REVISION N SCRES-X-XX.XX-XX DESIGNED & DIMENSIONED IN MILLIMETERS INCHES PLATING SPECIFICATION END OPTION -G: .000050 GOLD ON -D: DOUBLE ENDED CONTACT AREAS, (ONE END SEALED) NICKEL ON SHELLS (SEE FIG 1, SHT. 1) -BC: BLUNT CUT (SEE FIG 2, SHT. 2) -0.25 AND -0.50 ARE CATALOG STANDARD LENGTHS. LENGTH *NOTE: FOR OTHER LENGTHS CONTACT SAMTEC. C -XX.XX ( SEE TABLE 1) (IN METERS) (0.17M 6.69 MIN - 50.00M 1968.50 MAX) XX.XX +/- 2% (SEE TABLE 1) REF (SEE NOTES 2 & 17) END 1 END 2 THIS PRODUCT MANUFACTURED Pb WITH LEAD-FREE PROCESSING DO NOT SCALE FROM THIS PRINT 11.68 .460 REF LABEL-ET 48.45 1.907 REF SPN-17-01 XX.XX2% 14.61 .575 01 08 20.0010 .787.394 REF 08 01 OR-17-01 SPG-17-01 FIG 1 +0.00 +.000 3.18 .125 -0.52 -.020 SCRES-G-XX.XX-D NOTES: +0.00 +.000 14.98 .590 -0.52 -.020 C 1. REPRESENTS A CRITICAL DIMENSION. C 2. ASSEMBLY TO BE 100% TESTED TO CAT 3 USING FLUKE DTX-1800 CABLE ANALYZER BEFORE PREMOLD AND AFTER FINISHED ASSEMBLY. AFTER FINAL ELECTRICAL TEST, LABEL WITH 1 LABEL-ET. 3. DELETE 4. PANEL THICKNESS: 0.8 .03 - 5.2 .20 . 5. NOTE DELETED. 6. TORQUE SPECIFICATION FOR SPN-17-01 IS 12 IN-LB. 7. PART MUST SCREW INTO SAMTEC PART SCN-17-01. 8. PART MUST SCREW INTO SAMTEC PART SPN-17-01 +0.00 +.000 27.70 1.091 9. FLAT REQUIRED AT PARTING LINE OF CAMS TO AVOID DRAGGING THREADS. -0.52 -.020 10. NOTE DELETED. 11. ALL IDENTIFICATION MARKS MUST NOT STAND GREATER THAN 0.051 .002 OFF THE SURFACE RECOMMENDED PANEL HOLE OF THE PART. 12. MOLD TO BE INSERTED TO ACCEPT DIFFERENT CABLE DIAMETERS. (SEE NOTE 4) 13. ALL EJECTOR PIN AND GATE LOCATIONS MUST BE APPROVED BY SAMTEC PRODUCT CPC ENGINEERING. UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE FREQUENCY DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION 14. ANY ADDITIONAL VOIDING AND/OR MODIFICATIONS TO VOIDING MUST BE APPROVED BY THIS SHEET CONFIDENTIAL AND PROPRIETARY TO SAMTEC PRODUCT ENGINEERING. TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED 15. SAMTEC LOGO SHALL APPEAR ON SURFACE SHOWN, APPROXIMATELY 1.88 X 3.00. DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR A 16. COMPONENTS OF ASSEMBLY TO BE INSPECTED USING COMPONENT PRINTS. DISCLOSED TO OTHERS OR USED FOR ANY C X.X: 0.35 .014 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS 17. ASSEMBLY TO BE BULK PACKAGED. X.XX: 0.25 .010 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN 18. NOTE DELETED. X.XXX: 0.15 .0060 CONSENT OF SAMTEC, INC. e-Mail: info SAMTEC.com code: 55322 B C2 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1:1.53846DESCRIPTION: SEALED CIRCULAR RECEPTACLE, ETHERNET INSULATOR: GLASS FILLED THERMOPLASTIC CONTACTS: COPPER ALLOY C SHIELDS: CRS DWG. NO. CABLE NUT: PA66 SEALED PREMOLD: TPE (RF640A), SHOT WEIGHT: 10.66G .024LB SCRES-X-XX.XX-XX SEALED OVERMOLD: PA66 GF14 FR (80G14), SHOT WEIGHT: 12.7G .028LB D BY: B.HARPENAU 5/4/2007 SHEET OF1 6 F: DWG MISC MKTG SCRES-X-XX.XX-XX-MKT.SLDDRWREVISION N C XX.XX (SEE TABLE 1) (SEE NOTES 2,3,& 17) END 1 FIG 2 SCRES-G-XX.XX-BC (SAME AS FIG. 1 UNLESS OTHERWISE STATED) -D: IN-PROCESS 1 ECA-02-02 CUT CABLE TO LENGTH & ADD ETHB-01 END 1 END 2 XX.XX2% (SEE TABLE 1) ECA-02-02 ETHB-01 -D: IN-PROCESS 2 STRIP OUTER JACKET TO DIMENSION SHOWN END 1 END 2 14.001.00 .551.039 (TYP) SHIELD -D: IN-PROCESS 3 J1 END: TWIST SHIELD TO FORM SINGLE CONDUCTOR. STRIP INDIVIDUAL WIRES TO DIMENSION SHOWN & TIN DIP J2 END: FOLD BACK SHIELD END 1 END 2 13.510.0000 .532.000 F: DWG MISC MKTG SCRES-X-XX.XX-XX-MKT.SLDDRW 3.18 .125 CPC PROPRIETARY NOTE FREQUENCY THIS DOCUMENT CONTAINS INFORMATION THIS SHEET CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR A DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 TWISTED SHIELD OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail: info SAMTEC.com code: 55322 CONSENT OF SAMTEC, INC. B C3, C4 DESCRIPTION: DO NOT SCALE DRAWING SEALED CIRCULAR RECEPTACLE, ETHERNET C DWG. NO. SHEET SCALE: 1:1 SCRES-X-XX.XX-XX D BY: B.HARPENAU 5/4/2007 SHEET OF2 6