SMP TO 40 GHz SMP END 1 END 2 OVERALL SERIES - CONNECTOR - CONNECTOR - LENGTH Cable Assemblies RF25S, RF405 RF25S 00SJ7 XXXX = MWC-2550-01 microwave cable = SMP Straight Jack = Overall Length in with 25 AWG solid FEP dielectric millimeters 00RJ7 0100 (100 mm) 3.94 RF405 = SMP Right-angle Jack minimum = RG 405 (.086 ) 24 AWG semi-flexible microwave cable ALSO AVAILABLE SMA = RF25S SMA = RF405 VSWR RF25S: Contact Samtec RF405: Contact Samtec SMP INTERFACE STANDARD CONNECTORS FOR INDUSTRY STANDARD CABLES Cable Connectors (FULL DETENT) PRF00 PRF00-J-C-EE-047A-RD .047 Temp-Flex, low loss flexible, 29 AWG (0.89) .035 (0.64) .025 PRF00-J-C-EE-085A-SD .085, semi-rigid, 23 AWG ACCEPTS (0.38) (3.43) PRF00-PF-C-KK-047D-BD .047, semi-rigid .015 DIA .135 X DIA (1.78) MAX070 DIA J-C = Cable Jack PIN EE = Plating (50 Gold center contact & outer contact) KK = Plating (100 Gold over Nickel center contact, passivated outer contact) BD = Bulkhead, Direct Solder (2.79) SD = Straight, Direct Solder .110 (0.89) RD = Right-angle, Direct Solder .035 (1.37) .054 (0.559) .0220 (0.38) .015 (3.61) (2.95) DIA (3.18) .142 .116 .125 DIA DIA DIA (1.40) .055 (1.14) .045 F-221 samtec.com/SMP Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.SMP TO 40 GHz SMP GENDER TYPE PLATING ORIENTATION TERMINATION SMP - - - - - Board Connectors SMP-TH, SMP-EM Cable Mates: PF P GF ST TH2 = Plug, Full Detent = PCB = 10 (0.25 m) = Straight = Through-hole RF405, RF25S Mount Gold center contact, Gold Flash outer contact PL EM3 (TH2 only) = Plug, Limited Detent = Drop-in Edge Mount HH (Not available PS = 30 (0.76 m) Gold with PC) = Plug, Smooth Bore center and outer contact (EM3) PC = Plug, Catchers Mitt (5.78) .228 SQ (4.34) (5.08) .171 (4.19) .200 (5.99) .165 .236 (2.09) (4.09) .082 (4.06) (4.43) .161 .160 .174 (7.09) .279 (5.99) .236 SQ EM3 PF/PL/PSTH2 PCTH2 SMP BULLET TYPE PLATING ORIENTATION SMP J - - - - - LENGTH Bullet Adaptor SMP-B B GF ST 0645 = Bullet = 10 (0.25 m) = Straight = 6.45 mm (.254 ) Adaptor Gold center contact, Gold Flash outer contact 1450 = 14.50 mm (.571 ) APPLICATION SMP Board Connector (7.00) .276 (3.55) SMP-B (3.40) .140 .134 Bullet DIA DIA Adaptor (14.50) (8.00) (4.36) (6.45) .571 .315 .172 .254 SMP Board 0645 1450 Connector Compensates for axial & radial misalignment F-221 samtec.com/SMP Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.