TIGER EYE HIGH-RELIABILITY IDC HEADER CABLE (2.00 mm) .0787 PITCH TCMD SERIES TCMD NO. PINS END OVERALL TRANSFER OTHER SERIES 01 Mates: - PER ROW - OPTION - LENGTH - - OPTION - OPTION SMM*, MMS*, ESQT, PTF, SQT, SQW, TLE Leave blank for TCMD 04,05, 07 S XX.XX P XX S and D = Terminal = Single End = Assembled = Position 08, 10, 12, End Options. SPECIFICATIONS Strip Length Polarization For T End 13, 15, 17, (Specify XX as D Option Specify Insulator Material: position number. 20, 22, 25 = Double End N Black Glass Filled Polyester Requires Transfer (Standard sizes) (Socket has notch Terminal: End. Only Socket T polarization) Phosphor Bronze is polarized.) = Transfer End Plating: Au or Sn over B XX 50 (1.27 m) Ni = Breakout Wire: (Specify XX 28 AWG 7/36 Stranded, Tinned, as number of Copper with conductors to Gray PVC Insulator be broken out) Current Rating: 2.6 A per pin RW (2 pins powered) 01 = Reverse Wiring Operating Temp Range: (Blue or black -40 C to +105 C wire opposite (4.00) .158 position 1) D XX ALSO AVAILABLE = Daisy Chain No. of positions x (2.00) .0787 Other sizes + (4.00) .158 SR (MOQ Required) = Strain Relief (Not available (5.08) with O, M, R, .200 Assembled Length DXX or BXX) in INCHES (1/8 ) 2 inches minimum R = Reverse M = Middle Reverse Assembled Length (XX.XX) (Requires DXX) Single End (S) O = Outside Reverse (Requires DXX) 01 02 XX Position Polarization (P XX) 5 max. Transfer End (T) Double End (D) 2 min. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. XX 2 1/8 Breakout (B XX) min. Double Row Connectors 01 No. of positions x Outer (2.00) .0787 + (7.874) .3100 Most (End of assembly) *Note: 02 4 minimum Standard TCMD callout Reverse Wiring (RW) Daisy Chain (D XX) will not mate with SMM, MMS. Strain Relief (SR) Must use gold plated callouts. (See drawing on web.) When mated with a socket, Wire 1 mates with Pin 2 Wire 2 mates with Pin 1, etc. Note: Reverse (R) Middle Reverse (M) Outside Reverse (O) TCMD Series assemblies are non-standard, non-returnable. F-221 samtec.com TCMD Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice. IDCX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Ribbon Cables / IDC Cables category: Click to view products by Samtec manufacturer: Other Similar products are found below : FSK-12A AWG28-10G EHJ3C EHJ4C cab-LVDV-PWR-10-15 FSP-25A 3365/15 (100FT) cab-LVDV-DAT-34-15 49635-C62-S2 1-3636- 600-5204 92315-1408 426171120-3 3625/08 (100M) 0044704 2-1589735-3 JSM015PP2DCC23N 92301-0283 ACL-eSSI-2 92301-0718 MMSDT-06-20-S-05.5-D-K-LDX IDD-04-G NM-2J2-051-PS1-JJAB 1700/14SF (100FT) 1700/26SF (100FT) 1700/34SF (100FT) 3801/09 (100FT) 119-885 DS1057-09A282R-30.5 DS1057-12A282R-30.5 DS1057-14A282R-76.5 DS1057-20A282R-76.5 DS1057-30A282R-76.5 DS1057-34A282R-76.5 DS1057-40A282R-76.5 DS1057-60A282R-76.5 DS1057-64A282R-76.5 DS1058-08M28-30.5 DS1058-30M28-30.5 3750/10 (100FT) 0015712 0015905 S30109 11203 11223 11243 11262 0037147 0022512 0022412 0022416
