AE REVISION AE NOTES: SQW-1XX-01-XXX-D-VS-XX-XXX 1. REPRESENTS A CRITICAL DIMENSION.C No OF POSITIONS POLARIZATION OPTION 2. POSITIONS -04 THRU -50 ARE TO BE TUBED. DO NOT -02 THRU -50 -XXX: INDICATES POSITION POLARIZED 3. POSITIONS 02 & 03 ARE TO BE LAYERED PACKAGED. SCALE FROM (PER ROW) (USE PK-07-N, SEE FIG 2, SHT 2) 4. MAXIMUM CUT FLASH: .010 .25 . THIS PRINT OPTION 5. STAKED ALIGNMENT PIN USED AT SAMTECS DISCRETION. LEAD STYLE 6. MEASURE THE HEIGHT FROM THE EDGE, NOT THE BREAK OFF. -A: STAKED & MOLDED IN ALIGNMENT PIN -01 7. MEASURED AT BEND RADIUS, NOT END OF PIN. PLATING SPECIFICATION (5 POS MIN) (USE SM-A8H, SEE FIG 3, SHT 2) 8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, -LC: LOCKING CLIP (5 POS MIN) -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA AE THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. (USE LC-07-TM, SEE FIG 4, SHT 2 & NOTE 8) MATTE TIN ON TAIL SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL -P: PICK & PLACE PAD (4 POS MIN) -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA ASSEMBLIES WITH THE -LC OPTION. AE (USE LMP-03, SEE FIG 6, SHT 2) MATTE TIN ON TAIL -TR: TAPE & REEL -S: 30 SELECTIVE GOLD IN CONTACT AREA (AVAILABLE POS 4 THRU 28) MATTE TIN ON TAIL -K: POLYAMIDE FILM PAD (4 POS MIN) -STL: 30 SELECTIVE GOLD IN CONTACT AREA (USE K-500-300, SEE FIG 7, SHT 2) TIN/LEAD (93/7+/-5%) TAIL (.005 .13 THICKNESS WITH SILICONE ADHESIVE) -H: 30 HEAVY GOLD IN CONTACT AREA 3 ON TAIL TAIL STYLE -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA -VS: VERTICAL MATTE TIN ON TAIL -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA ROW SPECIFICATION MATTE TIN ON TAIL -SM: 30 SELECTIVE GOLD IN CONTACT AREA -D: DOUBLE (USE SQW-XX-D) MATTE TIN ON TAIL C ((No OF POS x .07874 2.000 ) + .0117 .297 ) .010 .25 (No OF POS x .07874 2.000 ) - .07874 2.000 REF 02 .157 4.00 .07874 2.0000 REF REF C .0900 2.286 01 2 MAX SWAY IN-PROCESS (EITHER DIRECTION) SQW-XX-D .059 1.50 REF .203 5.16 +4 .250 6.35 90 REF -0 REF .0500 1.270 (SEE NOTE 7) C .015 0.38 .006 .15 REF 2 MAX SWAY .015 0.37 REF (EITHER DIRECTION) .0197 0.500 REF (TYP) C-97-01-XXX .034 0.87 REF .187 4.75 REF FIG 1 SQW-110-01-XXX-D-VS SHOWN UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION TOLERANCES ARE: CONFIDENTIAL AND PROPRIETARY TO DECIMALS ANGLES SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 DISCLOSED TO OTHERS OR USED FOR ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 PURPOSE OTHER THAN THAT WHICH IT WAS .XXXX: .0020 .051 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: INSULATOR: LCP, UL 94 VO, COLOR: BLACK 2MM SOCKETS TRIP ASSEMBLY TERMINAL: PHOSPHOR BRONZE DWG. NO. SQW-1XX-01-XXX-D-VS-XX-XXX BY: DEAN P 04/22/1997 SHEET OF1 3 F: DWG MISC MKTG SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRWREVISION AE 02 14 01 AE .050 1.27 FIG 2 .056 1.42 REF POLARIZATION OPTION LOCATION LC-07-TM C INSERT PK-07-N INTO SPECIFIED FIG 4 (No OF POS x .07874 2.000 ) .010 0.25 REF POSITION AND BREAK OFF TAB -LC: LOCKING CLIP - .1575 4.000 .002 .51 SQW-110-01-XXX-D-VS-014 SHOWN (5 POS MIN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) AE SQW-110-01-XXX-D-VS-LC SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) .0350 0.889 REF .035 0.89 (SEE NOTE 6) SM-A8H .0430 1.092 REF FIG 3 FIG 5 C -A: MOLDED ALIGNMENT PIN -A: STAKED ALIGNMENT PIN (No OF POS x .07874 2.000 ) AE AE (5 POS MIN) (5 POS MIN) - .1575 4.000 .002 .51 SQW-110-01-XXX-D-VS-A SHOWN SQW-110-01-XXX-D-VS-A SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)(SEE NOTE) .305 7.75(SEE NOTE) (No OF POS x .07874 2.000 ) + .0117 .297 /2 - .1125 2.858 C L .202 5.13 REF .225 5.72 REF C L C L C L .1673.0050 4.2500.127 FIG 7 POLYAMIDE FILM PAD NOTE: (4 POS MIN) = USED MEASURED DIMENSION (REF) SQW-110-01-XXX-D-VS-K SHOWN = - .1673 4.25 ) / 2 .020 .51 .308 7.82 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN FIG 6 e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. -P: PICK & PLACE PAD DESCRIPTION: DO NOT SCALE DRAWING (4 POS MIN) 2MM SOCKETS TRIP ASSEMBLY SQW-110-01-XXX-D-VS-P SHOWN DWG. NO. SHEET SCALE: 4:1 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) SQW-1XX-01-XXX-D-VS-XX-XXX F: DWG MISC MKTG SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW BY: DEAN P 04/22/1997 SHEET OF2 3