REVISION Q S1SSX-XX-XXX-XX-XX.XX-X-XXX 2.79 .110 FEP CABLE OPTION OPTION 1.40 .055 -T: FEP INSULATION DOUBLE LEAVE BLANK FOR PVC (MUST BE USED ON -D END OPTION ONLY (SEE NOTE 8) & APPLIES TO END 2 HOUSING) -NUS: NO LATCH, UP, STRAIGHT No OF POSITIONS -NDS: NO LATCH, DOWN, STRAIGHT -02, -03, -05, -07, -10, -15, -20 -S: SINGLE END (PER ROW) AVAILABLE AS STANDARD END OPTION DO NOT -02 THRU -20 AVAILABLE AS ASO -S: SINGLE END SCALE FROM 5.59 .220 -D: DOUBLE END THIS PRINT WIRE GAUGE (AWG) 1.40 .055 1.40 .055 -28, -30 ASSEMBLIED LENGTH (SPECIFY IN INCHES) COLOR CODE 01.80 IN MINIMUM -C: COLOR CODE WIRE (SEE TABLE 3, SHEET 2) PLATING SPECIFICATION -D: DOUBLE END *-T: TIN PLATING LEAVE BLANK FOR STANDARD WIRE -GF: 3 MIN Au/50 Ni (SEE TABLE 1 ) OVERALL LENGTH SUBTRACTORS IN CONTACT AND TAIL NOT AVAILABLE FOR TEFLON OPTION, TEFLON CABLE ONLY AVAILABLE IN BLUE * = EXISTING CUSTOMERS ONLY 5.00 .197 REF B DESIGNED & DIMENSIONED 0.0500.040 .0020.0016 IN MILLIMETERS INCHES (TYP) C-309-01-XX C ASSEMBLED LENGTH DETAIL A (SEE NOTE 4) SCALE 12 : 1 2.80 .110 REF POSITION 1 INDICATOR 01 A C REF REF REF 02 DWCX-XX-XX-XXX ISS1-02 FIG 1 1.03 .040 S1SS-02-30-XX-XX.XX-S SHOWN SEE NOTE 6 DETAIL B NOTES: SCALE 8 : 1 C 1. REPRESENTS A CRITICAL DIMENSION. PROPRIETARY NOTE 2. MINIMUM PUSHOUT FORCE: SIGNAL: 6.6N 1.5 LB UNLESS OTHERWISE SPECIFIED, * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN MILLIMETERS. 3. PARTS TO BE PACKAGED IN BAG. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS 4. FOR ASSEMBLIED LENGTHS LESS THAN 13.00 IN, TOLERANCE SHALL BE TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, .125 3.18 , FOR OTHER LENGTHS, TOLERANCE SHALL BE 2%. DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 5. REFER TO CRIMP SPECIFICATIONS FOR CRIMP AND STRIP DIMENSIONS, OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR C X.X: 0.3 .01 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY X.XX: 0.13 .005 TOLERANCES, TOOLING, AND ITS REQUIREMENTS. PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS X.XXX: 0.051 .0020 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 C 6. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS IN PLACE. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 6:1 7. ALL FINISHED GOODS ARE TO BE ELECTRICALLY TESTED INCLUDING DESCRIPTION: INSULATOR: PPA UL 94-V0, COLOR: BLACK HI-POT TEST AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH 1MM CABLE ASSEMBLY CONTACT: PHOS BRONZE ASSEMBLY WITH (1) ET STAMP ON THE BODY. DWG. NO. 8. SINGLE ENDED ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY. S1SSX-XX-XXX-XX-XX.XX-X-XXX BY: VICKY Z 04/13/2010 SHEET OF1 2 F: DWG MISC MKTG S1SSX-XX-XXX-XX-XX.XX-X-XXX-MKT.SLDDRWREVISION Q ASSEMBLED LENGTH (SEE NOTE 4) LOGO UP 01 02 01 02 LOGO UP FIG 2 S1SS-02-30-XX-XX.XX-D-NUS SHOWN (SAME AS FIG 1, EXCEPT AS SHOWN) ASSEMBLED LENGTH (SEE NOTE 4) 01 LOGO DOWN 01 LOGO UP 02 02 ISS1-02 FIG 3 S1SS-02-30-XX-XX.XX-D-NDS SHOWN (SAME AS FIG 1, EXCEPT AS SHOWN) PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 1MM CABLE ASSEMBLY DWG. NO. SHEET SCALE: 4:1 S1SSX-XX-XXX-XX-XX.XX-X-XXX F: DWG MISC MKTG S1SSX-XX-XXX-XX-XX.XX-X-XXX-MKT.SLDDRW BY: VICKY Z 04/13/2010 SHEET OF2 2