SFM-105-T2-L-D-A-K-TR Samtec

F-219 (Rev 23JAN19) SFM11002LDA SFML125T2LDLC SFML115T2LDLC SFM12502LSH (1.27 mm) .050 SMT & THROUGH-HOLE TIGER EYE SOCKET Low insertion force Tiger Eye contacts available SFM Board Mates: SPECIFICATIONS TFM (1.27 mm x 1.27 mm) For complete specifications and SFM Cable Mates: .050 x .050 micro pitch recommended PCB layouts TFSD, TFSS see www.samtec.com SFM or www.samtec.com SFML SFML Board Mates: Insulator Material: TFML Black Liquid Crystal Polymer Plating: Au or Sn over 50 (1.27 m) Ni Current Rating (SFM/TFM): 3.2 A per pin (2 pins powered) Passes 10 Year Voltage Rating: MFG 250 VAC mated with TFM Locking option Operating Temp Range: Locking feature -55 C to +125 C Locking clip option increases unmating Insertion Depth: 10 YEAR MFG Screw Down option WITH 30 GOLD (3.05 mm) .120 to force (SFML) (4.06 mm) .160 EXTENDED LIFE Wiping Distance: PRODUCT (0.38 mm) .015 HIGH MATING HIGH-SPEED CHANNEL PERFORMANCE Choice of SMT or Normal Force: CYCLES Standard= 132 g (1.29 N) avg. through-hole tails Rating based on Samtec reference LIF= 90 g (0.88 N) avg. channel. For full SI performance data Max Cycles: visit Samtec.com or contact 8 Gbps 10,000 with 30 (0.76 m) Au SIG samtec.com (Call Samtec for E.L.P. plating option) RoHS Compliant: TYPE NO. PINS Yes LEAD STYLE 1 STRIP PER ROW PROCESSING Lead-Free Solderable: Yes (Surface Mount) (Through-hole) SMT Lead Coplanarity: 03, 04, 06, 08 (0.10 mm) .004 max (05-25) (SFM only) 02 01, 03 (0.15 mm) .006 max (30-50)* SFM *(.004 stencil solution = Tiger Eye Contact = Tiger Eye Contact = Standard may be available contact 05, 07, 10, 15, 20, (BeCu) (BeCu) IPG samtec.com) 25, 30, 35, 40, 45, 50 SFML (Standard sizes) L2 L1, L3 = Locking RECOGNITIONS = Low Insertion Force = Low Insertion Force Tiger Eye Contact Tiger Eye Contact For complete scope (BeCu) (BeCu) of recognitions see (1.78) www.samtec.com/quality (1.27) .050 x No. of Positions + (0.38) .015 .070 02 T2 T1 (2.41) = Tiger Eye LITE Contact = Tiger Eye LITE Contact FILE NO. E111594 .095 (Phosphor Bronze) (Phosphor Bronze) 01 (1.27) .050 TYP SINGLE ROW (1.78) .070 (1.27) .050 x No. of Positions + (3.94) .155 (9.78) .385 except for alignment pin option: (1.27) .050 x No. of Positions + (3.17) .125 (3.37) (1.27) (2.03) .080 .133 02 .050 (3.68) (3.05) (2.26) .145 .120 .089 SH (02 only) 01 (1.27) .050 TYP (0.58) DOUBLE ROW .023 (2.41) (3.68) (9.78) .385 .095 .145 (0.13) (3.05) .005 (4.64) (4.70) .120 (2.79) TYP .183 .185 .110 (3.18) (0.51) (4.19) (2.26) .125 .020 Note: .165 .089 DH Some sizes, styles and (02 only) options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.SFM120L3LD SFM11001LDA SFM11002LDDS SFM105L3LD SFML115T1LDLC SFM11502LDH SFM, SFML SERIES SMT & THROUGH-HOLE TIGER EYE SOCKET Mates with TFM for coplanar and perpendicular mating Screw down High-reliability option Tiger Eye contacts Surface mount or Through-hole tails (1.27 mm x 1.27 mm) ALSO AVAILABLE .050 x .050 micro pitch (MOQ Required) OTHER SOLUTIONS Solder nail option Other sizes Lower cost plating options. See SFC Series. Other platings ROW OPTION PLATING OPTION OPTION Specify only A, LC or DS Specify only L S (Not available with DH, SH) K or P = 10 (0.25 m) Gold on contact, Matte Tin on tail = Single Row (Lead styles 02, (Call Samtec for E.L.P. plating option) (SFM only) A L2, T2 only) = Alignment Pin (Available with all lead styles) K D = Polyimide film = Double Row LEAD STYLE A B Pick & Place Pad (3.05) .120 (0.51) .020 01, L1, T1 LC (Not available = Locking Clip 03, L3 (1.91) .075 (0.41) .016 SH with DH, SH) (Available with all lead styles) = Single Horizontal (Manual placement required) (05 thru 30 positions only) (1.78) P (SFM only) (1.27) .050 x No. of Positions + (0.38) .015 .070 = Plastic Pick & (Lead style 02 only) DS Place Pad (2.41) = Dual Screw Down for (Not available .095 (1.60 mm) .062 PCB DH with DH, SH) 01 (1.27) (05 thru 40 positions only) = Double Horizontal .050 TYP (Lead styles 01, 02 & 03 only) (05 thru 30 positions only) SINGLE ROW Specify TR last (Requires D row option) (SFM only) (Lead styles 02, (Not available with SFML) (Lead style 02 only) (1.27) .050 x No. of Positions + (3.94) .155 L2, T2 only) (Mates with TFM-DS option) except for alignment pin option: (Not available with A, TR (1.27) .050 x No. of Positions + (3.17) .125 (1.27) LC, K, P, TR) = Tape & Reel (2.03) .080 (3.68) .050 02 .145 (Required callout for DH, SH) (3.68) (3.05) (8.50) .145 .120 .335 (1.27) 01 (1.78) .050 TYP .070 DOUBLE ROW (2.41) (3.68) DS (1.65) .095 .145 (D, 01 02 & 03) (1.27) .065 .050 (4.57) (2.79) .180 .110 A (0.13) (1.27) .050 DIA (1.41) (0.25) x .005 .056 .010 (1.59) .063 TYP B A LC Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.