REVISION AE SFML-1XX-XX-XXX-D-XXX OPTIONS AE (LEAVE BLANK FOR STANDARD No OF POSITIONS AND USE SFML-XX-D) .020 0.51 -05, -07, -08, -10 THRU -50 -A: ALIGNMENT PIN (USE SFML-XX-D-A) REF (PER ROW) .060 1.52 (SEE FIG 5, SHT 3) REF LEAD STYLE -LC: LOCKING CLIP (SEE FIG 7, SHT 3) (USE (2) LC-05-TM & SFML-XX-D) (SEE NOTE 9) DETAIL D -01: THROUGH HOLE FIG 1 DO NOT -P: PICK & PLACE PAD (SEE FIG 6, SHT 3) (USE C-44-01-XXX, SEE FIG 1, SHT 1) ALTERNATE CONSTRUCTION SCALE FROM (USE PPP-02) (NOT AVAILABLE IN 5 POS) -02: SURFACE MOUNT THROUGH HOLE/STRAIGHT MODIFIED THIS PRINT -TR: TAPE & REEL PACKAGING (SHOWN: SFML-125-X1-XXX-D) (USE C-44-02-XXX, SEE FIG 3, SHT 2) (N/A with -X1 AND -X3 LEAD STYLE, -03: STRAIGHT MODIFIED SEE FIG 2, SHT 1) D (USE C-44-03-XXX, SEE FIG 1, SHT 1) -K: POLYIMIDE FILM PAD -L1: THROUGH HOLE (LOW INSERTION) 01 (USE K-500-300)(SEE FIG.4, SHT. 2) (USE C-61-01-XXX, SEE FIG 1, SHT 1) -SN: SOLDER NAIL (USE SFML-XX-D-SN & -L2: SURFACE MOUNT (LOW INSERTION) .145 3.68 REF WT-27-01-T) (SEE FIG 8, SHT 4) (USE C-61-02-XXX, SEE FIG 3, SHT 2) 02 (AVAILABLE ON -X2 LEAD STYLES ONLY) -L3: STRAIGHT MODIFIED (LOW INSERTION) -SN2: SOLDER NAIL FOR .093 BOARD (USE C-61-03-XXX, SEE FIG 1, SHT 1) (USE SFML-XX-D-SN & -T1: THROUGH HOLE (PHOS BRONZE) WT-27-02-T) (SEE FIG 8, SHT 4) (USE C-119-01-XXX, SEE FIG 1, SHT 1) .050 1.27 REF .080 2.03 (ONLY AVAILABLE WITH -02, L2, AND T2 LEAD -T2: SURFACE MOUNT (PHOS BRONZE) REF STYLE. NOT AVAILABLE WITH -A, -LC OPTIONS) (USE C-119-02-XXX, SEE FIG 3, SHT 2) ROW SPECIFICATION .120 3.05 REF .100 2.54 REF (TYP) -D: DOUBLE ROW AE (USE SFML-XX-D-X) REF (TYP) PLATING SPECIFICATION (SEE NOTE 5 C2 & TABLE 3) -S: 30 SELECTIVE GOLD IN CONTACT AREA, (No OF POS x .050 1.27 + .155 3.94 REF MATTE TIN ON TAIL -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, SFML-XX-D (No OF POS x .050 1.27 ) + .015 .38 REF MATTE TIN ON TAIL .035 0.89 -H: 30 HEAVY GOLD IN CONTACT AREA, 3 GOLD ON TAIL REF (TYP) -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL .065 1.65 REF .180 4.57 -STL: 30 SELECTIVE GOLD IN CONTACT AREA, REF TIN/LEAD (90/10+/-5%) TAIL (ONLY AVAILABLE ON C3 -02 AND -L2 LEADSTYLES) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, (SEE TABLE 1) MATTE TIN ON TAIL .110 2.79 -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .005 0.13 REF MATTE TIN ON TAIL REF -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, REF 1 MAX SWAY 2 MAX TOE MATTE TIN ON TAIL (SEE TABLE 1) (TYP) (TYP) C4 .050 1.27 C1 .050 1.27 (No OF POS x .050 1.27 ) - .050 1.27 NOTES: REF C 1. REPRESENTS A CRITICAL DIMENSION. SECTION C8 2. COPLANARITY: .004 .10 FOR POS. 10 THRU 26 .006 .15 FOR POS. 27 THRU 50 3. MINIMUM PUSHOUT FORCE: .5 LB. 4. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH MM/MM AFTER ASSEMBLY. 5. POSITIONS -05 AND -07 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN AND WILL NOT HAVE POLARIZATION NOTCH POSITIONS -10 THROUGH -24 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN FIG 2 SECTION POSITIONS -25 THROUGH -34 WILL HAVE TWO CLIPS AT DIMENSION SHOWN -TR: TAPE & REEL PACKAGING POSITIONS -35- THROUGH -50 WILL HAVE THREE CLIPS: TWO AT DIMENSION SHOWN & ONE CENTERED ON INSULATOR. (ALTERNATE KEYING OPTION SHOWN) 6. SEE NOTCH FOR PROPER ORIENTATION. 7. PINS CAN BE ORIENTED IN ANY DIRECTION BOTH ROWS MUST FACW SAME WAY. 8. MAXIMUM PIN HEIGHT VARIATION BETWEEN ANY TWO ROWS: .003 .08 . 9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION 10. TUBE PARTS WITH NOTCH TOWARD ARROW. UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION POS. 1 CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 CONSENT OF SAMTEC, INC. e-Mail: info SAMTEC.com code: 55322 USER DIRECTION OF UNREELING MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATOR: .050 1.27 x .050 1.27 LOCKING SOCKET ASSEMBLY VECTRA E130i, LCP UL 94 VO DWG. NO. COLOR: BLACK SFML-1XX-XX-XXX-D-XXX CONTACT: BeCu SEE NOTE 6 PHOS BRONZE BY: BRATCHER 4/19/99 SHEET OF1 4 c: enterprisevault DWG MISC MKTG SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRWFIG 4 REVISION AE -K: POLYIMIDE FILM PAD OPTION (SHOWN: SFML-110-X2-X-D-K) (ALTERNATE CONSTRUCTION SHOWN) FIG 3 C5 .190 4.83 -X2: SURFACE MOUNT (SAME AS FIG 1, UNLESS OTHERWISE STATED) (No OF POS x .050 1.27 ) - .050 1.27 (TOL ACCUM .005 .13 .1575.0050 4.0000.127 NOTE: = USED MEASURED DIMENSION (REF) = - .1575 4.000 ) /2 .020 .51 C-XX-X2-XXX C7 2 MAX SWAY (TYP) C6 +.002 +0.05 .185 4.70 -.005 -0.13 +4 SEE NOTE 2 -2 .161 4.09 REF SECTION c: enterprisevault DWG MISC MKTG SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail: info SAMTEC.com code: 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .050 1.27 x .050 1.27 LOCKING SOCKET ASSEMBLY DWG. NO. SHEET SCALE: 4:1 SFML-1XX-XX-XXX-D-XXX BY: BRATCHER 4/19/99 SHEET OF2 4