F-219 TIGER TCMD08D02.5001R EYE TCMD20D02.5001 (2.00 mm) .0787 TCMD SERIES HIGH-RELIABILITY IDC HEADER CABLE Mates with: TYPE NO. PINS END OVERALL TRANSFER OTHER SMM*, MMS*, ESQT, 01 STRIP PER ROW OPTION LENGTH OPTION OPTION PTF, SQT, SQW, TLE SPECIFICATIONS For complete specifications Leave blank for S and D see www.samtec.com TCMD End Options. For T End Insulator Material: Option Specify N XX.XX 04, 05, Black Glass Filled Polyester (Socket has notch polarization) = Assembled Length Terminal: 06, 07, Phosphor Bronze Assembled Length Plating: in INCHES (1/8 ) 08, 10, 12, Au or Sn over 2 inches minimum 50 (1.27 m) Ni 13, 15, 17, Wire: 28 AWG 7/36 Stranded, 20, 22, 25 Tinned, Copper with Gray PVC Insulator (Standard sizes) Current Rating: 2.6 A per pin Strain relief option (2 pins powered) Operating Temp Range: P XX SR -40 C to +105 C = Position Polarization = Strain Relief RoHS Compliant: = Single End = Double End S D 01 Yes No. of positions x (2.00) .0787 + (7.874) .3100 RECOGNITIONS 02 For complete scope of recognitions see Not available with O, M, www.samtec.com/quality R, DXX or BXX Specify XX as position =Transfer End number. Requires D XX T FILE NO. E111594 Transfer End. Only = Daisy Chain Socket is polarized. 1 XX 2 1/8 min. Double ALSO AVAILABLE Row B XX (MOQ Required) Connectors = Breakout Outer Other sizes Most Specify XX as number of (End of conductors to be broken out. assembly) 4 minimum 4 R =Terminal Strip TCMD = Reversed XX 5 max. 2 min. 5 Breakout starts with Number 1 01 lead indicated by brown wire or red stripe. Shown on top side. 2 M (4.00) = Middle Reverse .158 RW = Reverse Wiring No. of positions x (2.00) .0787 + (4.00) .158 (1.00) Requires DXX .03937 5 *Note: Standard TCMD callout will not mate with SMM, MMS. O (5.08) Must use gold plated callouts200 = Outside Reverse 01 (See drawing on web.) When mated with a socket, Wire 1 mates with Pin 2 (3.05) 02 Wire 2 mates with Pin 1, etc120 (0.50) (2.00) (2.00) Note: Blue or black wire .020 .0787 .0787 TCMD Series assemblies are SQ opposite position 1. Requires DXX non-standard, non-returnable. 3 5 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. IDCX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Samtec manufacturer: Other Similar products are found below : ESQT-135-03-F-D-380 QTE-060-01-L-D-A MSAS-179-ZUGG-18 MTSW-103-07-F-S-240 BCS-116-L-S-TE ERF8-020-05.0-S-DV-K-TR ERF8-060-05.0-L-DV-K-TR IDMD-10-T-12.00-A-G-R SFML-115-01-S-D SFML-125-01-S-D LSHM-120-02.5-L-DV-A-N-K-TR ESQ-110- 14-G-D ESQT-125-03-F-D-310 SO-0515-01-01-02 FJH-50-D-12.00-4 CES-150-01-T-D QTE-040-04-L-D-A QTH-020-04-F-D-DP-A-K-TR QTH-060-01-F-D-A QTH-090-04-L-D-A TCSD-10-S-05.00-01-F-N TCSD-15-D-02.00-01-N TFM-115-02-L-DH TFM-120-12-S-D-LC TFML-140-02-S-D TLW-107-05-G-D BDL-136-T-E TSS-132-01-G-S TST-113-04-S-D-RA TSW-105-14-F-D MMS-110-01-H-DH HPF- 03-02-T-S DW-25-11-L-D-450 ERF8-020-01-L-D-RA-L-TR ERF8-040-05.0-L-DV-TR SL-120-T-10 SLM-115-01-S-D CLP-132-02-G-D TFC-125-02-F-D-A-K TSW-202-07-T-S ISDF-25-D-M IPT1-105-01-S-D-RA IPL1-125-01-S-D-RA ICO-422-L-GT HTSW-116-15-L-S-LL HTSW-103-08-L-S-RA ESQ-116-33-T-T ERM8-020-02.0-S-DV-TR TCSD-10-D-06.00-01-N TCSD-20-D-12.00-01-N