SMPM-PS-P-HG-ST-EM-1 Samtec

SMPM TO 65 GHz SMPM END 1 END 2 OVERALL LENGTH SERIES Cable Assemblies - CONNECTOR - CONNECTOR - RF047-A, RF086, RF23C RF047-A M0SP XXXX = (1.2 mm) .047 overshield DIA = SMPM Straight Plug, Full Detent = Overall Length in millimeters 29 AWG millimeter cable 0100 (0100 mm) 3.94 minimum M0SJ (RF047-A, RF086) RF086 = SMPM Straight Jack = (2.18 mm) .086 overshield DIA 0152 (0152 mm) 5.984 minimum 23 AWG millimeter cable M0RJ (RF23C) = SMPM Right-angle Jack RF23C (RF047-A only) = MWC-2350CU-01 millimeter wave cable with copper foil shield M0BJ = SMPM Straight Bulkhead Jack (RF047-A only) VSWR RF047-A: 1.40 max. RF086: 1.40 max. ALSO AVAILABLE RF23C: 1.40 max. 1.85 mm, 2.40 mm, 2.92 mm = RF086 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm = RF047-A 2.40 mm, 2.92 mm = RF23C INTERFACE STANDARD SMPM (CATCHERS MITT) CONNECTORS FOR INDUSTRY STANDARD CABLES Cable Connectors (2.134) .084 (2.082) .082 PRFM0 PRFM0-J-C-EE-047A-BD .047 Temp-Flex, low loss flexible, 29 AWG PRFM0-J-C-EE-085-BD Harbour SS405, flexible alternative to RG 405 (2.235) (3.556) .088 .140 (2.184) (3.454) PRFM0-J-C-EE-047A-RD .047 Temp-Flex, low loss flexible, 29 AWG .086 .136 DIA PRFM0-J-C-EE-086-SD .086 Temp-Flex, low loss flexible P-C = Cable Plug J-C = Cable Jack PRFM0-J-C-EE-047B-SD .047 Temp-Flex, low loss flexible, 28 AWG EE = Plating (50 Gold center contact, & outer contact) HG = Plating (30 Gold center contact, 10 Gold outer contact) PRFM0-P-C-HG-047A-SD .047 Temp-Flex, low loss flexible, 29 AWG SD = Straight, Direct Solder BD = Bulkhead, Direct Solder PRFM0-J-C-HG-047A-SD .047 Temp-Flex, low loss flexible, 29 AWG RD = Right-angle, Direct Solder SMPM GENDER TYPE PLATING ORIENTATION TERMINATION SMPM 1 - - - - - - Board Connectors SMPM-SM, SMPM-TH, SMPM-RA PF P HG ST EM = Full Detent = PCB = 30 (0.76 m) = Straight = Drop-in Cable Mates: Mount Gold center contact, Edge Mount RF047-A, RF086, RF23C 10 (0.25 m) (ST only) PS RA Gold outer contact = Smooth Bore = Righ-angle (ST only) (TH required) TH = Through-hole PC HF = Catchers Mitt = 30 (0.76 m) (STTH only) SM (3.76) Gold center contact, = Surface Mount .148 3 (0.08 m) DIA (ST only) Gold outer contact (RA only) (3.43) (4.06) .135 .160 (7.37) EE DIA (6.50) .290 (5.61) .221 = 50 (1.27 m) .256 Gold center contact (4.06) (3.99) .160 and outer body .157 (SM only) (3.40) (3.99) (3.68) .134 (3.68) DIA .157 .145 .145 SQ DIA (4.19) .165 (4.06) (3.18) .160 .125 (3.05) .120 STSM1 STTH1 RATH1 STEM1 F-221 (Rev 05MAY21) samtec.com/SMPM Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.SMPM TO 65 GHz SMPM GENDER GENDER ORIENTATION OPTION PRFIA SMPM - - - - - Bullet Adaptor PRFIA Mates With: J J S 1 SMPM, GPPB = Jack = Jack = Straight = (5.33) .210 2 (12.70) .500 (8.31) .327 (5.33) .210 = (8.31) .327 (0.89) .035 (2.26) 3 .089 =(12.70) .500 DIA (2.44) .096 DIA (2.44) .096 DIA (2.39) .094 DIA 4 = (4.22) .166 OPTION 1 OPTION 2 OPTION 3 (4.22) .166 (0.56) .022 (2.31) .091 DIA (2.41) .095 DIA OPTION 4 GANGED SMPM SOLUTIONS BOARD-TO-BOARD GANGED, MULTI-POSITION SMPM BLOCKS Series: GPPB Mates with: PRFIA FEATURES High-density, space-saving design 8.33 mm (.328 ) pitch (3.56 mm (.140 ) pitch in development) Push-on interface with varying retention forces Bullet adaptors enable blind mate applications accommodating axial and radial misalignment Board height options: 4.22 mm (.166 ) , 5.33 mm (.210 ), 8.31 mm (.327 ), 12.70 mm (.500 ) CABLE-TO-BOARD GANGED, MULTI-POSITION SMPM CABLE ASSEMBLY Cable Assembly: GC47 Board Mate: GPPC FEATURES High-density, space-saving design Pitch: 3.56 mm (.140 ) Push-on interface for quick installation .047 low-loss flexible microwave/millimeter wave cable Applications include: 5G wireless, mmWave, military/defense, telecom, radar, test & measurement, applications that are space limited and require high operating frequency F-221 (Rev 05MAY21) samtec.com/SMPM Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.