REVISION CE QTE-XXX-XX-XXX-D-XXX No OF POSITIONS OPTION -020, -040, -060, -A: ALIGNMENT PINS *-080, *-100 -LC: LOCKING CLIPS(SEE NOTE 12) (PER ROW) (USE LC-08-TM-01) * = (SEE NOTE 11 & 14) DO NOT (SEE FIG 2, SHT 2) LEAD STYLE SCALE FROM -K: POLYIMIDE FILM -01: .1680 4.267 THIS PRINT (USE K-DOT-.276-.375-.005, SEE FIG 3, SHT 2) -02: .2861 7.267 (N/A ON STYLE -07 & -08) -03: .4042 10.267 -TR: TAPE & REEL (SEE FIG 13, SHT 7) -04: .6010 15.265 (60 POS. MAX) * = (SEE NOTE 11 & 14) -05: .7190 18.263 (40 POS. MAX FOR -GP OPTION) -06: .8370 21.260 (N/A ON STYLE -05, -06, -07, & -08) * = (SEE NOTE 11 & 14) -07: .9540 24.231 -GP: GUIDE POSTS (SEE FIG 4, SHT 3) -08: 1.1510 29.260 (AVAILABLE ON -01 ONLY) REF -09: .5220 13.258 .2350 5.969 (USE QTE-20-01-D-XX-GP) -10: .5606 14.239 .7875 20.003 (T & R PACK: 40 POS. MAX.) REF PLATING SPECIFICATION -SD: SCREW DOWN (SEE FIG 5, SHT 3) (TYP) 01 (AVAILABLE ON -01 ONLY) -F: 3 FLASH GOLD IN CONTACT AREA, (USE QTE-20-01-D-XX-SD) MATTE TIN ON TAIL -FL: FRICTION LOCKS (SEE FIG 9, SHT 5) (USE T-1SXX-XX-F, T-1G1-XX-F) (SEE NOTE 07) .155 3.94 REF (ONLY AVAILABLE ON -01 & -02) -L: 10 LIGHT GOLD IN CONTACT AREA, (SEE NOTE 13) MATTE TIN ON TAIL (NOT AVAILABLE WITH -GP, -SD) (USE T-1SXX-XX-L, T-1G1-XX-L) -RT1: RETENTION OPTION (SEE FIG 11, SHT 6) 02 -H: 30 HEAVY GOLD IN CONTACT AREA, (ONLY AVAILABLE ON -01 LEAD STYLE) .6450 16.383 3 GOLD ON TAIL .033 0.84 (MUST USE -A OPTION) REF (USE T-1SXX-XX-H, T-1G1-XX-G) (USE QTE-20-01-D-XX-A-RT1 & T-1R36-01-F) REF -C: 50 ELECTRO-POLISHED SELECTIVE IN 19 EQ SPCS (NOT AVAILABLE WITH -LC, -GP, -SD, OR -FL) .0080 0.203 REF CONTACT AREA, MATTE TIN ON TAIL .0315 0.800 (NOT AVAILABLE ON -100 POS) (USE T-1SXX-XX-C, T-1G1-XX-L) -L: LATCHING OPTION (40 POS. MAX.) =.599 15.20 -STL: 30 HEAVY SELECTIVE GOLD IN (SEE FIG 12, SHT 6) (MUST USE -A OPTION) CONTACT AREA, TIN LEAD ON TAIL (TYP) (USE T-1SXX-XX-STL, T-1G1-XX-STL) (AVAILABLE ON -01 ONLY) QTE-20-XX-D-XX-A -FTL: 3 FLASH SELECTIVE GOLD IN (NOT AVAILABLE WITH -LC, -GP, -SD, -FL, CONTACT AREA, TIN LEAD ON TAIL OR -RT1) (USE T-1SXX-XX-FTL, T-1G1-XX-FTL) .036 0.91 REF ROW SPECIFICATION REF -D: DOUBLE (USE QTE-20-XX-D-XX & QTEH-20-XX-D-XX) .7450 18.923 T-1G1-XX-XXX No OF BANKS REF REF .155.005 3.9370.127 T-1SXX-XX-XXX (SEE NOTE 13) (SEE TABLE 1) .080 2.03 REF SEE TABLE 2 +.003 0.08 .035 0.90 REF 0.03 .035 0.89 REF -.001 (SEE NOTE 9) NOTES: .280 7.11 FIG 1 C 1. REPRESENTS A CRITICAL DIMENSION015 0.38 REF -A: ALIGNMENT PIN OPTION 2. MINIMUM TERMINAL RETENTION: 8 OZ. (QTE-060-01-XXX-D-A SHOWN) 3. MINIMUM GROUND PLANE RETENTION: 1 LB. SECTION (STYLE -01, -02 & -03 ONLY) 4. PARTS TO BE MOLDED TO POSITION. 5. MAXIMUM VARIANCE OF .002 0.05 . 6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE. 7. T-1SXX-XX-L CAN BE SUBSTITUTED FOR T-1SXX-XX-F. UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION 8. NOTE DELETED. CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED 9. GROUND PLANE PRESS HEIGHT MUST BE .003 0.08 LESS THAN THE MAX HEIGHT DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR OR .001 0.03 GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS. DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS 10. T-1R36 RETENTION TO BODY TO BE 1.0 LBFXXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 0.051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC INTERCONNECT PROCESSING GROUP. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1.5:1 DESCRIPTION: 12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION IS .8mm DOUBLE ROW HS TERMINAL ASSEMBLY INSULATOR: LCP, UL94V-0 COLOR: BLACK NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL TERMINAL: PHOS BRONZE DWG. NO. PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION. GROUND PLANE: PHOS BRONZE 13. PIN CAN EXTEND PAST WALL .003 0.08 MAX. QTE-XXX-XX-XXX-D-XXX 14. AVAILABLE FOR EXISTING CUSTOMERS ONLY. BY: DEAN P 09-14-2010 SHEET OF1 7 F: DWG MISC MKTG QTE-XXX-XX-XXX-D-XXX-MKT.SLDDRWREVISION CE QTE-20-XX-D-XX .055 1.40 LC-08-TM-01 .056 1.42 REF .010 0.25 REF .0800 2.032.003 0.08 (SEE TABLE 3, SHT 1) FIG 2 -LC: LOCKING CLIP OPTION (QTE-060-01-XXX-D-LC SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) * = (SEE NOTE 11 & 14) REF .021.010 0.520.25.020 0.51 .276 7.010 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED FIG 3 OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY -K: POLYIMIDE FILM PAD 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 (USE K-DOT-.276-.375-.005) OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .8mm DOUBLE ROW HS TERMINAL ASSEMBLY DWG. NO. SHEET SCALE: 2:1 QTE-XXX-XX-XXX-D-XXX F: DWG MISC MKTG QTE-XXX-XX-XXX-D-XXX-MKT.SLDDRW BY: DEAN P 09-14-2010 SHEET OF2 7