SFM-115-L2-S-D-LC Samtec

RUGGED TIGER EYE SYSTEMS (1.27 mm) .050 PITCH MAX 8 3.2 Gbps Amps FEATURES & BENEFITS Screw down, locking clip, friction latching and weld tab ruggedizing options Shrouded, polarized and keyed Surface mount or through-hole tails High-density, four row design (FOLC/MOLC Series) Discrete wire assemblies available in single or double row, 28 and 30 AWG PVC or Teflon wire contact asp samtec.com for custom solutions Cable components (ISDF/CC03) and tooling available IDC cable Locking for assemblies with increased Dupont Teflon is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. rugged strain relief unmating force (FFSD/FFMD, FFTP/FMTP) (SFML/TFML) KEY SPECIFICATIONS (TFM/SFM) STACK INSULATOR CONTACT OPERATING CURRENT VOLTAGE MAX PITCH PLATING HEIGHTS MATERIAL MATERIAL TEMP RANGE RATING RATING CYCLES 10,000 with 30 BeCu (SFM) (0.76 m) Au Au or Sn over 50 3.2 A per pin 1.27 mm 6 to 12 mm Black LCP -55 C to +125 C 250 VAC Phosphor Bronze (1.27 m) Ni (2 pins powered) (Call Samtec for (TFM) E.L.P. plating option) F-221 samtec.com/127mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.MAX 8 3.2 Gbps Amps (1.27 mm) .050 PITCH SMT/THROUGH-HOLE SOCKET NO. PINS PLATING ROW 1 LEAD STYLE OPTIONS SERIES - PER ROW - - OPTION - OPTION - (Surface Mount) (Through-hole) Specify only Specify only SFM 03, 04, 06, 08 L S A, LC or DS K or P = Standard (SFM only) = 10 (0.25 = Single Row (Not available (Lead styles 02, 02 01, 03 m) Gold on (SFM only) with DH, SH) L2, T2 only) = Tiger Eye = Tiger Eye contact, Matte SFML 05, 07, 10, 15, Contact (BeCu) Contact (BeCu) Tin on tail = Locking D 20, 25, 30, 35, A K (Call Samtec = Double Row = Alignment Pin = Polyimide film for E.L.P. 40, 45, 50 L2 L1, L3 Pick & Place Pad plating option) (Standard sizes) = Low Insertion = Low SH (Not available Force Insertion Force LC = Single with DH, SH) Tiger Eye Tiger Eye = Locking Clip Horizontal Contact (BeCu) Contact (BeCu) (Manual (05 thru 30 placement P positions only) required) = Plastic Pick T2 T1 (SFM only) & Place Pad = Tiger Eye = Tiger Eye (Lead style (Not available LITE Contact LITE Contact DS 02 only) with DH, SH) (Phosphor (Phosphor = Dual Screw Bronze) Bronze) Down for DH Specify TR or (1.60 mm) .062 = Double FR last Required PCB (05 thru 40 Horizontal for DH & SH. positions only) (05 thru 30 (Lead styles 02, (Lead styles 01, positions only) L2 & T2 only) 02 & 03 only) SFM (SFM only) (Requires D (Lead style Board Mates: row option) TR 02 only) (Not available with = Tape & Reel TFM SFML) (Mates with TFM-DS option) FR Cable Mates: (Not available = Full Reel TFSD, TFSS with A, LC, Tape & Reel K, P, XR) (must order max. quantity per reel contact Samtec SFML for quantity breaks) Board Mates: TFML (2.41) (1.78) (1.27) .050 x No. of Positions + (0.38) .015 .095 .070 (2.41) (4.70) .095 .185 (2.79) .110 (3.18) (4.19) .125 SINGLE ROW .165 SURFACE MOUNT (1.27) .050 x No. of Positions + (3.94) .155 except for alignment pin option: (2.41) (3.68) (1.27) .050 x No. of Positions + (3.17) .125 .095 .145 (3.68) (4.57) (3.05) (2.79) .145 .120 .180 .110 A DOUBLE ROW THROUGH-HOLE B (9.78) .385 (9.78) .385 (3.37) (4.64) .133 .183 LEAD STYLE A B (3.68) 01, L1, T1 (3.05) .120 (0.51) .020 SH .145 DH 03, L3 (1.91) .075 (0.41) .016 (8.50) .335 (1.78) .070 DS A LC Note: Some lengths, styles and options are non-standard, View complete specifications at: samtec.com SFM & samtec.com SFML non-returnable. F-221 samtec.com/127mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.