REVISION BD SSQ-1XX-XX-XXX-X-XX-XXX-XX-XX No OF POSITIONS OPTION -01 THRU -50 **-MW: METAL WASHER (SEE FIG 7, SHT 3) (PER ROW) DO NOT (N/A WITH -LL OR -RA) LEAD STYLE SCALE FROM (N/A WITH -T) THIS PRINT (SEE TABLE 1) (AVAILABLE ON -01, -02, -21, & -22 STYLES ONLY) -01 THRU -04: STANDARD INSERTION FORCE (AVAILABLE ON POS -02 THRU -30 ONLY) -21 THRU -24: LOW INSERTION FORCE OPTION PLATING SPECIFICATION -LL: LOCKING LEAD (SEE FIG 6, SHT 2) -G: 20 GOLD IN CONTACT AREA, (N/A WITH SINGLE ROW, 1 OR 2 POS) 3 SELECTIVE GOLD ON TAIL POLARIZATION OPTION -T: MATTE TIN ON ENTIRE PIN INDICATE POS (SEE FIG 8, SHT 3) (NOT AVAILABLE FOR -21 THROUGH -24 LEAD STYLES) -S: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL OPTION -H: 30 GOLD IN CONTACT AREA, 3 SELECTIVE GOLD ON TAIL -RA: RIGHT ANGLE (SEE FIG 2, SHT 2) (N/A ON LEAD STYLE -01) -F: 3 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. ROW SPECIFICATION -TL: TIN/LEAD (90/105%) ON ENTIRE PIN (AVAILABLE ONLY ON LEAD STYLE -01) -S: SINGLE, USE SSW-XX-S -TM: MATTE TIN ON ENTIRE PIN -D: DOUBLE, USE SSW-XX-D (NOT AVAILABLE FOR -21 THROUGH -24 LEAD STYLES) -T: TRIPLE, USE SSW-XX-T -SM: 30 SELECTIVE GOLD IN CONTACT AREA, -Q: TRIPLE (SEE FIG 4, SHT 2) USE SSW-XX-T MATTE TIN ON TAIL. (-T WITH ONLY 2 OUTER ROWS FILLED) -FM: 3 SELECTIVE GOLD IN CONTACT AREA, -P: POLARIZED, MATTE TIN ON TAIL. USE SSW-XX-P (SEE FIG 5, SHT 2) -L: 10 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. ** - MW OPTION, DO NOT DESIGN IN. -STL: 30 SELECTIVE GOLD IN CONTACT AREA, SAMTEC WILL ONLY SUPPORT EXISTING (NO OF POS x .100 2.54 + .020 0.51 ) TIN/LEAD (90/105%) ON TAIL BUSINESS AS OF 02/12/2002 .010 0.25 (AVAILABLE ONLY ON LEAD STYLE -01) (SEE NOTE 7 & 10) .295 7.49 REF .195 4.95 REF .335 8.51 REF .095 2.41 REF (FOR MACHINE FILL, SEE NOTE 11) .100 2.54 A .100 2.54 -S .025 0.64 SQ 2 MAX SWAY -T -D (EITHER DIRECTION) REF (TYP) (SEE NOTE 4) FIG 1 SSQ-1XX-XX-X SHOWN 25 NOTES: 1. REPRESENTS A CRITICAL DIMENSION.C 2. MINIMUM PUSHOUT FORCE: 1.5 LB. UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION 3. MAXIMUM ALLOWABLE BOW: .003 .08 INCH/INCH. CONFIDENTIAL AND PROPRIETARY TO 4. MAXIMUM ALLOWABLE SWAY: HAND FILL 4 (TYP). TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED MACHINE FILL 1 (TYP). DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 5. MAXIMUM VARIATION BETWEEN PIN ROWS: .010 0.25 XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS (SEE NOTE 8) 6. END WALLS AFTER CUTTING SHOULD BE .020 .003 0.51 .08 .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 7. MAXIMUM CUT FLASH: .010 0.25 . CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 8. SHEAR LOCATION TO BE WITHIN .001 0.03 OF THE MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: BREAK OFF CENTER LOCATION FOR MACHINE FILL0145 0.368 REF INSULATOR: LCP, UL 94 VO, COLOR: BLACK ASSEMBLY, SOCKET STRIP .025 0.64 SQ TAIL 9. NOTCH ON -P-RA OPTION TO BE ORIENTED AS SHOWN. CONTACT: PHOS BRONZE DWG. NO. 10. NO FLASH IS ALLOWED BELOW LEADS OR IN HOLES OF BODY. DETAIL A 11. +.000 0.00 /-.005 0.13 FOR MACHINE FILL ONLY, SSQ-1XX-XX-X-S, SSQ-1XX-XX-XXX-X-XX-XXX-XX-X SCALE 16 : 1 SSQ-1XX-XX-X-D, SSQ-1XX-XX-X-T (IN-PROCESS), SSQ-1XX-XX-X-S-RA. BY: PURVIS 06/12/1987 SHEET OF1 3 F: DWG MISC MKTG SSQ-1XX-XX-XXX-X-XX-XXX-XX-X-MKT.SLDDRWREVISION BD REF (SEE TABLE 2, SHT 1) 90 SEE NOTE 9 .06 1.5 .100 2.54 .200 5.08 .200 5.08 .200 5.08 FIG 5 SSQ-1XX-XXX-X-RA-P SHOWN (DIFFERENT AS SHOWN, FIG 2 OTHERWISE SAME AS FIG 2) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) FIG 4 SSQ-1XX-X-S-RA FIG 3 SSQ-1XX-XXX-X-Q-RA SHOWN SSQ-1XX-X-D-RA IN PROCESS RIGHT ANGLE (DIFFERENT AS SHOWN, SSQ-1XX-X-T-RA OTHERWISE SAME AS FIG 1, FIG 2) SSQ-1XX-X-P-RA -S-LL -D-LL -T-LL/-Q-LL -S-RA-LL -D-RA-LL -T-RA-LL/-Q-RA-LL .040.010 1.020.25 (TYP) .040 1.02 (TYP) .008.002 0.200.05 .008.002 0.200.05 (TYP) (TYP) STRAIGHT VERSION RIGHT ANGLE VERSION C L C L C L PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: FIG 6 DO NOT SCALE DRAWING ASSEMBLY, SOCKET STRIP .025 0.64 SQ TAIL -LL: LOCKING LEAD DWG. NO. = CRIMP LOCATION SHEET SCALE: 2:1 (DIFFERENT AS SHOWN, SSQ-1XX-XX-XXX-X-XX-XXX-XX-X OTHERWISE SAME AS FIG 1) F: DWG MISC MKTG SSQ-1XX-XX-XXX-X-XX-XXX-XX-X-MKT.SLDDRW BY: PURVIS 06/12/1987 SHEET OF2 3