TFM-120-22-S-D-P-TR Samtec

F-215 TFM11502LS TFM11002LDLC SYSTEM TFM11001LDRE1WT TFML11502LDK (1,27 mm) .050 SMT & THROUGH-HOLE HEADER Shrouded body for blind mating (1,27 mm x 1,27 mm) TFM Mates with: SPECIFICATIONS .050 x .050 SFM, SFMC, SFSD micro pitch For complete speci cations and TFML Mates with: recommended PCB layouts SFML see www.samtec.com TFM or www.samtec.com TFML TFM-DH Mates with: APPLICATIONS Insulator Material: SFM (-DH), SFMC, Black Liquid Crystal Polymer SFSDX (S, -D, -SR, -DR) Terminal Material: Phosphor Bronze Plating: Au or Sn over 50 (1,27 m) Ni Current Rating (TFM/SFM): 3.2 A per pin (1 pin powered per row) TFM-DH to SFM-DH SHOWN Voltage Rating: 250 VAC mated with SFM Operating Temp Range: -55C to +125C RoHS Compliant: Yes Processing: Lead-Free Solderable: Yes Surface mount or SMT Lead Coplanarity: Through-hole tails TFM to SFM-SH SHOWN (0,10 mm) .004 max (05-25) (0,15 mm) .006 max (30-50) RECOGNITIONS TYPE NO. PINS PLATING For complete scope LEAD STYLE 1 of recognitions see STRIP PER ROW OPTION www.samtec.com/quality FILE NO: 090871 0 000 Specify L 03, 04, 06, 08 = 15 (0,38 m) (TFM 01 & 02 only) LEAD STYLE TFM Gold on post, MATED HEIGHT from chart = Standard Matte Tin on tail 05, 07, 10, 15, 20, LEAD STYLE MATED (Call Samtec for HEIGHT* TFM SFM E.L.P. plating option) 25, 30, 35, 40, 45, 50 TFML 02 (6,35) .250 = Locking (Standard sizes) (01 & 02 (8,13) .320 12 02 lead style only) (9,91) .390 22 (1,27) .050 x (11,81) .465 No. of Positions + (3,18) .125 32 (2,79) LEAD STYLE MATED .110 HEIGHT* TFM SFM (4,45) LEAD 01 (5,97) .235 LEAD .175 STYLE BC STYLE A (5,97) .235 (T/H) 03 (SMT) 01 SINGLE ROW (5,59) (1,97) (7,75) .305 11 01 02 (5,72) .225 (1,14) .220 .078 (See website for DS & WT OAL) .045 (7,75) .305 13 01 (7,49) .295 12* (5,59) (2,77) 03* REX = (1,27) .050 x (9,53) .375 .220 .109 21 22* (9,27) .365 No. of Positions + (6,68) .263 (1,27) (7,37) (1,97) 02 (1,27) (9,53) .375 (11,18) .440 23 32* 11* .050 .290 .078 .050 * N/A with 07, -DH or DIA 31 (11,43) .450 (7,37) (2,77) A -S row option 13* (5,72) .290 .109 *Processing conditions will affect (SMT or TH) .225 mated height. (9,14) (1,97) 21* .360 .078 01 (9,14) (2,77) (1,27) .050 OTHER 23* DOUBLE ROW .360 .109 (0,46) .018 DIA SOLUTIONS (11,05) (1,97) 31* .435 .078 (1,40) Lower cost plating options. * N/A with 07 or -S row .055 option B A See TFC Series. (2,35) (1,42) (0,64) .093 C (0,36) .014 .056 .025 LC WT THROUGH-HOLE SURFACE MOUNT Note: Some sizes, styles and (SMT or TH) (01 & 02 ONLY) options are non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.TFM10501LDRA TFML15001LDLC TFM12501LDWT TFM11002LDH TFM11002LDDS TFM, TFML SERIES Shrouded body for (1,27 mm) blind mating .050 pitch Passes 10 Year MFG Locking option Surface mount or Locking clip option Through-hole tails Weld tab option Mates with SFM for Screw down Screw Down option coplanar mating Weld tab option option ROW OPTION OPTION Specify only RA, RE1 or RE2 Specify only A, LC, DS or WT SMT lead styles only S Not available with RA, RE1 and RE2 Specify only K or P = Single Row RA unless otherwise noted. (TFM only) = Right Angle K (Lead style 01 only) A = Polyimide Film Pick & Place Pad = Alignment Pin D = Double Row RE1 P = Right Angle Elevated for (1,58 mm) .062 PCB LC = Plastic Pick & Place Pad (Requires TFM lead style 01, D row and WT) = Locking Clip (5 positions minimum) DH* (Manual Placement required) (Not available with = Double Horizontal 5 position with WT) (TFM lead style 02 only) RE2 (05 thru 50 positions only) = Right Angle Elevated for (2,36 mm) .093 PCB DS Specify TR last (TR option only (Requires TFM lead style 01, D row and WT) = Dual Screw Down for available) (1,60 mm) .062 PCB TR (05, 07, 10, 15, 20, 25, 30, = Tape & Reel 35, 40 positions only) (Not available with DS) (TFM lead styles 01 and 02 only) (Requires D row option) (Mates with SFMDS option and SFSD/SFSDT SS and DS option only) (Not available with A, LC, (1,91) WT, K, P, TR) (0,76) .075 .030 (0,51) (2,26) (1,27) .020 .089 WT .050 RA = Weld Tab DH* ALSO AVAILABLE (TFM lead styles 01 and 02 only) (MOQ Required) (Required callout for RE1 & RE2) (Mates to SFSS/SFSD SR and Solder nail option DR option only) (6,48) Other sizes (05, 07, 10, 15, 20, 25, 30, 35, .255 Other platings (1,99) 40, 45, 50 positions only) .079 (3,81) Contact Samtec150 * Note: Weld tab is standard on DH option. No need to specify WT. DS RE1 & RE2 (D, 01 & 02 ONLY) WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.