPTION PER ROW and Company or its affiliates. RECOGNITIONS 02, 16 For complete scope K XX.XX of recognitions see = Keyed = Wire S 03, 04, www.samtec.com/quality 18 PMSD Polarization Length = Single End 05,08, = Double Row in Inches 206 PVC Cable (88.90 mm) 10, 15* D (20 AWG/ FILE NO. E111594 03.50 min. (Standard sizes) = Double End 600 volts) PMSDT *Only (Latch required) COMPONENTS = Double Row available for 22 *Teflon Cable double row For body, see (4.19) (24 AWG only) www.samtec.com IPBD 24 .165 For contacts, see PMSS www.samtec.com CC69L = Single Row LUS www.samtec.com CC69R PVC Cable = Plastic Latch up, straight No. of Positions PMSST x (4.19) .165 ALSO AVAILABLE = Single Row + (1.02) .040 LDS *Teflon Cable (MOQ Required) = Plastic Latch down, 05 02 01 (24 AWG only) straight (5.41) (7.95) Color coded cables .213 .313 (*Teflon N/A) LUX* Other sizes/pin counts Assembled PMSS/PMSST = Plastic Latch up, Length 20 AWG/300 Volts (3.18) crossed .125 No. of Positions LDX* x (4.19) .165 = Plastic Latch down, + (1.02) .040 Notes: crossed (4.19) For wiring option information 05 02 01 .165 refer to drawing on web. *(PMSD/PMSDT only) (12.14) Teflon cable is intended for .478 crimp only. Contact Samtec for solderable cable applications. 10 06 Some lengths, styles and PMSD/PMSDT options are non-standard, DLUS non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for DC Power Cords category: Click to view products by Samtec manufacturer: Other Similar products are found below : H-IN-1 H-IN-12 1300000052 H-OU-32 H-OU-34 H-OU-7 H-OU-8 H-OU-9 H-PA-7 H-RC-2 H-SN-16 H-SN-21 172-4000 172-4101 172-7443-E 2J-1865A H-IN-13 H-IN-14 H-IN-4 H-IN-8 426055400-3 MN47A4BC01M010 H-OU-11 H-OU-12 H-OU-13 H-OU-14 H- OU-19 H-OU-2 H-OU-23 H-OU-24 H-OU-31 H-PA-5 H-PA-8 H-RC-1 H-SN-14 H-SN-22 32102-021500-200-RS 420680840-3 426451500-3 H-SN-18 H-OU-21 H-OU-10 1-832692-4 FJ-VSP 3M 1300000086 1300140079 96CB-POWER-B-1.8M2 520-092-R 426040200 H-OU-28