DESIGNED & DIMENSIONED REVISION E S1SSX-XX-XXX-XX-XX.XX-LX IN MILLIMETERS INCHES PINOUT FEP CABLE OPTION (LEAVE BLANK FOR SINGLE END ASSEMBLY) -T: FEP INSULATION -1: LATCH DOWN, STRAIGHT LEAVE BLANK FOR PVC DO NOT (PIN 1 TO PIN 1, SEE FIG 2, SHT 2) (SEE NOTE 8) SCALE FROM -3: LATCH UP, STRAIGHT THIS PRINT (PIN 1 TO PIN N, SEE FIG 3, SHT 2) No OF POSITIONS -02 THRU -20 LATCH OPTION -L: PLASTIC LATCH WIRE GAUGE (AWG) ASSEMBLED LENGTH -28, -30 (SPECIFY IN INCHES) 01.80 IN MINIMUM COLOR CODE PLATING SPECIFICATION -C: COLOR CODE WIRE * -T: BRIGHT ACID TIN CONTACT AND TAIL (SEE TABLE 2, SHT 2) -GF: 3 GOLD CONTACT AND TAIL LEAVE BLANK FOR STANDARD WIRE (SEE TABLE 1, SHT 2 ) NOT AVAILABLE WITH S1SST * = EXISTING CUSTOMERS ONLY SEE NOTE 6 0.050.04 .002.002 (TYP) B DETAIL A SCALE 16 : 1 C-309-01-XX 6.43 .253 REF DETAIL B SCALE 8 : 1 C ASSEMBLED LENGTH (SEE NOTE 4) 4.45 .175 REF DWCX-XX-XX-XXX ISS1-XX-L 5.00 .197 REF (SEE TABLE 2, SHT 2) 3.17 .125 REF A 1.20 .047 REF C (No OF POS x 1.00 .039 ) C C C + 3.00 .118 (No OF POS -1) x 1.000 .0394 L L L REF 01 1.000 .0394 (TYP) POS 1 INDICATOR (TOL NON-ACCUM) FIG 1 S1SS-05-XXX-XX-XX.XX-L SHOWN NOTES: PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, 1. REPRESENTS A CRITICAL DIMENSION.C THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN MILLIMETERS. PROPRIETARY INFORMATION AND ALL DESIGN, 2. MINIMUM PUSHOUT FORCE: SIGNAL: 4.445N 1.0 LB . MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: 3. PARTS TO BE PACKAGED IN BAG. AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 4. FOR ASSEMBLIED LENGTHS LESS THAN 13.00 IN, TOLERANCE SHALL BE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 3.18 .125 , FOR OTHER LENGTHS, TOLERANCE SHALL BE 2%. X.X: 0.3 .01 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY X.XX: 0.13 .005 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 5. REFER TO CRIMP SPECIFICATIONS FOR CRIMP AND STRIP DIMENSIONS, X.XXX: 0.051 .0020 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 TOLERANCES, TOOLING, AND ITS REQUIREMENTS. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: C 6. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS IN PLACE. INSULATOR: NYLON, COLOR: WHITE 7. ALL FINISHED GOODS ARE TO BE ELECTRICALLY TESTED INCLUDING HI-POT TEST 1MM CABLE ASSEMBLY C CONTACT: PHOS BRONZE AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL WITH 1 ET STAMP DWG. NO. ON THE BODY. S1SSX-XX-XXX-XX-XX.XX-LX 8. ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY. BY: JESSIE W 8/22/2014 SHEET OF1 2 F: DWG MISC MKTG S1SSX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRWREVISION E END 1 END 2 END 1 END 2 C ASSEMBLED LENGTH C ASSEMBLED LENGTH (SEE NOTE 4) (SEE NOTE 4) 01 01 01 01 FIG 2 FIG 3 S1SS-05-XXX-XX-XX.XX-L1 SHOWN S1SS-05-XXX-XX-XX.XX-L3 SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) 1.16 .046 REF FIG 4 S1SS-02-XXX-XX-XX.XX-L SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (FOR POSITIONS -02 THRU -04) PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 1MM CABLE ASSEMBLY DWG. NO. SHEET SCALE: 3:1 S1SSX-XX-XXX-XX-XX.XX-LX BY: JESSIE W 8/22/2014 SHEET OF2 2 F: DWG MISC MKTG S1SSX-XX-XXX-XX-XX.XX-LX-MKT.SLDDRW