F-215
TFM11502LS
TFM11002LDLC
SYSTEM
TFM11001LDRE1WT
TFML11502LDK
(1,27 mm) .050"
SMT & THROUGH-HOLE HEADER
Shrouded body
for blind mating
(1,27 mm x 1,27 mm)
TFM Mates with:
SPECIFICATIONS
.050" x .050"
SFM, SFMC, SFSD
micro pitch
For complete speci cations and
TFML Mates with:
recommended PCB layouts
SFML
see www.samtec.com?TFM or
www.samtec.com?TFML
TFM-DH Mates with:
APPLICATIONS
Insulator Material:
SFM (-DH), SFMC,
Black Liquid Crystal Polymer
SFSDX (S, -D, -SR, -DR)
Terminal Material:
Phosphor Bronze
Plating:
Au or Sn over 50" (1,27 m) Ni
Current Rating (TFM/SFM):
3.2 A per pin
(1 pin powered per row)
TFM-DH to SFM-DH SHOWN
Voltage Rating:
250 VAC mated with SFM
Operating Temp Range:
-55C to +125C
RoHS Compliant: Yes
Processing:
Lead-Free Solderable: Yes Surface mount or
SMT Lead Coplanarity:
Through-hole tails
TFM to SFM-SH SHOWN
(0,10 mm) .004" max (05-25)
(0,15 mm) .006" max (30-50)
RECOGNITIONS
TYPE NO. PINS PLATING
For complete scope
LEAD STYLE
1
of recognitions see
STRIP PER ROW OPTION
www.samtec.com/quality
FILE NO: 090871_0_000
Specify
L
03, 04, 06, 08
= 15" (0,38 m)
(TFM 01 & 02 only) LEAD STYLE
TFM
Gold on post,
MATED HEIGHT from chart
= Standard
Matte Tin on tail
05, 07, 10, 15, 20,
LEAD STYLE
MATED (Call Samtec for
HEIGHT*
TFM SFM E.L.P. plating option)
25, 30, 35, 40, 45, 50
TFML
02 (6,35) .250 = Locking
(Standard sizes)
(01 & 02
(8,13) .320
12
02 lead style only)
(9,91) .390
22
(1,27) .050 x
(11,81) .465 No. of Positions + (3,18) .125
32
(2,79)
LEAD STYLE MATED .110
HEIGHT*
TFM SFM
(4,45)
LEAD
01 (5,97) .235 LEAD
.175
STYLE
BC
STYLE A
(5,97) .235 (T/H)
03
(SMT)
01
SINGLE ROW
(5,59) (1,97)
(7,75) .305
11
01 02 (5,72) .225 (1,14)
.220 .078
(See website for DS & WT OAL) .045
(7,75) .305
13 01 (7,49) .295
12*
(5,59) (2,77)
03*
REX = (1,27) .050 x
(9,53) .375 .220 .109
21 22* (9,27) .365
No. of Positions + (6,68) .263
(1,27)
(7,37) (1,97)
02 (1,27)
(9,53) .375 (11,18) .440
23 32*
11*
.050
.290 .078
.050
* N/A with 07, -DH or
DIA
31 (11,43) .450
(7,37) (2,77) A
-S row option
13* (5,72)
.290 .109
*Processing conditions will affect (SMT or TH)
.225
mated height.
(9,14) (1,97)
21*
.360 .078
01
(9,14) (2,77)
(1,27) .050
OTHER
23* DOUBLE ROW
.360 .109
(0,46) .018 DIA
SOLUTIONS
(11,05) (1,97)
31*
.435 .078
(1,40)
Lower cost plating options. * N/A with 07 or -S row
.055
option
B A
See TFC Series.
(2,35)
(1,42)
(0,64) .093
C (0,36) .014 .056
.025
LC WT
THROUGH-HOLE SURFACE MOUNT
Note: Some sizes, styles and (SMT or TH) (01 & 02 ONLY)
options are non-standard,
non-returnable.
WWW.SAMTEC.COM
Due to technical progress, all designs, speci cations and components are subject to change without notice.TFM10501LDRA
TFML15001LDLC
TFM12501LDWT
TFM11002LDH
TFM11002LDDS
TFM, TFML SERIES
Shrouded body for
(1,27 mm) blind mating
.050" pitch
Passes 10 Year MFG
Locking option
Surface mount or
Locking clip option
Through-hole tails
Weld tab option
Mates with SFM for
Screw down Screw Down option
coplanar mating Weld tab
option
option
ROW
OPTION
OPTION
Specify only RA, RE1 or RE2 Specify only A, LC, DS or WT SMT lead styles only
S
Not available with RA, RE1 and RE2 Specify only K or P
= Single Row
RA
unless otherwise noted.
(TFM only)
= Right Angle K
(Lead style 01 only) A = Polyimide Film Pick & Place Pad
= Alignment Pin
D
= Double Row
RE1 P
= Right Angle Elevated for (1,58 mm) .062" PCB LC = Plastic Pick & Place Pad
(Requires TFM lead style 01, D row and WT) = Locking Clip (5 positions minimum)
DH*
(Manual Placement required) (Not available with
= Double Horizontal
5 position with WT)
(TFM lead style 02 only)
RE2
(05 thru 50 positions only)
= Right Angle Elevated for (2,36 mm) .093" PCB DS
Specify TR last
(TR option only
(Requires TFM lead style 01, D row and WT) = Dual Screw Down for
available)
(1,60 mm) .062" PCB TR
(05, 07, 10, 15, 20, 25, 30, = Tape & Reel
35, 40 positions only) (Not available with DS)
(TFM lead styles 01 and 02 only)
(Requires D row option)
(Mates with SFMDS option and
SFSD/SFSDT SS and DS option only)
(Not available with A, LC,
(1,91)
WT, K, P, TR)
(0,76)
.075
.030
(0,51)
(2,26)
(1,27)
.020
.089 WT
.050
RA = Weld Tab
DH* ALSO AVAILABLE
(TFM lead styles 01 and 02 only)
(MOQ Required)
(Required callout for RE1 & RE2)
(Mates to SFSS/SFSD SR and
Solder nail option
DR option only)
(6,48)
Other sizes
(05, 07, 10, 15, 20, 25, 30, 35,
.255
Other platings
(1,99) 40, 45, 50 positions only)
.079
(3,81)
Contact Samtec.
.150
* Note: Weld tab is standard on DH option.
No need to specify WT.
DS
RE1 & RE2
(D, 01 & 02 ONLY)
WWW.SAMTEC.COM
Due to technical progress, all designs, speci cations and components are subject to change without notice.