REVISION AN RFXXXX-XXXXX-XXXXXX-XXXX DESIGNED & DIMENSIONED IN MILLIMETERS INCHES CABLE CALL OUT OVERALL CABLE LENGTH 174: CCA-174 (RG-174 COAXIAL CABLE) MILLIMETERS OF CABLE DO NOT 316: CCA-316 (RG-316 COAXIAL CABLE) THIS PRODUCT MANUFACTURED 0100 MIN. (SEE NOTE 8 & 9) SCALE FROM Pb 316A: CCS-174525-01-C (RG-316 ACCLIMATE CABLE) WITH LEAD-FREE PROCESSING THIS PRINT END 2 PLATING OPTION END 1 CONNECTOR 1: GOLD ALL COMPONENTS -01SP: SMA-P-C-X-ST-CA1 (SEE SHEET 3) 2: GOLD / NICKEL COMBINATION -01RP: SMA-P-C-X-RA-CA1 (SEE SHEET 3) 3: ALTERNATE GOLD / NICKEL -01BJ: SMA-J-C-X-ST-BH1 (SEE SHEET 3) FIG 2 4: ALTERNATE GOLD / GOLD FLASH / NICKEL -01BR: SMA-J-C-X-ST-BR1 (SEE SHEET 3) CABLE STRIPPING DIMENSIONS 7. ALTERNATE GOLD MEDIUM/ GOLD FLASH -02SJ: MCX-J-C-X-ST-CA1 (SEE SHEET 3) PER CONFIGURATIONS (LEAVE BLANK FOR -SING OR -XXXXXX -02RP: MCX-P-C-XX-RA-CA1 (SEE SHEET 3) (SEE TABLE 1)(SEE NOTES 12,13,14,15) -02SP: MCX-P-C-XX-ST-CA1 (SEE SHEET 4) END 2 PREPARATION) -03SP: MMCX-P-C-XX-ST-CA1 (SEE SHEET 4) END 2 CONNECTOR OR PREPARATION -03RP: MMCX-P-C-X-RA-CA1 (SEE SHEET 4) mm C -01SP: SMA-P-C-X-ST-CA1 (SEE SHEET 3) -04SP: BNC5-P-C-XX-ST-CA1 (SEE SHEET 4) -01RP: SMA-P-C-X-RA-CA1 (SEE SHEET 3) mm -04BJ: BNC5-J-C-XX-ST-BH1 (SEE SHEET 4) -01BJ: SMA-J-C-X-ST-BH1 (SEE SHEET 3) -05SP: TNC-P-C-XX-ST-CA1 (SEE SHEET 4) mm -01BR: SMA-J-C-X-ST-BR1 (SEE SHEET 3) -05BJ: TNC-J-C-XX-ST-BH1 (SEE SHEET 5) -02SJ: MCX-J-C-X-ST-CA1 (SEE SHEET 3) -06BJ: NTPE-J-C-XX-ST-BH1 (SEE SHEET 5) -02RP: MCX-P-C-XX-RA-CA1 (SEE SHEET 3) -07SP: SMB5-P-C-XX-ST-CA1 (SEE SHEET 5) -02SP: MCX-P-C-XX-ST-CA1 (SEE SHEET 4) -07RP: SMB5-P-C-XX-RA-CA1 (SEE SHEET 5) -03SP: MMCX-P-C-XX-ST-CA1 (SEE SHEET 4) -07BJ: SMB5-J-C-X-ST-BH1 (SEE SHEET 5) mm C -03RP: MMCX-P-C-X-RA-CA1 (SEE SHEET 4) -13GP: GRFS-P-C-X-ST-CA1 -04SP: BNC5-P-C-XX-ST-CA1 (SEE SHEET 4) (316 OPTION ONLY) (SEE SHEET 5) mm C -04BJ: BNC5-J-C-XX-ST-BH1 (SEE SHEET 4) -13GJ: GRFS-J-C-X-ST-CA1 -05SP: TNC-P-C-XX-ST-CA1 (SEE SHEET 4) (316 OPTION ONLY) (SEE SHEET 6) -05BJ: TNC-J-C-XX-ST-BH1 (SEE SHEET 5) -01SB: SMA-J-C-X-ST-SB1 (SEE SHEET 6) -06BJ: NTPE-J-C-XX-ST-BH1 (SEE SHEET 5) -01SR: SMA-J-C-X-ST-SR1 (SEE SHEET 6) -07SP: SMB5-P-C-XX-ST-CA1 (SEE SHEET 5) -01PN: SMA-J-C4-XX-ST-PN1 (SEE SHEET 6) -07RP: SMB5-P-C-XX-RA-CA1 (SEE SHEET 5) -S7SP: SSMB-P-C-XX-ST-CA1 (SEE SHEET 7) * -07BJ: SMB5-J-C-X-ST-BH1 (SEE SHEET 5) * -S7RP: SSMB-P-C-XX-RA-CA1 (SEE SHEET 7) -13GP: GRFS-P-C-X-ST-CA1 -V3SJ: MMCXV-J-C-XX-ST-CA1 (SEE SHEET 7) (316 OPTION ONLY) (SEE SHEET 5) -V3SP: MMCXV-P-C-XX-ST-CA1 (SEE SHEET 7) -13GJ: GRFS-J-C-X-ST-CA1 -V3RP: MMCXV-P-C-XX-RA-CA1 (SEE SHEET 7) (316 OPTION ONLY) (SEE SHEET 6) -23GJ: AC-J-C-X-ST-CA1 -01SB: SMA-J-C-X-ST-SB1 (SEE SHEET 6) (316A OPTION ONLY, SEE SHEET 7) -01SR: SMA-J-C-X-ST-SR1 (SEE SHEET 6) -23GP: AC-P-C-X-ST-CA1 -01PN: SMA-J-C4-XX-ST-PN1 (SEE SHEET 6) (316A OPTION ONLY, SEE SHEET 7) -S7SP: SSMB-P-C-XX-ST-CA1 (SEE SHEET 7) -S7RP: SSMB-P-C-XX-RA-CA1 (SEE SHEET 7) END 1 PLATING OPTION -V3SJ: MMCXV-J-C-XX-ST-CA1 (SEE SHEET 7) 1: GOLD ALL COMPONENTS -V3SP: MMCXV-P-C-XX-ST-CA1 (SEE SHEET 7) 2: GOLD / NICKEL COMBINATION C -V3RP: MMCXV-P-C-XX-RA-CA1 (SEE SHEET 7) 3: ALTERNATE GOLD / NICKEL -23GJ: AC-J-C-X-ST-CA1 FIG 