SFM-121-02-STL-D-A-P Samtec

F-215 (Rev 24JUL15) SFM11002LDA SFML125T2LDLC SFML115T2LDLC SFM12502LSH SYSTEM (1.27 mm) .050 SMT & THROUGH-HOLE TIGER EYE SOCKET Low insertion force Tiger Eye contacts available SFM Mates with: (1.27 mm x 1.27 mm) SPECIFICATIONS TFM, TFSD, TFSS .050 x .050 micro pitch For complete speci cations and SFML Mates with: recommended PCB layouts TFML see www.samtec.com SFM or www.samtec.com SFML Insulator Material: Black Liquid Crystal Polymer Plating: Au or Sn over 50 (1.27 m) Ni Current Rating (SFM/TFM): 3.2 A per pin (1 pin powered per row) Voltage Rating: Passes 10 Year 250 VAC mated with TFM MFG Operating Temp Range: -55C to +125C Locking feature Locking option Contact Resistance: increases unmating Locking clip option 15 m force (SFML) Insertion Depth: Screw Down option (3.05 mm) .120 to (4.06 mm) .160 Choice of SMT or Wiping Distance: through-hole tails (0.38 mm) .015 Normal Force: Standard= 132 g (1.29 N) avg. LIF= 90 g (0.88 N) avg. Insertion Force (SFM): (Single contact only) Standard= 2.5 oz (0.69 N) avg. TYPE NO. PINS LITE= 2.0 oz (0.56 N) avg. LEAD STYLE 1 STRIP PER ROW LIF= 1.4 oz (0.39 N) avg. Withdrawal Force (SFM): (Single contact only) Standard= 2.0 oz (0.56 N) avg. LITE= 1.5 oz (0.42 N) avg. (Surface Mount) (Through-hole) LIF= 1.0 oz (0.28 N) avg. 03, 04, 06, 08 Max Cycles: (SFM only) 10,000 with 30 (0.76 m) Au SFM 02 01, 03 (Call Samtec for E.L.P. = Standard = Tiger Eye Contact = Tiger Eye Contact plating option) 05, 07, 10, 15, 20, (BeCu) (BeCu) RoHS Compliant: Yes 25, 30, 35, 40, 45, 50 SFML (Standard sizes) L2 L1, L3 = Locking Processing: = Low Insertion Force = Low Insertion Force Lead-Free Solderable: Yes Tiger Eye Contact Tiger Eye Contact SMT Lead Coplanarity: (BeCu) (BeCu) (0.10 mm) .004 max (05-25) (1.78) (1.27) .050 x No. of Positions + (0.38) .015 (0.15 mm) .006 max (30-50) .070 02 T2 T1 (2.41) = Tiger Eye LITE Contact = Tiger Eye LITE Contact .095 RECOGNITIONS (Phosphor Bronze) (Phosphor Bronze) 01 (1.27) For complete scope .050 TYP SINGLE ROW of recognitions see (1.78) www.samtec.com/quality .070 (1.27) .050 x No. of Positions + (3.94) .155 (9.78) .385 except for alignment pin option: (1.27) .050 x No. of Positions + (3.17) .125 (3.37) (1.27) (2.03) .080 .133 FILE NO: 090871 0 000 02 .050 (3.68) (3.05) (2.26) .145 .120 .089 SH (02 only) 01 (1.27) .050 TYP (0.58) DOUBLE ROW .023 (2.41) (3.68) (9.78) .385 .095 .145 (0.13) (3.05) .005 (4.64) (4.70) .120 (2.79) TYP .183 .185 .110 (3.18) (0.51) (4.19) (2.26) .020 .125 .165 .089 DH Note: Some sizes, styles and (02 only) options are non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.SFM120L3LD SFM11001LDA SFM11002LDDS SFM105L3LD SFML115T1LDLC SFM11502LDH SFM, SFML SERIES Mates with TFM for coplanar and perpendicular mating Screw down High reliability option Tiger Eye contacts Surface mount or Through-hole tails ALSO AVAILABLE (1.27 mm x 1.27 mm) (MOQ Required) .050 x .050 micro pitch Solder nail option OTHER SOLUTIONS Other sizes Other platings Lower cost plating options. See SFC Series. Contact Samtec. ROW PLATING OPTION OPTION OPTION Specify only A, LC or DS S Specify only L (Not available with DH, SH) = Single Row K or P = 10 (0.25 m) Gold on contact, Matte Tin on tail (SFM only) (Lead styles 02, (Call Samtec for E.L.P. plating option) A L2, T2 only) = Alignment Pin (Available with all Lead Styles) D K = Double Row = Polyimide lm LEAD STYLE AB Pick & Place Pad (3.05) .120 (0.51) .020 LC 01, L1, T1 (Not available = Locking Clip SH 03, L3 (1.91) .075 (0.41) .016 with DH, SH) (Available with all lead styles) = Single Horizontal (Manual placement required) (05 thru 30 positions only) (1.78) (SFM only) P (1.27) .050 x No. of Positions + (0.38) .015 .070 (Lead style 02 only) = Plastic Pick & DS Place Pad (2.41) = Dual Screw Down for (Not available .095 (1.60 mm) .062 PCB DH with DH, SH) 01 (1.27) (05 thru 40 positions only) = Double Horizontal .050 TYP (Lead styles 01, 02 & 03 only) (05 thru 30 positions only) SINGLE ROW Specify TR last (Requires D row option) (SFM only) (Lead styles 02, (Not available with SFML) (Lead style 02 only) (1.27) .050 x No. of Positions + (3.94) .155 L2, T2 only) (Mates with TFM-DS option) except for alignment pin option: (Not available with A, TR (1.27) .050 x No. of Positions + (3.17) .125 (1.27) LC, K, P, TR) = Tape & Reel (2.03) .080 (3.68) .050 02 .145 (Required callout (3.68) for DH, SH) (3.05) (8.50) .145 .120 .335 (1.27) 01 (1.78) .050 TYP DOUBLE ROW .070 (2.41) (3.68) DS .095 (1.65) .145 (D, 01 02 & 03) (1.27) .065 .050 (4.57) (2.79) .180 .110 A (0.13) (1.27) .050 DIA (1.41) (0.25) x .005 .056 .010 (1.59) .063 TYP B A LC WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.