(1.27 mm) .050 PITCH DISCRETE WIRE ASSEMBLY/COMPONENTS POSITIONS WIRE PLATING ASSEMBLED END END 2 SERIES - PER ROW - GAUGE - OPTION - LENGTH - OPTION - OPTION Requires SFSD 03, 04, 05, 28 G XX.XX S D, DS, DR = Double Row = 28 AWG = 10 = Assembled = Single Ended 07, 10, 15, (End 1 Notch Up) PVC Cable (0.25 m) Length in 20, 25, 40, 50 Gold on Inches 28C D (Standard sizes) NUS contact, (76.20 mm) SFSDT = Color = Double Ended = Notch up, Gold Flash 03.00 min. for = Double Row Coded Cable For (X) specify straight on balance S end option Blue *Teflon Cable (SFSD only) S for single ended (Pin 1 to Pin N-1) (82.60 mm) and D for 03.25 min. for double ended. 30 D end option NDS = 30 AWG 28C CABLE No. of Positions = Notch down, (X)R COLOR CODING x (1.27) .050 straight + (0.38) .015 = Retention Latch (Pin 1 to Pin 2) PIN COLOR SFSD(T) (TFM-WT option required for mating) Board Mates: 1 BROWN NUX TFM, TFC 2 RED = Notch up, (X)S (SR & DR requires 3 ORANGE crossed = Screw Down End 1 Notch (Pin 1 to Pin N) WT option) 4 YELLOW (6.35) (Not available in -03, (Always Up) .250 5 GREEN -04 & -50 positions) NDX (Mates with 6 VIOLET = Notch down, TFM-DS option) 7 GRAY SPECIFICATIONS crossed 8 WHITE (11.18) (Pin 1 to Pin 1) .440 Insulator Material: 9 BLACK Black LCP 10 BLUE Contact Material: ETC REPEAT BeCu Plating: Assembled Length Au over 50 (1.27 m) Ni (3.18) *DuPont Teflon is a Current Rating: .125 registered trademark of the 2.9 A per pin E.I. du Pont de Nemours (2 pins powered) and Company or its affiliates. Operating Temp Range: End 2 -10 C to +80 C (PVC) notch -40 C to +125 C (*Teflon ) location Notes: determined Voltage Rating: Teflon cable is intended by part 275 VAC (PVC) for crimp only. Contact number 235 VAC (*Teflon ) Samtec for solderable cable Wire: applications. SFSD OR SFSDT DNUS SR 28 or 30 AWG For wiring option information refer to drawings on web. View complete specifications at: samtec.com SFSD & samtec.com SFSDT POSITIONS ROW WIRE OPTION PLATING ISDF SERIES 01 - PER ROW - OPTION - - GAUGE - - 03, 04, 05, D M CC03R 2830 GF = Double = Metal = Contact, Full Reel = 28 to 30 = Gold flash 07, 10, 15, Row Retention (35,000 Parts per Reel) AWG contact 20, 25, 40, 50 Latch (Standard sizes) CC03M G S = Contact, Mini Reel = 10 (0.25 m) No. of Positions = Screw (1,000 - 5,000 Parts Gold on contact x (1.27) .050 + (0.38) .015 Down per Reel) (6.35) .250 (15.37) .605 (11.18) .440 (6.32) (3.81) .249 .150 D M S TOOLING Hand Tool: CAT-HT-203-2830-12 Mini Applicator: CAT-MC-203-2830-XX-01 Clamp for mounting hand tool: CAT-HT-MNT-01 Extraction Tool: CAT-EX-169-01 Note: Some lengths, styles and options are non-standard, View complete specifications at: samtec.com ISDF, samtec.com CC03R & samtec.com CC03M non-returnable. F-221 samtec.com/127mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Rectangular Cable Assemblies category: Click to view products by Samtec manufacturer: Other Similar products are found below : MC320E-N-23 A08KR08KR26E203B G125FC10668L0-0300L G125FC10668L0-0150L G125-FC11068L0-0150L G125-FC11068L0-0300L A06XAF06XAF22K254B A10XAF10XAF22K152B A13KR13KR26E254B A12SUR12SUR32W203A A16KR16KR26E203B A12KR12KR26E305A A12KR12KR26E305B A12ZR12ZR28H203B A12ZR12ZR28H203A A10SR10SR30K254A A09SR09SR30K305A A14KR14KR26E254A A14KR14KR26E254B A10ZR10ZR28H254A A09ZR09ZR28H305A A09ZR09ZR28H305B A13ZR13ZR28H203A A15KR15KR26E254A A13KR13KR26E305B A11ZR11ZR28H254A A11ZR11ZR28H254B A11SR11SR30K254A A12SUR12SUR32W254A A10ZR10ZR28H305A A14KR14KR26E305B A10ZR10ZR28H305B A12ZR12ZR28H254A A15KR15KR26E305A A15KR15KR26E305B A11SR11SR30K305A A11ZR11ZR28H305A A11ZR11ZR28H305B A13ZR13ZR28H254A A12SUR12SUR32W305A A12ZR12ZR28H305A A12ZR12ZR28H305B A20XAF20XAF22K51B A13ZR13ZR28H305A A20XAF20XAF22K102B A20XAF20XAF22K152B A20XAF20XAF22K203B A20XAF20XAF22K254B A20XAF20XAF22K305B A16XSR16XSR36R254B