1 4: ALTERNATE GOLD / GOLD FLASH / NICKEL (316A OPTION ONLY, SEE SHEET 7) RFXXX-01SPX-01RPX-XXXX SHOWN 7. ALTERNATE GOLD MEDIUM/ GOLD FLASH -23GP: AC-P-C-X-ST-CA1 NOTES: (SEE SHEET 3 FOR PLATING SPECIFICS) (316A OPTION ONLY, SEE SHEET 7) -SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11) C = FOR INTERNAL USE ONLY, 1. REPRESENTS A CRITICAL DIMENSION. -XXXXXX: STRIPPED AND TINNED (THIS END ONLY- 2. CABLE CUT LENGTH: NOT FOR SALE (SEE NOTE 19) SEE NOTES 11-15, 18 & SHEET 6, FIG 3) = (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2). * = FOR EXISTING CUSTOMERS ONLY (SEE TABLE 1 FOR SUBTRACTORS) (SEE FIG 2) FORMAT: X.X mm 3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS.C (SEE FIG 2) FORMAT: X.X mm 4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1, THE TEST VOLTAGE FOR THE ASSEMBLYC (SEE FIG 2) FORMAT: X.X mm SHOULD BE SET TO THE END OPTION WITH THE LOWEST TEST VOLTAGE RATING. 5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET 6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS. DO NOT LEAVE ANY SPACE BLANK, 7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-RF-WI-3040-M. ASSEMBLIES WITH EACH MUST CONTAIN A LOCKWASHERS, NUTS, AND GASKETS TO BE SHIPPED KITTED AS ONE ASSEMBLY PER BAG, UNASSEMBLED. NUMERIC CHARACTER 0 THRU 9. 8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS. 9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA. F: DWG MISC MKTG RFXXXX-XXXXX-XXXXXX-XXXX-MKT.SLDDRW 10. MINIMUM BEND RADIUS FOR RF174 = 25.4 1.00 UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE * * RF316 = 12.7 .50 DIMENSIONS ARE IN THIS DOCUMENT CONTAINS CONFIDENTIAL AND MILLIMETERS INCHES . RF316A = 12.7 .50 PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: 11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF. INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 12. DIM,, AND HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mmX: 0.3 .01 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XX: 0.13 .005 PHONE: 812-944-6733 FAX: 812-948-5047 13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A. OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXX: 0.051 .0020 e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. 14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: 15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C. SEE END 1 AND END 2 ASSEMBLY PRINTS 16. CONNECTORS TO BE ORIENTED ACCORDING TO C0-HD-WI-3048-M. RF316 OR RF-174 CABLE ASSEMBLY 17. FOR BULKHEAD APPLICATIONS, THE END USER SHOULD TIGHTEN THE THREADED NUT TO 15 DWG. NO. IN-LB MINIMUM. 18. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED. RFXXXX-XXXXX-XXXXXX-XXXX 19. USED IN ACRX SERIES. BY: TIM P. 09-10-2010 SHEET OF1 7REVISION AN * * F: DWG MISC MKTG RFXXXX-XXXXX-XXXXXX-XXXX-MKT.SLDDRW PROPRIETARY NOTE = FOR INTERNAL USE ONLY, NOT FOR SALE (SEE NOTE 19) * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND * = FOR EXISTING CUSTOMERS ONLY PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR PHONE: 812-944-6733 FAX: 812-948-5047 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING RF316 OR RF-174 CABLE ASSEMBLY DWG. NO. SHEET SCALE: 1:1 RFXXXX-XXXXX-XXXXXX-XXXX BY: TIM P. 09-10-2010 SHEET OF2 7