F-218
TCSD
TIGER
TMM
TCSD08D02.0001NR
.26" (6.6 mm)
EYE
(2.00 mm) .0787" TCSD SERIES
TIGER EYE IDC SOCKET CABLE
Mates with:
NO. PINS END
TYPE PLATING OTHER
TMM, TMMH, STMM,
LENGTH
01 N
PER ROW OPTION
MMT, TW, MTMM, EHT, STRIP OPTION OPTION
ETMM (-SR), ZSTMM
SPECIFICATIONS
For complete specifications
see www.samtec.com?TCSD N
04, 05,
XX.XX
= Notch Polarization
Insulator Material:
= Assembled Length
06, 07,
Black Glass Filled Polyester
Contact:
Assembled Length
1
08, 10, 12,
BeCu in INCHES ( /)
8
2 inches minimum
Plating:
= Gold flash on contact
13, 15, 17,
Au or Sn over 50 (1.27 m) Ni F
Wire:
Leave blank for standard plating:
20, 22, 25
28 AWG 7/36 Stranded,
30 (0.76 m) Gold on contact area
Tinned, Copper with (Standard sizes)
Gray PVC Insulator
Current Rating (TCSD/STMM):
2.8 A per pin
(2 pins powered)
Operating Temp Range:
S D SR
-40 C to +105 C P XX
Lead Size Accepted: = Single End = Double End = Strain Relief
= Position Polarization
(0.48 mm) .019" to
(0.53 mm) .021"
No. of positions x
Insertion Depth:
(2.00) .0787 + (7.874) .3100
(2.87 mm) .113" to
(3.17 mm) .125"
01
RoHS Compliant:
Yes
02
Not available with O, M,
RECOGNITIONS
R, DXX or BXX
Specify XX as position
TCSD
For complete scope of
number. Same position
recognitions see = Socket Strip
will be polarized on
www.samtec.com/quality
D XX
(3.17)
both ends.
(1.02) .125
1 = Daisy Chain
.040
FILE NO. E111594
01
XX
2"
B XX
1/8"
min.
= Breakout
Double
(4.00)
Row
.158
Connectors
Specify XX as number of
conductors to be broken out. Outer
Most
No. of positions x (2.00) .0787 + (4.00) .157
(End of
(1.00) .039
assembly)
4" minimum
4
ALSO AVAILABLE
(5.08)
XX
.200
(MOQ Required)
R
Other sizes 5"max. = Reversed
2"min.
(2.00) (2.00)
Other platings
.0787 .0787 Breakout starts with Number 1
lead indicated by brown wire or
Contact Samtec.
red stripe. Shown on top side.
5
2
EJECTOR HEADERS &
POLARIZING KEY
M
LOCKING CLIPS
= Middle Reverse
RW
Specify PK-01-07 for
= Reverse Wiring
polarizing key (Available
See TMM Series.
in wheels of six each).
Also polarizes SMM 5
Requires DXX
Series socket strips.
Ejector headers
01
O
Locking clips
= Outside Reverse
Strain relief option
02
Blue or black wire
Note:
See EHT Series.
TCSD Seriesassemblies are opposite position #1.
3 5
Requires DXX
non-standard, non-returnable.
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtecs specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
IDCX-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Ribbon Cables / IDC Cables category:
Click to view products by Samtec manufacturer:
Other Similar products are found below :
FSK-12A Ribbon Cable, 6 Pin, 500mm AWG28-10G EHJ3C EHJ4C EHJ5C cab-LVDV-PWR-10-15 FSP-25A Ribbon Cable, 4 Pin, 350mm
Ribbon Cable, 6 Pin, 300mm cab-LVDV-DAT-34-15 49635-C62-S2 1-3636-600-5204 92315-1408 100063-0094 100063-0106 100063-0102
100063-0104 MMSD-02-20C-F-15.00-S-K 100063-0099 100063-0105 100063-0095 100063-0103 100063-0093 100063-0091 2200000068
100063-0092 100063-0101 100063-0100 100063-0097 TFSDT-08-28-H-15.00-S S1SD-02-30-GF-09.00-L MMSD-02-22C-F-15.00-S-K
S1SS-02-28C-GF-02.00-L S1SDT-02-28-GF-03.00-L 2-1589735-3 JSM015PP2DCC23N 92301-0283 TCSD-22-D-26.00-01 S1SST-07-30-
GF-06.00-L T2SD-20-24-L-07.87-TR-NUS DS1057-01-44A282R-30.5 FFSD-06-S-17.00-01-N IDSS-03-D-20.00-T TCMD-17-S-36.00-01-
SR 92301-0718 839023 490107670612S MMSDT-06-20-S-05.5-D-K-LDX IDD-04-G