QTS-XXX-XX-XXX-D-XXX
REVISION AG
No OF POSITIONS OPTION
-025, -050, -075,
-LC: LOCKING CLIPS (SEE NOTE 10 AND NOTE 15)
DO NOT
**-100, **-125
(USE LC-08-TM-01)
SCALE FROM
(PER ROW)
-A: ALIGNMENT PINS (SEE NOTE 10)
THIS PRINT
** (SEE NOTE 17)
(USE QTS-25-XX-D-XX-A)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.276-.375-.005, SEE FIG 3, SHT 2)
LEAD STYLE
-GP: GUIDE POST, (SEE FIG 4, SHT 2)
(AVAILABLE ON STYLE -01 ONLY)
-01: .1680[4.267]
-TR: TAPE & REEL (75 POS MAX)
-02: .2861[7.264]
** = SEE NOTE 17
(N/A ON STYLE -05 & -06)
-03: .4043[10.269]
** = SEE NOTE 17
-04: .6001[15.246]
C
* -05: .7181[18.240] REF
ROW SPECIFICATION
* -06: .8361[21.237]
-D: DOUBLE (USE QTS-25-XX-D-XX
& QTSH-25-XX-D-XX )
.7875 20.003
SEE NOTE 13
(TYP)
01
No OF BANKS
PLATING SPECIFICATION
-F: 3" FLASH SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
.155 3.94 REF .235 5.97 = SEE SHEET 3
(USE T-1SXX-XX-F & T-1G1-XX-F)(SEE NOTE 11)
(SEE NOTE 16) REF
* = NOT TOOLED
-L: 10" LIGHT SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
02
(USE T-1SXX-XX-L & T-1G1-XX-L)
-H: 30" HEAVY GOLD IN CONTACT AREA,
.639 16.24 REF
.0325 0.826 REF
3" GOLD ON TAIL
24 EQ SPACES
(USE T-1SXX-XX-H & T-1G1-XX-G)
@ .0250[0.635]
-C: 50" HEAVY GOLD IN CONTACT AREA,
.0080 0.203 REF
=.600[15.24]
MATTE TIN ON TAIL
(USE T-1SXX-XX-C & T-1G1-XX-L)
(TYP)
-STL: 30" HEAVY SELECTIVE GOLD IN
QTS-25-XX-D-XX-A
CONTACT AREA, TIN LEAD ON TAIL
(USE T-1SXX-XX-STL & T-1G1-XX-STL)
-FTL: 3" FLASH SELECTIVE GOLD IN
.0375 0.953
CONTACT AREA, TIN LEAD ON TAIL REF
REF
(USE T-1SXX-XX-FTL & T-1G1-XX-FTL)
R
T-1G1-XX-XXX
.7450 18.923 REF
.155.005 3.940.127
(SEE NOTE 16) REF
.003[.08]
C
.080 2.03 .001[.03]
T-1S56-XX-XXX
(SEE NOTE 8, 9 & 12)
REF
C
SEE TABLE 2
(SEE NOTE 9 & 12)
NOTES:
.035 0.90 REF
.035 0.89 REF
C
1. REPRESENTS A CRITICAL DIMENSION.
2. DELETED. .015 0.38 REF
3. DELETED.
.280 7.11
FIG 1
4. MINIMUM TERMINAL RETENTION: 6 OZ.
-A: ALIGNMENT PIN OPTION
5. MINIMUM GROUND PLANE RETENTION: 1 LB.
(QTS-075-01-XXX-D-A SHOWN)
6. DELETED.
SECTION
7. PARTS TO BE MOLDED TO POSITION.
8. MAXIMUM VARIANCE OF .002[0.05].
9. DIMENSION APPLIES TO TERMINALS AND GROUND PLANES INDEPENDENT OF
THE GROUND PLANE OR TERMINAL RESPECTIVELY.
PROPRIETARY NOTE
* *
10. LEAD STYLES -03 AND -05: TOP BODY (QTS) CANNOT HAVE -A OPTION AND
UNLESS OTHERWISE SPECIFIED,
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
-04 AND -06 CAN USE EITHER -A OR -LC BODY.
DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
11. T-1SXX-XX-L CAN BE SUBSTITUTED FOR T-1SXX-XX-F. MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
TOLERANCES ARE:
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
12. GROUND PLANE PRESS HEIGHT MUST BE .003[.08] LESS THAN THE MAX DECIMALS ANGLES
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
.XX: .01[.3] 2
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
13. WINDOW NOT PRESENT ON LEAD STYLES -02 THRU -06 HEIGHT
.XXX: .005[.13] REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
PER REV. E OF THE QTS-25-XX-D-XX-X-XX. .XXXX: .0020[.051]
e-Mail: info@SAMTEC.com code: 55322
WRITTEN CONSENT OF SAMTEC, INC.
14. NOTE DELETED.
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING DESCRIPTION:
15. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC
OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC H.635mm DOUBLE ROW HS TERMINAL ASSEMBLY
INSULATOR: LCP, UL94V-0; COLOR: BLACK
RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION.
TERMINAL: PHOS BRONZE
DWG. NO.
16. PIN CAN EXTEND PAST WALL .003[0.08] MAX.
GROUND PLANE: PHOS BRONZE
17. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
QTS-XXX-XX-XXX-D-XXX
18. DELETED.
BY: DEAN P 09-14-2010 SHEET OF1 3
F:\DWG\MISC\MKTG\QTS-XXX-XX-XXX-D-XXX-MKT.SLDDRWREVISION AG
QTS-25-XX-D-XX
.055 1.40
LC-08-TM-01
.056 1.42 REF
.010 0.25 REF.003[0.08]
.0800 2.032
(SEE TABLE 6, SHT 1)
FIG 2
-LC: LOCKING CLIP OPTION
(QTS-075-01-XXX-D-LC SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) REF
.020.020 0.5080.50.020[0.50]
(SEE TABLE 3)
FIG 3
-K: POLYIMIDE FILM PAD
.2760 7.010
(USE K-DOT-.276-.375-.005)REFREF
** = SEE NOTE 17
.125 3.18
.206 5.24 REF
REF
.3230 8.204
** = SEE NOTE 17
REF
PROPRIETARY NOTE
* *
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
.055 1.40 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
QTS-25-01-D-XX-X-GP
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REF REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
e-Mail: info@SAMTEC.com code: 55322
WRITTEN CONSENT OF SAMTEC, INC.
DESCRIPTION:
FIG 4
DO NOT SCALE DRAWING
-GP: GUIDE POST OPTION H.635mm DOUBLE ROW HS TERMINAL ASSEMBLY
(QTS-075-01-XXX-D-GP SHOWN)
DWG. NO.
SHEET SCALE: 2:1
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
QTS-XXX-XX-XXX-D-XXX
(AVAILABLE ON STYLE -01 ONLY)
F:\DWG\MISC\MKTG\QTS-XXX-XX-XXX-D-XXX-MKT.SLDDRW
BY: DEAN P 09-14-2010 SHEET OF2 3