QTS-XXX-XX-XXX-D-XXX REVISION AG No OF POSITIONS OPTION -025, -050, -075, -LC: LOCKING CLIPS (SEE NOTE 10 AND NOTE 15) DO NOT **-100, **-125 (USE LC-08-TM-01) SCALE FROM (PER ROW) -A: ALIGNMENT PINS (SEE NOTE 10) THIS PRINT ** (SEE NOTE 17) (USE QTS-25-XX-D-XX-A) -K: POLYIMIDE FILM PAD (USE K-DOT-.276-.375-.005, SEE FIG 3, SHT 2) LEAD STYLE -GP: GUIDE POST, (SEE FIG 4, SHT 2) (AVAILABLE ON STYLE -01 ONLY) -01: .1680 4.267 -TR: TAPE & REEL (75 POS MAX) -02: .2861 7.264 ** = SEE NOTE 17 (N/A ON STYLE -05 & -06) -03: .4043 10.269 ** = SEE NOTE 17 -04: .6001 15.246 C * -05: .7181 18.240 REF ROW SPECIFICATION * -06: .8361 21.237 -D: DOUBLE (USE QTS-25-XX-D-XX & QTSH-25-XX-D-XX ) .7875 20.003 SEE NOTE 13 (TYP) 01 No OF BANKS PLATING SPECIFICATION -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL .155 3.94 REF .235 5.97 = SEE SHEET 3 (USE T-1SXX-XX-F & T-1G1-XX-F)(SEE NOTE 11) (SEE NOTE 16) REF * = NOT TOOLED -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL 02 (USE T-1SXX-XX-L & T-1G1-XX-L) -H: 30 HEAVY GOLD IN CONTACT AREA, .639 16.24 REF .0325 0.826 REF 3 GOLD ON TAIL 24 EQ SPACES (USE T-1SXX-XX-H & T-1G1-XX-G) .0250 0.635 -C: 50 HEAVY GOLD IN CONTACT AREA, .0080 0.203 REF =.600 15.24 MATTE TIN ON TAIL (USE T-1SXX-XX-C & T-1G1-XX-L) (TYP) -STL: 30 HEAVY SELECTIVE GOLD IN QTS-25-XX-D-XX-A CONTACT AREA, TIN LEAD ON TAIL (USE T-1SXX-XX-STL & T-1G1-XX-STL) -FTL: 3 FLASH SELECTIVE GOLD IN .0375 0.953 CONTACT AREA, TIN LEAD ON TAIL REF REF (USE T-1SXX-XX-FTL & T-1G1-XX-FTL) R T-1G1-XX-XXX .7450 18.923 REF .155.005 3.940.127 (SEE NOTE 16) REF .003 .08 C .080 2.03 .001 .03 T-1S56-XX-XXX (SEE NOTE 8, 9 & 12) REF C SEE TABLE 2 (SEE NOTE 9 & 12) NOTES: .035 0.90 REF .035 0.89 REF C 1. REPRESENTS A CRITICAL DIMENSION. 2. DELETED015 0.38 REF 3. DELETED280 7.11 FIG 1 4. MINIMUM TERMINAL RETENTION: 6 OZ. -A: ALIGNMENT PIN OPTION 5. MINIMUM GROUND PLANE RETENTION: 1 LB. (QTS-075-01-XXX-D-A SHOWN) 6. DELETED. SECTION 7. PARTS TO BE MOLDED TO POSITION. 8. MAXIMUM VARIANCE OF .002 0.05 . 9. DIMENSION APPLIES TO TERMINALS AND GROUND PLANES INDEPENDENT OF THE GROUND PLANE OR TERMINAL RESPECTIVELY. PROPRIETARY NOTE * * 10. LEAD STYLES -03 AND -05: TOP BODY (QTS) CANNOT HAVE -A OPTION AND UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND -04 AND -06 CAN USE EITHER -A OR -LC BODY. DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, 11. T-1SXX-XX-L CAN BE SUBSTITUTED FOR T-1SXX-XX-F. MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, 12. GROUND PLANE PRESS HEIGHT MUST BE .003 .08 LESS THAN THE MAX DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE HEIGHT OR .001 0.03 GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALSXX: .01 .3 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 13. WINDOW NOT PRESENT ON LEAD STYLES -02 THRU -06 HEIGHT .XXX: .005 .13 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PER REV. E OF THE QTS-25-XX-D-XX-X-XXXXXX: .0020 .051 e-Mail: info SAMTEC.com code: 55322 WRITTEN CONSENT OF SAMTEC, INC. 14. NOTE DELETED. SHEET SCALE: 1.5:1 MATERIAL: DO NOT SCALE DRAWING DESCRIPTION: 15. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC H.635mm DOUBLE ROW HS TERMINAL ASSEMBLY INSULATOR: LCP, UL94V-0 COLOR: BLACK RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION. TERMINAL: PHOS BRONZE DWG. NO. 16. PIN CAN EXTEND PAST WALL .003 0.08 MAX. GROUND PLANE: PHOS BRONZE 17. AVAILABLE FOR EXISTING CUSTOMERS ONLY. QTS-XXX-XX-XXX-D-XXX 18. DELETED. BY: DEAN P 09-14-2010 SHEET OF1 3 F: DWG MISC MKTG QTS-XXX-XX-XXX-D-XXX-MKT.SLDDRWREVISION AG QTS-25-XX-D-XX .055 1.40 LC-08-TM-01 .056 1.42 REF .010 0.25 REF.003 0.08 .0800 2.032 (SEE TABLE 6, SHT 1) FIG 2 -LC: LOCKING CLIP OPTION (QTS-075-01-XXX-D-LC SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) REF .020.020 0.5080.50.020 0.50 (SEE TABLE 3) FIG 3 -K: POLYIMIDE FILM PAD .2760 7.010 (USE K-DOT-.276-.375-.005)REFREF ** = SEE NOTE 17 .125 3.18 .206 5.24 REF REF .3230 8.204 ** = SEE NOTE 17 REF PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, .055 1.40 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE QTS-25-01-D-XX-X-GP OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REF REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail: info SAMTEC.com code: 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: FIG 4 DO NOT SCALE DRAWING -GP: GUIDE POST OPTION H.635mm DOUBLE ROW HS TERMINAL ASSEMBLY (QTS-075-01-XXX-D-GP SHOWN) DWG. NO. SHEET SCALE: 2:1 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) QTS-XXX-XX-XXX-D-XXX (AVAILABLE ON STYLE -01 ONLY) F: DWG MISC MKTG QTS-XXX-XX-XXX-D-XXX-MKT.SLDDRW BY: DEAN P 09-14-2010 SHEET OF2 3