NOTES: REVISION AU TCSD-XX-X-XX.XX-01-X-XXX-XXX 1. HIDDEN LINES ARE USED TO SHOW POLARIZATION WHEN USING -N OPTION. OPTIONS 2 C 2. REPRESENTS A CRITICAL DIMENSION. No OF POSITIONS SEE OPTIONS BELOW 3. AS OF REV C ON TCB-50 CABLE DO NOT 03, 04, 05, 07, 08, 10, 12, ASSEMBLIES WILL BE LEAD FREE. SCALE FROM OPTIONS 1 13, 15, 17, 20, 22, 25 4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED THIS PRINT NOTE: OTHER POSITIONS SEE OPTIONS BELOW FOR SHORTS AND OPENS. AVAILABLE AS ASO. TOOL 5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 800V. PLATING OPTION IS CAPABLE OF POSITIONS 2-25 6. STRAIN RELIEF TO WITHSTAND 5LB STRAIGHT PULL. -F: FLASH SELECTIVE GOLD, MATTE TIN TAIL 7.WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY NOT EXTEND PAST THE CABLE INSULATION. -L: LIGHT SELECTIVE GOLD, MATTE TIN TAIL 8. REFERENCE TCSD-XX-XX-X-X-XXX PRINT FOR CONNECTOR ASSEMBLY AND ITS REQUIREMENTS. END ASSEMBLY (LEAVE BLANK FOR STANDARD -S: 9. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND PAST THE -S: SINGLE SELECTIVE PLATING) CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE THICKNESS ON CONSECUTIVE -D: DOUBLE AND LESS THAN 50% OF THE CABLE THICKNESS ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR. ASSEMBLY LENGTH 10. FOR LENGTHS LESS THAN 12.5 TOLERANCE SHALL BE +/-.125, LEAD STYLE -X, -R, -M & -O OPTION: 2.00 50.8 MINIMUM ALL OTHER LENGTHS SHALL BE +/-1%. ALL OTHER OPTION: 1.00 25.4 MINIMUM -D: (DOUBLE END) -S (SINGLE END) XX.XX XX INCHES x 25.4 1% (SAME AS -D UNLESS OTHERWISE STATED) (SEE NOTE 7 & 10) C C XX.XX XX INCHES x 25.4 1% (SEE NOTE 7 & 10) .125 3.18 REF .158 4.00 REF COLORED WIRE TO SIDE (No OF POS x .07874 2.0000 ) + .15748 4.0000 REF OF FIRST POS. INDICATOR .010 0.25 MAX * COLORED WIRE MAY BE C 2 BLACK, BLUE, OR RED. CABLE OVERHANG (TYP) .200.010 5.080.254 (SEE NOTE 7) -N OPTION -N OPTION NOTCH DENOTES .040 1.02 REF -RN1 OPTION FIRST POSITION -RN2 OPTION 1 PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, 02 -RW: REVERSE WIRING THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS (NOT AVAILABLE WITH -RN1 OR -RN2 OPTIONS) TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES COLORED WIRE TO OPPOSITE INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 SIDE OF FIRST POS. INDICATOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 01 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 .051 e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: .040 1.02 .125 3.18 INSULATOR: BLACK PBT 2MM DOUBLE ROW FEMALE IDC ASSEMBLY CONTACT: HEAT TREATED BeCu REF REF STRAIN RELIEF: BLACK PBT DWG. NO. WIRE: 28 AWG, 7/36, TINNED, COPPER WITH PVC INSULATOR -N: NOTCH POLARIZATION PLATING: -L: .000015 GOLD ON CONTACT AREA, TIN ON REMAINDER TCSD-XX-X-XX.XX-01-X-XXX-XXX (USE TCSD-XX-XX-N) -F: .000003 GOLD ON CONTACT AREA, TIN ON REMAINDER (STANDARD PLATING IS .000030 GOLD ON CONTACT AREA, TIN ON REMAINDER) (AVAILABLE ON POS 04 THRU 25) SHEET OF BY: B RAY 11/20/2007 1 3 F: DWG MISC MKTG TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW-M: MIDDLE REVERSED -O: OUTSIDE REVERSED REVISION AU (NOT AVAILABLE WITH -R OR -O) (NOT AVAILABLE WITH -R OR -M) (MINIMUM 2.00 50.8 , 1.00 25.4 INCREMENTS) (MINIMUM 2.00 50.8 , 1.00 25.4 INCREMENTS) -X: POLARIZED MATING 01 02 03 01 02 03 02 01 01 02 01 01 01 01 COLORED WIRE TO SIDE COLORED WIRE TO SIDE OF FIRST POS. INDICATOR OF FIRST POS. INDICATOR * COLORED WIRE MAY BE * COLORED WIRE MAY BE BLACK, BLUE, OR RED. BLACK, BLUE, OR RED. NOTE: THE SAME POSITION WILL BE XX.125 3.18 POLARIZED ON BOTH ENDS (USE PK-07-N) XX .125 3.18 (MIN 2 ) (MIN 2) -RN1 OR -RN2 (REVERSE POLARIZATION NOTCH) TCSD-05-D-XX-01-RN2 SHOWN MIDDLE SOCKET REVERSED OUTSIDE SOCKET REVERSED WHEN DAISY CHAINED WHEN DAISY CHAINED -R: REVERSE CONNECTOR -X: DAISY CHAINED (NOT AVAILABLE WITH -O, -M, -RN1 OR -RN2 OPTION) (2 MIN LENGTH, 1 INCREMENTS ONLY) (MINIMUM 2.00 50.8 , 1.00 25.4 INCREMENTS) FIRST CONNECTOR SECOND CONNECTOR TCSD-05-D-XX-01-RN1 SHOWN 01 01 01 02 01 COLORED WIRE TO SIDE 01 OF FIRST POS. INDICATOR 01 02 * COLORED WIRE MAY BE BLACK, BLUE, OR RED. COLORED WIRE TO SIDE OF FIRST POS. INDICATOR XX .125 3.18 * COLORED WIRE MAY BE (MIN 2 ) BLACK, BLUE, OR RED. PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, NOTE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, -RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE AVAILABLE FOR POSITIONS 4 OR GREATER OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .XX .125 3.18 6.70 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY (NOT AVAILABLE WITH -R OR -RW OPTIONS) PHONE: 812-944-6733 FAX: 812-948-5047 (MIN 2 ) OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 -RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY WRITTEN CONSENT OF SAMTEC, INC. (NOT AVAILABLE WITH -R OR -RW OPTIONS) DESCRIPTION: DO NOT SCALE DRAWING (REVERSE NOTCH NOT AVAILABLE WITH DAISY CHAIN OPTIONS) 2MM DOUBLE ROW FEMALE IDC ASSEMBLY BOTH SOCKETS REVERSED WHEN DAISY CHAINED DWG. NO. SHEET SCALE: 2:1 TCSD-XX-X-XX.XX-01-X-XXX-XXX F: DWG MISC MKTG TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW SHEET OF BY: B RAY 11/20/2007 2 3