NOTES: TFM-1XX-XX-XXX-D-XXX REVISION FG C OPTION 1. REPRESENTS A CRITICAL DIMENSION. No OF POSITIONS 2. MINIMUM PUSHOUT FORCE FOR CONTACTS, WELD TABS, -A: ALIGNMENT PIN (USE TFM-XX-D-XX-A, AND THREADED INSERTS: 12 OZ. LEAD STYLE -01, -02, -03: -02 THRU -50 (ALL SEE TABLE 1) (SEE FIG 8, SHT 3) POSITIONS AVAILABLE) DO NOT 3. MINIMUM LOCKING CLIP RETENTION: 8 OZS. (NOT AVAILABLE FOR -RA OR -REX) SCALE FROM 4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005 0.13 -LC: LOCKING CLIP (USE LC-05-TM) LEAD STYLES -11, -12, -13: (-05 THRU -50 MULTIPLES OF 5) THIS PRINT 5. MAXIMUM TERMINAL BURR: .003 0.08 (NOT AVAILABLE FOR -RA OR -REX) POSITIONS 12, 16, 17 ALSO AVAILABLE 6. COPLANARITY: .004 0.10 = POS 02 THRU 26 (SEE FIG 10, SHT 3 & NOTES 3 & 11) C LEAD STYLES -21, 22, 23: (-05 THRU -50 MULTIPLES OF 5) .006 0.15 = POS 27 THRU 50 POSITIONS 12 & 13 ALSO AVAILABLE -P: PICK AND PLACE PAD (USE PPP-04) LEAD STYLES 31, 32: 12 POSITION ALSO AVAILABLE (AVAILABLE IN ALL POSITIONS -05 THRU 7. MEASURED FROM BEND. -50 EXCEPT -05 WITH -WT) 8. DIMENSION CHANGED PER REVISION AD. CONTACT ENGINEERING (NOT AVAILABLE FOR -RA OR -REX, FOR INFORMATION. LEAD STYLE SEE FIG 7, SHT 3) 9. MEASURE FROM TIPS OF PIN. -RA: RIGHT ANGLE 10. THIS FEATURE ONLY PRESENT ON -01 &-02 LEAD STYLES. THROUGH HOLE SURFACE MOUNT (AVAILABLE ONLY IN LEAD STYLE: -01 11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, -01, -03 (SEE FIG 1) -02 (SEE FIG 2) SEE FIG 5, SHT 2) THE LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC -11, -13 (SEE FIG 1) -12 (SEE FIG 2) -TR: TAPE AND REEL (SEE FIG 4, SHT 7) RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -21,-23 (SEE FIG 1) -22 (SEE FIG 2) (NOT AVAILABLE WITH -DS OPTION -31 (SEE FIG 1) -32 (SEE FIG 2) LC OPTION. OR THROUGH HOLE LEAD STYLE) 12. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01, -02 & -03 PLATING SPECIFICATION -SA: STAKED ALIGNMENT PIN (SEE FIG 9, SHT 3) WILL BE SOLID AND WITHOUT SIDE SLOTS. -S: 30 SELECTIVE GOLD ON CONTACT AREA, (ONLY AVAILABLE ON SURFACE MOUNT 13. NOTE DELETED. MATTE TIN TAIL LEAD STYLE) -L: 15 SELECTIVE GOLD ON CONTACT AREA, -K: POLYIMIDE FILM (SEE FIG 3, SHT 2) (No OF POSITIONS x .050 1.27 ) + .125 3.18 REF MATTE TIN TAIL (USE K-DOT-.217-.313-.005) -F: 3 FLASH GOLD ON CONTACT AREA, (NOT AVAILABLE FOR -RA OR -REX) (No OF POSITIONS x .050 1.27 ) + .025 .64 REF MATTE TIN TAIL (ALL LEAD STYLES EXCEPT -21 AVAILABLE) -H: 30 SELECTIVE GOLD ON CONTACT AREA, -WT: WELD TABS (USE WT-25-XX-T) .110 2.79 REF 3 FLASH GOLD ON TAIL 02 (AVAILABLE ON -01, -02 & -03 LEAD -SM: 30 SELECTIVE GOLD ON CONTACT AREA, STYLES ONLY) (SEE FIG 6, SHT 2) MATTE TIN TAIL (MATES WITH SFSS/SFSD -SR & -DR ONLY) -LM: 15 SELECTIVE GOLD ON CONTACT AREA, .155 3.94 (NOT AVAILABLE WITH -A, -LC, MATTE TIN TAIL REF -RA, OR -SA OPTIONS) -FM: 3 FLASH GOLD ON CONTACT AREA, -RE1: RIGHT ANGLE ELEVATED .062 PCB MATTE TIN TAIL (USE TFM-XX-D-01-RE, NOT AVAILABLE -STL: 30 SELECTIVE GOLD ON CONTACT AREA, 01 WITHOUT -WT, AVAILABLE IN LEAD TIN/LEAD (90/10 5%) TAIL STYLE -01 ONLY, -03 THRU -50 POS) .050 1.27 .225 5.72 .075 1.91 (MATES WITH SFSS/SFSD -SR & -DR ONLY) REF REF REF BODY SPECIFICATION (SEE FIG 11, SHT 4) SEE NOTE 10 -D: DOUBLE ROW -RE2: RIGHT ANGLE ELEVATED .093 PCB (USE TFM-XX-D-01-RE, NOT AVAILABLE C WITHOUT -WT, AVAILABLE IN LEAD .050 1.27 (No OF POSITIONS x .050 1.27 ) - .050 1.27 STYLE -01 ONLY, -03 THRU -50 POS) 2 MAX SWAY (MATES WITH SFSS/SFSD -SR & -DR ONLY) (EITHER DIRECTION) (SEE FIG 11, SHEET 4) .018 0.46 REF REF .135 3.43 REF -SN: SOLDER NAIL FOR .062 BOARD 2 MAX SWAY (TFM-XX-D-01-SN AND WT-27-01-T) (SEE TABLE 1, (EITHER DIRECTION) (SEE FIG12, SHT 3) SHT 7) (ONLY AVAILABLE WITH -02 LEAD STYLE) .096 2.44 (NOT AVAILABLE WITH