REVISION AU QSS-XXX-XX-XXX-D-XXX No OF POSITIONS OPTION -A: ALIGNMENT PINS -025, -050, -075, DO NOT (USE QSS-25-XX-D-XX-A) *-100, *-125 SCALE FROM C (NOT AVAILABLE WITH -LC) THIS PRINT REF -LC: LOCKING CLIPS (SEE NOTE 12) *SEE NOTES 11 & 14 (USE LC-08-TM-01, SEE FIG 2, SHT 2) LEAD STYLE (NOT AVAILABLE WITH -A) .7875 20.003 (TYP) .2850 7.239 -K: POLYIMIDE FILM PAD -01: .1430 3.632 02 REF (USE K-DOT-.325-.450-.005) (SEE FIG 3, SHT 2) PLATING SPECIFICATION -TR: TAPE & REEL (75 POS MAX) .2450 6.223 (SEE NOTES 8 & 11) .144 3.66 REF (50 POS MAX FOR -GP) -F: 3 FLASH SELECTIVE GOLD IN REF -GP: GUIDE POSTS CONTACT AREA, MATTE TIN ON TAIL (USE QSS-25-01-D-XX-X-GP) (USE C-126-21-F & T-1G2-01-F) (SEE FIG 4, SHT 3) 01 (SEE NOTE 8) .006 0.15 REF (NOT AVAILABLE WITH -LS2) .6250 15.875 -L: 10 LIGHT SELECTIVE GOLD, IN .0275 0.699 -LS2: LOCKING SCREW CONTACT AREA, MATTE TIN ON TAIL REF REF (USE QSS-25-01-D-XX-LS2) (USE C-126-21-L & T-1G2-01-L) 24 EQ SPCS (SEE FIG 5, SHT 3) -H: 30 HEAVY GOLD IN CONTACT (NOT AVAILABLE WITH -GP) .0250 0.635 AREA, 3 GOLD ON TAIL (FOR MATING WITH =.600 15.24 (USE C-126-21-H & T-1G2-01-G) QTS-...-RA-..LS2) -C: 50 HEAVY GOLD IN CONTACT QSS-25-01-D-XX-A AREA, MATTE TIN ON TAIL .135 3.43 ROW SPECIFICATION (USE C-126-21-C & T-1G2-01-L) REF -D: DOUBLE (USE QSS-25-XX-D-XX) -STL: 30 HEAVY SELECTIVE GOLD IN .0375 0.953 CONTACT AREA, TIN LEAD ON TAIL REF No OF BANKS (USE C-126-21-STL & T-1G2-01-STL) -FTL: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, TIN LEAD ON TAIL .7250 18.415 REF (USE C-126-21-FTL & T-1G2-01-FTL) REF C .0030 0.076 REF .017.005 0.440.13 +.003 +0.08 (SEE NOTE 13) .1430 3.632 T-1G2-01-XXX -.001 -0.03 +.004 +0.102 .167 4.24 (SEE NOTE 6, 7, & 9) -.002 -0.051 C C SEE TABLE 1 .105 2.65 REF (SEE NOTE 7 & 9) C .035 0.89 REF .295 7.49 C-126-21-XXX .070 1.765 REF .0070 0.178 REF SECTION SCALE 3 : 1 NOTES: FIG 1 -A: ALIGNMENT PIN OPTION 1. MINIMUM CONTACT RETENTION: 6 OZ (QSS-075-01-XXX-D-A SHOWN) 2. MINIMUM GROUND PLANE RETENTION: 8 OZ C 3. REPRESENTS A CRITICAL DIMENSION. 4. PARTS ARE MOLD TO POSITION. 5. NOTE DELETED. 6. MAXIMUM VARIANCE OF .002 0.05 . * = SEE NOTES 11 & 14 * = SEE NOTES 11 & 14 7. DIMENSION APPLIES TO CONTACTS AND GROUND PLANES, INDEPENDENT OF PROPRIETARY NOTE * * GROUND PLANES AND CONTACTS RESPECTIVELY. UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES MM 8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: 9. GROUND PLANE PRESS HEIGHT MUST BE .003 0.08 LESS THAN THE MAX HEIGHT AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES OR .001 0.03 GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS. INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 10. NOTE DELETED. REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS 11. FOR -100 AND -125 POSITIONS USE C-269-11-X, DO NOT SUB C-126-01-XXXXX: .0020.051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1.5:1 DESCRIPTION: IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS INSULATOR: LCP, UL94V-0 COLOR: BLACK .635mm DOUBLE ROW HS SOCKET ASSEMBLY MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION. CONTACT: PHOS BRONZE 13. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS. DWG. NO. GROUND PLANE: PHOS BRONZE 14. AVAILABLE FOR EXISTING CUSTOMERS ONLY. QSS-XXX-XX-XXX-D-XXX BY: DEAN P 6/28/1999 SHEET OF1 3 F: DWG MISC MKTG QSS-XXX-XX-XXX-D-XXX-MKT.SLDDRWREVISION AU QSS-25-XXX-D-XX .0375 0.953 C .055 1.40 .056 1.42 REF LC-08-TM-01 .010 0.25 REF.003 0.08 (SEE TABLE 2, SHT 1) FIG 2 -LC: LOCKING CLIP OPTION (QSS-075-01-XXX-D-LC SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) REF C.020 0.51 .020.010 0.510.25 C .1480 3.759 .325 8.26 FIG 3 -K: POLYIMIDE FILM PAD (USE K-DOT-.325-.450-.005) * = SEE NOTES 11 & 14 PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING .635mm DOUBLE ROW HS SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 2:1 QSS-XXX-XX-XXX-D-XXX F: DWG MISC MKTG QSS-XXX-XX-XXX-D-XXX-MKT.SLDDRW BY: DEAN P 6/28/1999 SHEET OF2 3