REVISION BH QSE-XXX-01-XXX-D-XXX OPTION No OF POSITIONS -A: ALIGNMENT PINS -020, -040, -060 (USE QSE-20-XX-D-XX-A) DO NOT *-080, *-100 (PER ROW) (NOT AVAILABLE WITH -LC OPTION) SCALE FROM -LC: LOCKING CLIPS(SEE NOTE 14) (*= SEE NOTE & 17) THIS PRINT (USE LC-08-TM-01, SEE FIG 2, SHT 2) (NOT AVAILABLE WITH -A OPTION) LEAD STYLE -GP: GUIDE POSTS (SEE FIG 4, SHT 3) (*= SEE NOTE 17) -01: .1280 3.251 (USE QSE-20-01-D-XX-X-GP) (T & R PACKAGING: 40 POS MAX) -K: POLYIMIDE FILM (*= SEE NOTE 17) PLATING SPECIFICATION (USE K-DOT-.325-.450-.005) C (SEE FIG 3, SHT 2) (SEE NOTES 8, 11 & 13) -TR: TAPE & REEL (60 POS MAX) -F: 3 SELECTIVE GOLD IN CONTACT REF (SEE FIG 8, SHT 5) AREA, MATTE TIN ON TAIL (40 POS MAX -GP OPTION) (USE C-126-21-F, T-1G2-01-F) .7875 20.003 (TYP) -FL: FRICTION LOCKS (SEE NOTE 8) (SEE FIG 5, SHT 3) -L: 10 SELECTIVE GOLD IN CONTACT (NOT AVAILABLE WITH -GP) 19 EQ. SPCS AREA, MATTE TIN ON TAIL -RT1: RETENTION OPTION .285 7.24 (USE C-126-21-L, T-1G2-01-L) .0315 0.800 (MUST USE -A OPTION) -H: 30 GOLD IN CONTACT AREA, REF (USE QSE-20-01-D-XX-A-RT1 & =.599 15.20 3 GOLD ON TAIL SUB-SC-05-01-FF) (USE C-126-21-H, T-1G2-01-G) 02 (TYP) (SEE FIG 6, SHT 4) .150 3.81 -C: 50 ELECTRO POLISHED SELECTIVE (NOT AVAILABLE WITH -LC, -GP, OR -FL) GOLD IN CONTACT AREA, (NOT AVAILABLE WITH -100 POS) REF MATTE TIN ON TAIL -L: LATCHING OPTION (40 POS MAX) .245 6.22 (USE C-126-21-C, T-1G2-01-L) (SEE FIG 7, SHT 4) -STL: 30 SELECTIVE GOLD IN CONTACT (MUST USE -A OPTION) REF AREA, TIN LEAD (90/10 5%) ON TAIL (NOT AVAILABLE WITH -LC, -GP, -FL, (USE C-126-21-STL, T-1G2-01-STL) OR -RT1) -FTL: 3 SELECTIVE GOLD INCONTACT 01 AREA, TIN LEAD (90/10 5%) ON TAIL .6250 15.875 (USE C-126-21-FTL, T-1G2-01-FTL) .0975 2.477 REF -LTL: 10 SELECTIVE GOLD IN CONTACT .0060 0.152 REF AREA, TIN LEAD (90/10 5%) ON TAIL REF ROW SPECIFICATION (USE C-126-21-LTL, T-1G2-01-LTL) -D: DOUBLE -S: 30 SELECTIVE GOLD IN CONTACT .0225 0.571 (USE QSE-20-XX-D-XX) AREA, MATTE TIN ON TAIL REF (USE C-126-21-S, T-1G2-01-L) No OF BANKS QSE-20-01-D-XX-A SEE NOTE 15 .017.005 0.430.13 .120 3.05 .038 0.95 .725 18.42 (SEE NOTE 16) REF REF REF .0030 0.076 REF REF C +.0030 +0.076 .1280 3.251 +.004 +0.10 -.0010 -0.025 .167 4.24 -.002 -0.05 (SEE NOTE 6 & 7) T-1G2-01-XXX C .105 2.67 REF C SEE TABLE 1 L C .064 1.62 REF NOTES: .295 7.491 .035 0.89 REF C 1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM CONTACT RETENTION: 8 OZ .007 0.18 REF 3. MINIMUM GROUND PLANE RETENTION: 8 OZ C-126-21-XXX 4. PARTS ARE MOLDED TO POSITION. (SEE NOTE 13) 5. DELETED. FIG 1 6. MAXIMUM VARIANCE: .002 0.51 . SECTION 7. DIMENSION APPLIES TO CONTACTS & GROUND PLANE. -A: ALIGNMENT PIN OPTION 8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING, -G PLATED GROUND (QSE-060-01-XXX-D-A SHOWN) PLANE CAN BE SUBSTITUTED FOR -F PLATED GROUND PLANE. 9. GROUND PLANE PRESS HEIGHT MUST BE .003 0.08 LESS THAN THE MAX HEIGHT UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE OR .001 0.03 GREATER THAN THE MINIMUM HEIGHT OF THE SOCKETS. DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO 10. MINIMUM SUB-SC-05-01-XX RETENTION: 1 LB IN BODY. TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED 11. MAY SUB C-126-01-XXX FOR C-126-21-XXX. DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR 12. NOTE DELETED. DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS 13. FOR -080, -100 POSITIONS USE C-269-11-XXX. DO NOT SUB C-126XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 14. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 IS NOT COMPATIBLE WITH AUTO PLACEMENT.SAMTEC RECOMMENDS MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1.5:1 DESCRIPTION: MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. INSULATOR: LCP, UL94V-0 COLOR: BLACK .8mm DOUBLE ROW HS SOCKET ASSEMBLY 15. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTROL BOW. CONTACT: PHOS BRONZE DWG. NO. 16. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS. GROUND PLANE: PHOS BRONZE 17. AVAILABLE FOR EXISTING CUSTOMERS ONLY. QSE-XXX-01-XXX-D-XXX BY: ERIC M 05/20/1999 SHEET OF1 5 F: DWG MISC MKTG QSE-XXX-01-XXX-D-XXX-MKT.SLDDRWREVISION BH QSE-20-01-D-XX .0375 0.953 .055 1.40 LC-08-TM-01 .010 0.25 REF .056 1.42 REF.003 0.08 (SEE TABLE 2, SHT 1) FIG 2 -LC: LOCKING CLIP OPTION (QSE-060-01-XXX-D-LC SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (*= SEE NOTE 17) REF .020.010 0.510.25.020 0.51 .133 3.38 .325 8.26 FIG 3 -K: POLYIMIDE FILM PAD (K-DOT-.325-.450-.005) F: DWG MISC MKTG QSE-XXX-01-XXX-D-XXX-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .8mm DOUBLE ROW HS SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 2:1 QSE-XXX-01-XXX-D-XXX BY: ERIC M 05/20/1999 SHEET OF2 5