OPTIONS -A, -LC, .1635 4.153 REF (SEE NOTE 8) -RA, -SA, -WT, -RE1 OR -RE2) (SEE TABLE 1, REF -SN2: SOLDER NAIL FOR .093 BOARD (TFM-XX-D-01-SN AND WT-27-02-T) SHT 7) (SEE FIG12, SHT 3) (ONLY AVAILABLE WITH -02 LEAD STYLE) (NOT AVAILABLE WITH OPTIONS -A, -LC, SEE NOTE 12 -RA, -SA, -WT, -RE1 OR -RE2) .010 0.25 REF -DS: DUAL SCREW DOWN FOR .062 BOARD .014 0.36 REF (SEE FIG 18, SHT 5) .003 0.08 C (ONLY AVAILABLE WITH -01 & -02 LEAD STYLE) C .050 1.27 (SEE TABLE 1, SHT 7) 2 MAX SWAY (NOT AVAILABLE WITH OPTIONS -A, -LC, -P, (EITHER DIRECTION) C -RA, -TR, -SA, -K, -WT, -RE1, -RE2, -SN, -SN2) 2 MAX SWAY (-01 LEAD STYLE USES TFM-XX-D-01-DSL (EITHER DIRECTION) & T1-M2-4-VSFM-T, 02 LEAD STYLE USES SECTION TFM-XX-D-01-DSA & T1-M2-4-VSFM-T) (No OF POSITIONS x .050 1.27 ) - .050 1.27 PROPRIETARY NOTE UNLESS OTHERWISE SPECIFIED, * * C THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE .003 0.08 C .XX: .01 0.3 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 FIG 1 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY (SEE TABLE 1, .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS THROUGH HOLE .XXXX: .0020 0.051 SHT 7) WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 -01, -03, -11, -13, -21, -23, -31 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 DESCRIPTION: INSULATOR: .050 X .050 TERMINAL STRIP LCP, UL 94-VO DWG. NO. COLOR: BLACK IN-PROCESS TFM-1XX-XX-XXX-D-XXX TERMINAL: PHOSPHOR BRONZE F: DWG MISC MKTG TFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW BY: garyp 11/5/2014 SHEET OF1 7.217 5.50.006 0.15 REVISION FG REF (SEE TABLE 1, (SEE TABLE 1,SHT 7) 90 SHT 7) C C 3 2 SEE NOTE 6 C SEE NOTE 12 FLUSH TO .012 0.30 MAX (SEE NOTE) 7 (-12, -22 & -32 STYLES) SEE NOTE 10 (SEE NOTE 7) 3 (-02 STYLE ONLY) C (SEE NOTE) 3 MAX SWAY .235 5.97 MAX (EITHER DIRECTION) (SEE TABLE 1, 01 03 SHT 7) SECTION 02 No OF POSITIONS x .050) - .050 1.27 SEE NOTE 10 NOTE: R = OVERALL LENGTH (REF) .005.020 0.130.508 (TOL ACCUM .005 0.13 S = (R - .216 5.49 /2 .020 .51 FIG 2 OVER 50 POS) SURFACE MOUNT FIG 3 -02, -12, -22, -32 -K: POLYIMIDE FILM PAD DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1 NOTCH TO BE REF TERMINAL 2 ORIENTED AS SHOWN (SEE TABLE 1, SHT 7) (SEE TABLE 1, 02 SHT 7) TFM-XX-D-XX-WT TERMINAL 1 (No OF POSITIONS X .050 1.27 ) + .263 6.68 REF (SEE TABLE 1, SHT 7) WT-25-04-T .075 1.91 REF 01 .014 0.36 C REF (TYP) .093 2.36 (TYP) 2 MAX SWAY .020 0.51 C C 90 (EITHER DIRECTION) .010 0.25 (SEE NOTE 9 & REF (TYP) C TABLE 1, SHT 7) .025 0.64 REF (No OF POSITIONS x .050 1.27 ) + .154 3.91 SECTION C .050 1.27 2 MAX SWAY (SEE NOTE 9 & (EITHER DIRECTION) TABLE 1, SHT 7) SECTION FIG 5 -RA OPTION FIG 6 DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1 -WT OPTION DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1 REF .422 10.72 .422 10.72 TERMINAL 2 (SEE TABLE 1, TERMINAL 2 (SEE TABLE 1, SHT 7) (SEE TABLE 1, SHT 7) SHT 7) F: DWG MISC MKTG TFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW TERMINAL 1 PROPRIETARY NOTE * * .075 1.91 REF THIS DOCUMENT CONTAINS CONFIDENTIAL AND (SEE TABLE 1, PROPRIETARY INFORMATION AND ALL DESIGN, SHT 7) CARRIER STRIP MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, TERMINAL 1 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE I.D. MARK 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR (SEE TABLE 1, SHT 7) PHONE: 812-944-6733 FAX: 812-948-5047 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS C e-Mail info SAMTEC.com code 55322 90 .020 0.51 C WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .050 X .050 TERMINAL STRIP IN-PROCESS 1 DWG. NO. (ORIENT I.D. MARK AS SHOWN) SHEET SCALE: 2:1 IN-PROCESS 2 (FOR -RA OPTION ONLY) TFM-1XX-XX-XXX-D-XXX BY: garyp 11/5/2014 SHEET OF2 7