S1SDX-XX-XXX-XX-XX.XX-LX REVISION L DESIGNED & DIMENSIONED FEP CABLE OPTION PINOUT IN MILLIMETERS INCHES -T: FEP INSULATION (LEAVE BLANK FOR SINGLE END ASSEMBLY) LEAVE BLANK FOR PVC -1: INDICATOR DOWN, CROSSED DO NOT (SEE NOTE 8) PIN 1 TO PIN 1 (SEE FIG 2, SHT 2) 0.0500.040 .0020.0016 SCALE FROM -2: INDICATOR DOWN, STRAIGHT (TYP) REF PIN 1 TO PIN 2 (SEE FIG 3, SHT 2) THIS PRINT No OF POSITIONS (PER ROW) -3: INDICATOR UP, CROSSED -02 THRU -20 PIN 1 TO PIN N (SEE FIG 4, SHT 3) -4: INDICATOR UP, STRAIGHT PIN 1 TO PIN N-1 (SEE FIG 5, SHT 3) WIRE GAUGE (AWG) -28, -30 LATCH OPTION DETAIL A -L: PLASTIC LATCH COLOR CODE SCALE 18 : 1 -C COLOR CODE WIRE C-309-01-XX ASSEMBLED LENGTH (SEE TABLE 4, SHT 2) (SPECIFY IN INCHES) 01.80 IN MINIMUM LEAVE BLANK FOR STANDARD WIRE (SEE TABLE 2, SHT 2) PLATING SPECIFICATION (NOT AVAILABLE FOR TEFLON OPTION, -T: BRIGHT ACID TIN TIN CONTACT AND TAIL TEFLON CABLE ONLY AVAILABLE IN BLUE) (FOR EXISTING CUSTOMER ONLY) -GF: 3 GOLD CONTACT AND TAIL DWCX-XX-XX-XXX 7.00 .276 REF (SEE TABLE 2, SHT 2) SEE NOTE 6 B DETAIL B SCALE 8 : 1 C 2.00 .079 REF ASSEMBLIED LENGTH (SEE NOTE 4) 5.55 .219 REF 1.00 .039 (TYP) C 3.25 .128 REF L (TOL NON-ACCUM) INDICATOR N (SEE TABLE 1) N-1 (SEE TABLE 1) (No OF POS + 0.35 .014 ) REF A C (No OF POS + (No OF POS + C (No OF POS - 1.00 .039 ) L 1.50 .059 ) REF 4.30 .169 ) REF 01 02 POS 1 INDICATOR ISD1-XX FIG 1 NOTES: S1SD-10-XXX-XX-XX.XX-L SHOWN C 1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: SIGNAL: 4.445N 1.0 LB . 3. PARTS TO BE PACKAGED IN BAG. PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND 4. FOR ASSEMBLIED LENGTHS LESS THAN 12.0 305 , TOLERANCE SHALL BE DIMENSIONS ARE IN MILLIMETERS. PROPRIETARY INFORMATION AND ALL DESIGN, 3.18 .125 , FOR OTHER LENGTHS, TOLERANCE SHALL BE 2%. MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, 5. REFER TO CRIMP SPECIFICATIONS FOR CRIMP AND STRIP DIMENSIONS, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE TOLERANCES, TOOLING, AND ITS REQUIREMENTS. OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR X.X: 0.3 .01 2 C 520 PARK EAST BLVD, NEW ALBANY, IN 47150 6. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS IN PLACE. REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY X.XX: 0.13 .005 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS 7. ALL FINISHED GOODS ARE TO BE ELECTRICALLY TESTED INCLUDING HI-POT TEST C X.XXX: 0.051 .0020 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL WITH 1 ET STAMP DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: ON THE BODY. MATERIAL: 1MM S1SD CABLE ASSEMBLY 8. ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY. INSULATOR: NYLON UL94V-0, COLOR: WHITE 9. REFER TO CRIMP SPECIFICATIONS PRINT FOR STRIP AND CRIMP DIMENSIONS, CONTACT: PHOS BRONZE DWG. NO. TOLERANCES, TOOLING, AND ITS REQUIREMENTS. S1SDX-XX-XXX-XX-XX.XX-LX 10. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR. 11. TABLE 3 IS DELETED AND REPLACED WITH EQUATIONS. F: DWG MISC MKTG S1SDX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW BY: VICKY Z 06/22/2013 SHEET OF1 3REVISION L ASSEMBLIED LENGTH (SEE NOTE 4) (SEE TABLE 1, SHT 1) (SEE TABLE 1, SHT 1) INDICATOR DOWN END 1 END 2 N-1 N N-1 N INDICATOR UP POS 1 INDICATOR 01 02 01 02 FIG 2 S1SD-10-XXX-XX-XX.XX-L1 SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) ASSEMBLIED LENGTH (SEE NOTE 4) (SEE TABLE 1, SHT 1) (SEE TABLE 1, SHT 1) INDICATOR DOWN END 1 END 2 N-1 N N-1 N INDICATOR UP PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY 01 02 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS 01 02 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 POS 1 INDICATOR DESCRIPTION: DO NOT SCALE DRAWING 1MM S1SD CABLE ASSEMBLY FIG 3 DWG. NO. SHEET SCALE: 2:1 S1SD-10-XXX-XX-XX.XX-L2 SHOWN S1SDX-XX-XXX-XX-XX.XX-LX (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) BY: VICKY Z 06/22/2013 SHEET OF2 3 F: DWG MISC MKTG S1SDX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW