SSQ-101-01-S-S Samtec

F-219 SSW12501GS SSQ11603LT (2.54 mm) .100 THROUGH-HOLE .025 SQ POST SOCKET Mates With: SPECIFICATIONS NO. PINS TSW, MTSW, MTLW, PIN CENTERS TYPE STRIP PER ROW For complete specifications EW, ZW, TSS, ZSS, see www.samtec.com SSW TSM, TSSH, HTSS or www.samtec.com SSQ Insulator Material: Black Liquid Crystal Polymer = (2.54 mm) .100 Centers = Solder Tail 1 (-S & -D) or SSW Black High Temperature Thermoplastic (-T) Contact Material: Phosphor Bronze (2.54) (5.08) Plating: = Square Tail .100 .200 SSQ Au or Sn over 50 (1.27 m) Ni Current Rating (SSW/TSM): 4.7 A per pin (2 pins powered) Current Rating (SSQ/TSW): 6.3 A per pin 1 2 49 50 (2 pins powered) (2.41) Operating Temp Range: .095 S -55 C to +125 C with Gold -55 C to +105 C with Tin Insertion Depth: (2.54) .100 x No. of Positions + (0.51) .020 (3.68 mm) .145 to (6.35 mm) .250 100 98 4 2 Normal Force: Standard= 125 grams (4.4 N) Max Cycles: (2.54) (4.95) .100 .195 100 with 10 (0.25 m) Au D Voltage Rating: 465 VAC / 655 VDC 99 97 3 1 (2.54) RoHS Compliant: .100 Yes 150 147 6 3 PROCESSING (2.54) LeadFree Solderable: .100 (5.08) (7.49) Yes: .200 .295 T -S and -D row option Wave only: -P, -T and -Q row option 148 145 4 1 RECOGNITIONS 150 147 6 3 01 For complete scope of recognitions see thru www.samtec.com/quality (5.08) (7.49) 50 .200 .295 Q FILE NO. E111594 148 145 4 1 (8.51) .335 Note: (2.54) .100 x No. of Spaces Some lengths, styles and options are non-standard, RA non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.SSW12502GDRA SSW13001GS SSW11302TTRA SSW11822FT SSW, SSQ SERIES THROUGH-HOLE .025 SQ POST SOCKET LEAD ROW PLATING TAIL OTHER STYLE OPTION OPTION OPTION OPTION LL F S RA = Locking Lead = Gold flash on contact, = Single Row = Right-angle Matte Tin on tail (Leave blank for straight pin Two leads per strip crimped in opposite directions on or near centerline. P version) Available on tails from (2.29 mm) .090 L = Single Row to (7.87 mm) .310 only. N/A with single = 10 (0.25 m) Gold on contact, (36 pins max) row 1 or 2 positions. Matte Tin on tail D G = Double Row XXX = 20 (0.51 m) Gold on contact, = Polarized Gold flash on tail (Specify XXX as position number) T = Triple Row T = Matte Tin (-T N/A on LIF contacts) ALSO AVAILABLE Q (MOQ Required) = Double Row Other platings .200 (5.08 mm) row space (Outer rows filled only) Notch option Straight Pin Versions (Specify LEAD STYLE from chart) SINGLE LEAD STYLE S & P T D Q DOUBLE OR Standard Low TRIPLE Insertion Insertion Force Force* A 01 21 (2.64) .104 (4.93) .194 02 22 (10.00) .394 03 23 A (14.83) .584 04 24 Not (2.54) (5.08) (3.15) .124 (2.54) 06** .100 .100 .200 Available SSW SSQ (5.08) * LIF not available with Tin Plating (0.41) (0.79) (0.64) x SQ .200 .016 .031 .025 **Style 06 Not available with SSQ Right-Angle Versions (Specify LEAD STYLE from chart) T S & P D Q SINGLE LEAD STYLE DOUBLE TRIPLE (S ) (D) (T & Q) Standard Low Insertion Insertion A A A Force Force* (1.52) .060 A A A A (2.54) (2.54) (2.54) 02 22 .100 .100 .100 (7.62) (7.62) Not 03 23 .300 .300 Available (2.54) .100 SSW SSQ (12.45) Not Not (5.08) (0.41) (0.79) 04 24 (0.64) x .490 Available Available SQ .200 .016 .031 .025 (2.54) .100 *LIF not available with Tin Plating Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.