NOTES: RC5-XX-XX-X-X-XX.XX-XX REVISION L DESIGNED & DIMENSIONED 1. REPRESENTS A CRITICAL DIMENSION. IN MILLIMETERS INCHES 2. SAMTEC LOGO TO APPEAR ON SURFACE AS SHOWN, APPROXIMATELY No OF POSITIONS 4.83 .190 x 17.78 .700 , RECESSED 0.25 .010 . END OPTION -10, -15, -20 3. MOLDED SURFACES SHALL HAVE MATTE FINISH, SURFACES TO BE FREE OF (PER ROW) -D: DOUBLE ENDED (SEE FIG. 1) SCRATCHES, NICKS, SINK AREAS, VOIDS, OR OTHER BLEMISHES. 4. MOLD TO BE INSERTED TO ACCEPT DIFFERENT CABLE DIAMETERS. -BC: BLUNT CUT (SEE FIG. 2) DO NOT 5. ALL EJECTOR PIN AND GATE LOCATIONS MUST BE APPROVED BY SAMTEC LEAD STYLE SCALE FROM PRODUCT ENGINEERING. -01 CABLE LENGTH* THIS PRINT 6. ANY ADDITIONAL VOIDING AND/OR MODIFICATIONS TO VOIDING MUST -XX.XX: BE APPROVED BY SAMTEC PRODUCT ENGINEERING. PLATING SPECIFICATION 7. ALL DRAFT MUST BE WITHIN THE SPECIFIED TOLERANCES. (00.25M 9.842 MIN -H: 30 HEAVY GOLD IN CONTACT 8. ALL INSIDE/OUTSIDE RADII 0.13 .005 MAX UNLESS OTHERWISE STATED. - 50.00M 1968.504 MAX AREA, 3 GOLD ON TAIL 9. FOR ALL LENGTHS, TOLERANCE SHALL BE 2%. -G: 10 GOLD IN CONTACT 10. ASSEMBLY TO BE 100% HI-POT TESTED AT 300V FOR OPENS AND SHORTS. ROW SPECIFICATION TEST TO BE DONE AFTER IN-PROCESS 2 AND IN-PROCESS 4. AREA, 3 GOLD ON TAIL -D: DOUBLE 11. MINIMUM LATCH PUSHOUT FORCE: 2.2N .50LB 12. ASSEMBLY TO BE BULK PACKAGED WITH ASBBLT4X5.5 ON EACH END PER PACKAGING STANDARD CO-RF-WI-3001-M. *NOTE: -02.00, -03.00, AND -05.00 ARE CATALOG STANDARD 13. DELETED LENGTHS. FOR OTHER LENGTHS CONTACT SAMTEC. 14. DELETED 15. REFER TO CRIMP SPECIFICATION PRINT FOR CRIMP AND STRIP C DIMENSIONS, TOLERANCES, AND TOOLING. 16. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO C PLACE, TO BE VIEWED FROM THE FRONT CORE. 17. CONTACT MUST FULLY BE INSIDE OF THE RC5B-XX-D & RC5-XX-D BODY. 18. REFER TO MD-XXX-XX-XXXXX-XX FOR SAMTEC MATERIAL PART NUMBER FIG 1 RC5-10-XX-X-D-X.XX-D SHOWN 1.27 .050 REF B ASSEMBLED LENGTH: XX.XX + 03 (SEE TABLE 1) 02 01 CABLE LENGTH: XX.XX 2% A 1.27 .050 REF DETAIL A SCALE 2 : 1 C LABEL-ET 20.010.0 .79.39 OR-103-XX0.10 .004 (SEE TABLE 2) UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE 6.350.10 .250.004 DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY X.X: 0.3 .01 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS X.XX: 0.13 .005 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN X.XXX: 0.051 .0020 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1:1.5 DESCRIPTION: INSULATOR: LCP, COLOR: BLACK RECTANGULAR ACCLIMATE DETAIL B CABLE: PVC JACKET/COPPER CONDUCTORS O-RING: NBR DETAIL C SCALE 4 : 1 DWG. NO. CONTACT: PHOS BRONZE MAX FLASH ALLOWED: .05 .002 SCALE 3 : 1 PREMOLD: RITEFLEX 640-RD30565P62-BLACK MAX GATE VESTIGE: .05 .002 RC5-XX-XX-X-X-XX.XX-XX OVERMOLD: ZYTEL PA70G13L 52-91908BKS MAX REGRIND: 10% LATCH: BeCu F: dwg misc mktg RC5-XX-XX-X-X-XX.XX-XX-MKT.SLDDRW BY: B RAY 06/18/2008 SHEET OF1 3-BC: BLUNT CUT REVISION L ADD LABEL-ET (BOTH ENDS) (BUILD DOUBLE-ENDED INITIALLY FOR E-TEST) -BC: BLUNT CUT IN-PROCESS 5 ASSEMBLED LENGTH: XX.XX + ASSEMBLED LENGTH: (XX.XXx 2) + 51 2.0 + x 2) (SEE TABLE 1) (SEE TABLE 1) LABEL-ET FIG 2 CABLE LENGTH: (XX.XX x 2) + 51 2.0 2% RC5-10-XX-X-D-XX.XX-BC SHOWN (SAME AS FIG. 1, EXCEPT AS SHOWN) IN-PROCESS 1 IN-PROCESS 2 ADD RC5B-XX-D TO RC5-XX-D STRIP, CRIMP & ADD RC5-XX-D 32.222.00 1.268.079 RC5-XX-D RC5-XX-D RC5B-XX-D 12.19 .480 C (SEE TABLE 1) (SEE NOTE 15) SEE NOTE 16 C (SEE TABLE 4) SECTION SEE NOTE 17 SCALE 2 : 1 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING RECTANGULAR ACCLIMATE DWG. NO. SHEET SCALE: 1:1 RC5-XX-XX-X-X-XX.XX-XX F: dwg misc mktg RC5-XX-XX-X-X-XX.XX-XX-MKT.SLDDRW BY: B RAY 06/18/2008 SHEET OF2 3