DO NOT SCALE FROM THIS PRINT NOTES: TFC-1XX-XX-XX-D-XX REVISION AL C 1. REPRESENTS A CRITICAL DIMENSION. OPTION 2. MINIMUM CONTACT RETENTION: 12 OZS. No OF POSITIONS -A: ALIGNMENT PIN (USE TFM-XX-D-XX-A, 3. MINIMUM LOCKING CLIP RETENTION: 8 OZS. LEAD STYLE -01, -02: -02 THRU -50 (ALL SEE TABLE 1, SHT 3) (SEE FIG 5, SHT 3) 4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005 0.13 . POSITIONS AVAILABLE) (NOT AVAILABLE WITH -RA) 5. MAXIMUM TERMINAL BURR: .003 0.08 . LEAD STYLES -11, -12: (-05 THRU -50 MULTIPLES OF 5) -LC: LOCKING CLIP (USE LC-05-TM) 6. COPLANARITY: .004 0.10 = POS 02 THRU 26 POSITIONS -12, -16, -17 ALSO AVAILABLE (NOT AVAILABLE WITH -RA) .006 0.15 = POS 27 THRU 50. LEAD STYLES -21, -22: (-05 THRU -50 MULTIPLES OF 5) (SEE FIG 6, SHT 3, NOTE 3 & 11) 7. MEASURED FROM BEND. POSITIONS -12 & -13 ALSO AVAILABLE 8. MEASURE FROM TIPS OF PIN. -P: PICK AND PLACE PAD (USE PPP-04) LEAD STYLES -31, -32: (-05 THRU -50 MULTIPLES OF 5) 9. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01 & -02 (AVAILABLE IN ALL POSITIONS -05 THRU -50) -12 POSITION ALSO AVAILABLE WILL BE SOLID AND WITHOUT SIDE SLOTS. (NOT AVAILABLE WITH -RA) 10. THIS FEATURE ONLY PRESENT ON -01 & -02 LEAD STYLES. (SEE FIG 7, SHT 3) 11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, -RA: RIGHT ANGLE LEAD STYLE THE LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC (AVAILABLE ONLY IN LEAD STYLE: -01) RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE (SEE FIG 8, SHT 2) THROUGH HOLE SURFACE MOUNT LC OPTION. -TR: TAPE AND REEL (SEE FIG 4, SHT 4) -01 (SEE FIG 1) -02 (SEE FIG 2, SHT 2) 12. NOTE DELETED. -11 (SEE FIG 1) -12 (SEE FIG 2, SHT 2) (FOR -X2 ONLY) -21 (SEE FIG 1) -22 (SEE FIG 2, SHT 2) (NOT AVAILABLE WITH -RA) -31 (SEE FIG 1) -32 (SEE FIG 2, SHT 2) -K: POLYIMIDE FILM (SEE FIG 3, SHT 2) (No. OF POSITIONS x .050 1.27 ) + .125 3.18 REF (ALL LEAD STYLES EXCEPT -21 AVAILABLE) (SEE TABLE 1, SHT 3) (NOT AVAILABLE FOR -RA) (USE K-DOT-.217-.313-.005) (No. OF POSITIONS x .050 1.27 ) + .025 .64 REF .110 2.79 PLATING SPECIFICATION REF -F: 3 FLASH GOLD ON CONTACT AREA, BODY SPECIFICATION MATTE TIN TAIL 02 -D: DOUBLE ROW -L: 15 SELECTIVE GOLD ON CONTACT AREA, MATTE TIN TAIL .155 3.94 -LM: 15 SELECTIVE GOLD ON CONTACT AREA, MATTE TIN TAIL REF -FM: 3 FLASH GOLD ON CONTACT AREA, MATTE TIN TAIL 01 .225 5.72 .050 1.27 REF .135 3.43 REF REF SEE NOTE 10 .075 1.91 REF (No. OF POSITIONS x .050 1.27 ) - .050 1.27 .050 1.27 .018 0.46 REF 2 MAX SWAY (EITHER DIRECTION) REF 2 MAX SWAY (EITHER DIRECTION) (SEE TABLE 1, SHT 3) .096 2.44 .1635 4.153 REF REF (SEE TABLE 1, SHT 3) SEE NOTE 9 .010 0.25 REF .014 0.36 REF.003 0.08 2 MAX SWAY (SEE TABLE 1, SHT 3) 2 MAX SWAY (EITHER DIRECTION) (EITHER DIRECTION) .050 1.27 (No. OF POSITIONS x .050 1.27 ) - .050 1.27 SECTION PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: FIG 1 AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE THROUGH HOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .003 0.08 .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 -01, -11, -21, -31 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 (SEE TABLE 1, SHT 3) OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 DESCRIPTION: INSULATOR: .050 X .050 TERMINAL STRIP LCP, UL 94-V0 DWG. NO. COLOR: BLACK IN-PROCESS TFC-1XX-XX-XX-D-XX TERMINAL: PHOSPHOR BRONZE F: DWG MISC MKTG TFC-1XX-XX-XX-D-XX-MKT.SLDDRW BY: BRATCHER 05/25/2001 SHEET OF1 4 .006 0.15 NOTE: = OVERALL LENGTH (REF) REVISION AL = - .216 5.49 /2 .020 .51 (SEE TABLE 1, SHT 3) .005.020 0.110.508 .216 5.49 3 2 (SEE TABLE 1, SHT 3) SEE NOTE 6 SEE NOTE 9 FLUSH TO .012 0.30 MAX 7 (-12, -22 & -32 STYLES) (SEE NOTE 7) 3 (-02 STYLE ONLY) 3 MAX SWAY SEE NOTE 10 .235 5.97 MAX (EITHER DIRECTION) (SEE NOTE) 01 03 (SEE TABLE 1, SECTION (SEE NOTE) SHT 3) 02 SEE NOTE 10 (No. OF POSITIONS x .050) -.050 1.27 (TOL ACCUM .005 0.13 OVER 50 POS) FIG 2 SURFACE MOUNT FIG 3 -02, -12, -22, -32 DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1 -K: POLYIMIDE FILM PAD NOTCH TO BE REF TERMINAL 2 ORIENTED AS SHOWN (SEE TABLE 1, (SEE TABLE 1, SHT 3) 02 SHT 3) TERMINAL 1 (SEE TABLE 1, SHT 3) .075 1.91 REF 01 .014 0.36 REF (TYP) .020 0.51 2 MAX SWAY (SEE NOTE 8) (EITHER DIRECTION) 90 .050 1.27 (SEE NOTE 8) FIG 8 SECTION -RA OPTION DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1 .422 10.72 REF .422 10.72 TERMINAL 2 (SEE TABLE 1, TERMINAL 2 (SEE TABLE 1, SHT 3) (SEE TABLE 1, SHT 3) SHT 3) F: DWG MISC MKTG TFC-1XX-XX-XX-D-XX-MKT.SLDDRW TERMINAL 1 PROPRIETARY NOTE * * .075 1.91 REF THIS DOCUMENT CONTAINS CONFIDENTIAL AND (SEE TABLE 1, PROPRIETARY INFORMATION AND ALL DESIGN, SHT 3) CARRIER STRIP MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, TERMINAL 1 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE I.D. MARK 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR (SEE TABLE 1, SHT 3) REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 90 .020 0.51 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .050 X .050 TERMINAL STRIP IN-PROCESS 1 DWG. NO. (ORIENT I.D. MARK AS SHOWN) SHEET SCALE: 2:1 IN-PROCESS 2 (FOR -RA OPTION ONLY) TFC-1XX-XX-XX-D-XX BY: BRATCHER 05/25/2001 SHEET OF2 4